diff -burN newlib-1.15.0/config.sub newlib-psp/config.sub
--- newlib-1.15.0/config.sub 2006-12-11 05:12:46.000000000 +0100
+++ newlib-psp/config.sub 2007-03-10 18:02:39.000000000 +0100
@@ -267,6 +267,7 @@
| mipsisa64sb1 | mipsisa64sb1el \
| mipsisa64sr71k | mipsisa64sr71kel \
| mipstx39 | mipstx39el \
+ | mipsallegrex | mipsallegrexel \
| mn10200 | mn10300 \
| mt \
| msp430 \
@@ -348,6 +349,7 @@
| mipsisa64sb1-* | mipsisa64sb1el-* \
| mipsisa64sr71k-* | mipsisa64sr71kel-* \
| mipstx39-* | mipstx39el-* \
+ | mipsallegrex-* | mipsallegrexel-* \
| mmix-* \
| mt-* \
| msp430-* \
@@ -690,6 +692,10 @@
basic_machine=m68k-atari
os=-mint
;;
+ psp)
+ basic_machine=mipsallegrexel-psp
+ os=-elf
+ ;;
mips3*-*)
basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
;;
diff -burN newlib-1.15.0/configure newlib-psp/configure
--- newlib-1.15.0/configure 2006-12-12 02:38:04.000000000 +0100
+++ newlib-psp/configure 2007-03-10 18:02:39.000000000 +0100
@@ -1561,6 +1561,9 @@
mips*-*-linux*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
+ mipsallegrex*-*-*)
+ noconfigdirs="$noconfigdirs target-libgloss"
+ ;;
mips*-*-*)
noconfigdirs="$noconfigdirs gprof ${libgcj}"
;;
diff -burN newlib-1.15.0/configure.in newlib-psp/configure.in
--- newlib-1.15.0/configure.in 2006-12-12 02:38:04.000000000 +0100
+++ newlib-psp/configure.in 2007-03-10 18:02:39.000000000 +0100
@@ -737,6 +737,9 @@
mips*-*-linux*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
+ mipsallegrex*-*-*)
+ noconfigdirs="$noconfigdirs target-libgloss"
+ ;;
mips*-*-*)
noconfigdirs="$noconfigdirs gprof ${libgcj}"
;;
diff -burN newlib-1.15.0/newlib/Makefile.am newlib-psp/newlib/Makefile.am
--- newlib-1.15.0/newlib/Makefile.am 2006-06-05 19:42:57.000000000 +0200
+++ newlib-psp/newlib/Makefile.am 2007-03-10 18:02:39.000000000 +0100
@@ -267,6 +267,18 @@
$(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/machine/`basename $$i`; \
else true; fi ; \
done; \
+ $(mkinstalldirs) $(DESTDIR)$(tooldir)/include/netinet; \
+ for i in $(srcdir)/libc/sys/$(sys_dir)/netinet/*.h; do \
+ if [ -f $$i ]; then \
+ $(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/netinet/`basename $$i`; \
+ else true; fi ; \
+ done ; \
+ $(mkinstalldirs) $(DESTDIR)$(tooldir)/include/arpa; \
+ for i in $(srcdir)/libc/sys/$(sys_dir)/arpa/*.h; do \
+ if [ -f $$i ]; then \
+ $(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/arpa/`basename $$i`; \
+ else true; fi ; \
+ done ; \
$(mkinstalldirs) $(DESTDIR)$(tooldir)/include/sys; \
for i in $(srcdir)/libc/include/sys/*.h; do \
$(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/sys/`basename $$i`; \
diff -burN newlib-1.15.0/newlib/Makefile.in newlib-psp/newlib/Makefile.in
--- newlib-1.15.0/newlib/Makefile.in 2006-12-18 21:32:41.000000000 +0100
+++ newlib-psp/newlib/Makefile.in 2007-03-10 18:02:39.000000000 +0100
@@ -912,6 +912,18 @@
$(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/machine/`basename $$i`; \
else true; fi ; \
done; \
+ $(mkinstalldirs) $(DESTDIR)$(tooldir)/include/netinet; \
+ for i in $(srcdir)/libc/sys/$(sys_dir)/netinet/*.h; do \
+ if [ -f $$i ]; then \
+ $(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/netinet/`basename $$i`; \
+ else true; fi ; \
+ done ; \
+ $(mkinstalldirs) $(DESTDIR)$(tooldir)/include/arpa; \
+ for i in $(srcdir)/libc/sys/$(sys_dir)/arpa/*.h; do \
+ if [ -f $$i ]; then \
+ $(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/arpa/`basename $$i`; \
+ else true; fi ; \
+ done ; \
$(mkinstalldirs) $(DESTDIR)$(tooldir)/include/sys; \
for i in $(srcdir)/libc/include/sys/*.h; do \
$(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/sys/`basename $$i`; \
diff -burN newlib-1.15.0/newlib/configure.host newlib-psp/newlib/configure.host
--- newlib-1.15.0/newlib/configure.host 2006-12-18 22:49:14.000000000 +0100
+++ newlib-psp/newlib/configure.host 2007-03-10 18:02:39.000000000 +0100
@@ -510,7 +510,7 @@
# NOTE: When newlib malloc uses a semaphore, RTEMS will switch to that.
*-*-rtems*)
default_newlib_io_long_long="yes"
- newlib_cflags="${newlib_cflags} -DMALLOC_PROVIDED -DEXIT_PROVIDED -DMISSING_SYSCALL_NAMES -DSIGNAL_PROVIDED -DREENTRANT_SYSCALLS_PROVIDED -DHAVE_OPENDIR -DNO_EXEC -DHAVE_FCNTL"
+ newlib_cflags="${newlib_cflags} -DMALLOC_PROVIDED -DEXIT_PROVIDED -DMISSING_SYSCALL_NAMES -DSIGNAL_PROVIDED -DREENTRANT_SYSCALLS_PROVIDED -DHAVE_OPENDIR -DNO_EXEC -DHAVE_FCNTL -DHAVE_RENAME -DHAVE_NANOSLEEP"
;;
# VxWorks supplies its own version of malloc, and the newlib one
# doesn't work because VxWorks does not have sbrk.
@@ -632,7 +632,14 @@
;;
mips*-*-elf*)
default_newlib_io_long_long="yes"
- newlib_cflags="${newlib_cflags} -DMISSING_SYSCALL_NAMES"
+ case "${host}" in
+ mipsallegrex*-psp-*)
+ sys_dir=psp
+ syscall_dir=syscalls
+ newlib_cflags="${newlib_cflags} -G0 -mno-explicit-relocs -DCOMPACT_CTYPE -DCLOCK_PROVIDED -DHAVE_FCNTL -DMALLOC_ALIGNMENT=16 -I${prefix}/psp/sdk/include" ;;
+ *)
+ newlib_cflags="${newlib_cflags} -DMISSING_SYSCALL_NAMES" ;;
+ esac
;;
mmix-*)
syscall_dir=syscalls
diff -burN newlib-1.15.0/newlib/libc/include/machine/time.h newlib-psp/newlib/libc/include/machine/time.h
--- newlib-1.15.0/newlib/libc/include/machine/time.h 2000-12-04 20:06:37.000000000 +0100
+++ newlib-psp/newlib/libc/include/machine/time.h 2007-03-10 18:02:39.000000000 +0100
@@ -9,6 +9,10 @@
#endif
#endif /* !__rtems__ */
+#if defined(__psp__)
+#define _CLOCKS_PER_SEC_ 1000000
+#endif
+
#endif /* _MACHTIME_H_ */
diff -burN newlib-1.15.0/newlib/libc/include/sys/config.h newlib-psp/newlib/libc/include/sys/config.h
--- newlib-1.15.0/newlib/libc/include/sys/config.h 2006-08-29 23:00:59.000000000 +0200
+++ newlib-psp/newlib/libc/include/sys/config.h 2007-03-10 18:02:39.000000000 +0100
@@ -98,6 +98,12 @@
#define __ATTRIBUTE_IMPURE_PTR__ __attribute__((__section__(".sdata")))
#endif
+/* We compile newlib with -G0 for PSP, but if we're compiling an app with $gp enabled,
+ then _impure_ptr is expected to live in .sdata. */
+#if defined(__psp__)
+#define __ATTRIBUTE_IMPURE_PTR__ __attribute__((__section__(".sdata")))
+#endif
+
#ifdef __xstormy16__
#define __SMALL_BITFIELDS
#undef INT_MAX
diff -burN newlib-1.15.0/newlib/libc/include/sys/types.h newlib-psp/newlib/libc/include/sys/types.h
--- newlib-1.15.0/newlib/libc/include/sys/types.h 2006-09-14 00:09:27.000000000 +0200
+++ newlib-psp/newlib/libc/include/sys/types.h 2007-03-10 18:02:39.000000000 +0100
@@ -199,52 +199,6 @@
typedef unsigned short nlink_t;
-/* We don't define fd_set and friends if we are compiling POSIX
- source, or if we have included (or may include as indicated
- by __USE_W32_SOCKETS) the W32api winsock[2].h header which
- defines Windows versions of them. Note that a program which
- includes the W32api winsock[2].h header must know what it is doing;
- it must not call the cygwin32 select function.
-*/
-# if !(defined (_POSIX_SOURCE) || defined (_WINSOCK_H) || defined (__USE_W32_SOCKETS))
-# define _SYS_TYPES_FD_SET
-# define NBBY 8 /* number of bits in a byte */
-/*
- * Select uses bit masks of file descriptors in longs.
- * These macros manipulate such bit fields (the filesystem macros use chars).
- * FD_SETSIZE may be defined by the user, but the default here
- * should be >= NOFILE (param.h).
- */
-# ifndef FD_SETSIZE
-# define FD_SETSIZE 64
-# endif
-
-typedef long fd_mask;
-# define NFDBITS (sizeof (fd_mask) * NBBY) /* bits per mask */
-# ifndef howmany
-# define howmany(x,y) (((x)+((y)-1))/(y))
-# endif
-
-/* We use a macro for fd_set so that including Sockets.h afterwards
- can work. */
-typedef struct _types_fd_set {
- fd_mask fds_bits[howmany(FD_SETSIZE, NFDBITS)];
-} _types_fd_set;
-
-#define fd_set _types_fd_set
-
-# define FD_SET(n, p) ((p)->fds_bits[(n)/NFDBITS] |= (1L << ((n) % NFDBITS)))
-# define FD_CLR(n, p) ((p)->fds_bits[(n)/NFDBITS] &= ~(1L << ((n) % NFDBITS)))
-# define FD_ISSET(n, p) ((p)->fds_bits[(n)/NFDBITS] & (1L << ((n) % NFDBITS)))
-# define FD_ZERO(p) (__extension__ (void)({ \
- size_t __i; \
- char *__tmp = (char *)p; \
- for (__i = 0; __i < sizeof (*(p)); ++__i) \
- *__tmp++ = 0; \
-}))
-
-# endif /* !(defined (_POSIX_SOURCE) || defined (_WINSOCK_H) || defined (__USE_W32_SOCKETS)) */
-
#undef __MS_types__
#undef _ST_INT32
diff -burN newlib-1.15.0/newlib/libc/include/time.h newlib-psp/newlib/libc/include/time.h
--- newlib-1.15.0/newlib/libc/include/time.h 2005-11-18 16:57:24.000000000 +0100
+++ newlib-psp/newlib/libc/include/time.h 2007-03-10 18:02:39.000000000 +0100
@@ -174,6 +174,16 @@
}
#endif
#endif /* _POSIX_TIMERS */
+#if defined(__psp__)
+#ifdef __cplusplus
+extern "C" {
+#endif
+int _EXFUN(nanosleep, (const struct timespec *rqtp, struct timespec *rmtp));
+#ifdef __cplusplus
+}
+#endif
+#endif /* __psp__ */
+
#ifdef __cplusplus
extern "C" {
diff -burN newlib-1.15.0/newlib/libc/sys/configure newlib-psp/newlib/libc/sys/configure
--- newlib-1.15.0/newlib/libc/sys/configure 2006-12-18 23:21:54.000000000 +0100
+++ newlib-psp/newlib/libc/sys/configure 2007-03-10 18:02:39.000000000 +0100
@@ -284,6 +284,7 @@
ac_subdirs_all="$ac_subdirs_all mmixware"
ac_subdirs_all="$ac_subdirs_all netware"
ac_subdirs_all="$ac_subdirs_all rdos"
+ac_subdirs_all="$ac_subdirs_all psp"
ac_subdirs_all="$ac_subdirs_all rtems"
ac_subdirs_all="$ac_subdirs_all sh"
ac_subdirs_all="$ac_subdirs_all sparc64"
@@ -4925,6 +4926,10 @@
subdirs="$subdirs netware"
;;
+ psp)
+
+subdirs="$subdirs psp"
+ ;;
rdos)
subdirs="$subdirs rdos"
diff -burN newlib-1.15.0/newlib/libc/sys/configure.in newlib-psp/newlib/libc/sys/configure.in
--- newlib-1.15.0/newlib/libc/sys/configure.in 2006-04-13 21:56:27.000000000 +0200
+++ newlib-psp/newlib/libc/sys/configure.in 2007-03-10 18:02:39.000000000 +0100
@@ -32,6 +32,7 @@
mmixware) AC_CONFIG_SUBDIRS(mmixware) ;;
netware) AC_CONFIG_SUBDIRS(netware) ;;
rdos) AC_CONFIG_SUBDIRS(rdos) ;;
+ psp) AC_CONFIG_SUBDIRS(psp) ;;
rtems) AC_CONFIG_SUBDIRS(rtems) ;;
sh) AC_CONFIG_SUBDIRS(sh) ;;
sparc64) AC_CONFIG_SUBDIRS(sparc64) ;;
diff -burN newlib-1.15.0/newlib/libc/sys/psp/Makefile.am newlib-psp/newlib/libc/sys/psp/Makefile.am
--- newlib-1.15.0/newlib/libc/sys/psp/Makefile.am 1970-01-01 01:00:00.000000000 +0100
+++ newlib-psp/newlib/libc/sys/psp/Makefile.am 2007-03-10 18:02:39.000000000 +0100
@@ -0,0 +1,72 @@
+## Process this file with automake to generate Makefile.in
+
+AUTOMAKE_OPTIONS = cygnus
+
+INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
+
+AM_CCASFLAGS = $(INCLUDES) $(CFLAGS)
+
+noinst_LIBRARIES = lib.a
+
+LIBCGLUE_MULT_OBJS = _close.o _exit.o _fork.o _fstat.o _getpid.o \
+ _gettimeofday.o _kill.o _lseek.o _open.o _read.o \
+ _sbrk.o _wait.o _write.o clock.o isatty.o time.o \
+ _link.o _unlink.o sleep.o opendir.o readdir.o \
+ closedir.o getcwd.o chdir.o mkdir.o rmdir.o \
+ realpath.o _stat.o truncate.o access.o tzset.o \
+ __psp_set_errno.o mlock.o _fcntl.o _rename.o nanosleep.o
+
+SOCKET_MULT_OBJS = socket.o accept.o bind.o connect.o getsockopt.o \
+ listen.o recv.o recvfrom.o send.o sendto.o \
+ setsockopt.o shutdown.o getsockname.o getpeername.o \
+ inet_ntoa.o
+
+PE_OBJS = pipe.o
+
+FDMAN_OBJS = fdman.o
+
+SELECT_OBJS = select.o
+
+INTERRUPT_OBJS = interrupt.o
+
+XPRINTF_MULT_OBJS = vxprintf.o _xprintf.o __sout.o vsnprintf.o snprintf.o \
+ vsprintf.o sprintf.o __mout.o mprintf.o vmprintf.o asprintf.o \
+ vasprintf.o __fout.o fprintf.o vfprintf.o printf.o vprintf.o \
+ _sprintf_r.o
+
+NETDB_MULT_OBJS = h_errno.o gethostbyaddr.o gethostbyname.o
+
+
+lib_a_SOURCES = libcglue.c socket.c pspcwd.c xprintf.c netdb.c pipe.c fdman.c select.c interrupt.S
+lib_a_LIBADD = $(LIBCGLUE_MULT_OBJS) $(SOCKET_MULT_OBJS) $(XPRINTF_MULT_OBJS) \
+ $(NETDB_MULT_OBJS) $(PIPE_OBJS) $(FDMAN_OBJS) $(SELECT_OBJS) $(INTERRUPT_OBJS)
+
+all: crt0.o
+
+$(LIBCGLUE_MULT_OBJS): libcglue.c
+ $(COMPILE) -DF_$* $< -c -o $@
+
+$(SOCKET_MULT_OBJS): socket.c
+ $(COMPILE) -DF_$* $< -c -o $@
+
+$(XPRINTF_MULT_OBJS): xprintf.c
+ $(COMPILE) -DF_$* $< -c -o $@
+
+$(NETDB_MULT_OBJS): netdb.c
+ $(COMPILE) -DF_$* $< -c -o $@
+
+$(PIPE_OBJS): pipe.c
+ $(COMPILE) -DF_$* $< -c -o $@
+
+$(FDMAN_OBJS): fdman.c
+ $(COMPILE) -DF_$* $< -c -o $@
+
+$(SELECT_OBJS): select.c
+ $(COMPILE) -DF_$* $< -c -o $@
+
+$(INTERRUPT_OBJS): interrupt.S
+ $(COMPILE) -DF_$* $< -c -o $@
+
+
+ACLOCAL_AMFLAGS = -I ../../..
+CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff -burN newlib-1.15.0/newlib/libc/sys/psp/Makefile.in newlib-psp/newlib/libc/sys/psp/Makefile.in
--- newlib-1.15.0/newlib/libc/sys/psp/Makefile.in 1970-01-01 01:00:00.000000000 +0100
+++ newlib-psp/newlib/libc/sys/psp/Makefile.in 2007-03-10 18:02:39.000000000 +0100
@@ -0,0 +1,468 @@
+# Makefile.in generated by automake 1.9.6 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = .
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+DIST_COMMON = $(srcdir)/../../../../config.guess \
+ $(srcdir)/../../../../config.sub $(srcdir)/Makefile.in \
+ $(srcdir)/Makefile.am $(top_srcdir)/configure \
+ $(am__configure_deps) $(srcdir)/../../../../mkinstalldirs \
+ $(srcdir)/../../../../compile $(srcdir)/../../../../compile \
+ $(srcdir)/../../../../compile $(srcdir)/../../../../compile
+subdir = .
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/../../../acinclude.m4 \
+ $(top_srcdir)/configure.in
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno configure.status.lineno
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
+CONFIG_CLEAN_FILES =
+LIBRARIES = $(noinst_LIBRARIES)
+ARFLAGS = cru
+lib_a_AR = $(AR) $(ARFLAGS)
+lib_a_LIBADD =
+#am_lib_a_OBJECTS =
+#lib_a_OBJECTS = $(am_lib_a_OBJECTS)
+DEFAULT_INCLUDES = -I. -I$(srcdir)
+depcomp =
+am__depfiles_maybe =
+CCASCOMPILE = $(CCAS) $(AM_CCASFLAGS) $(CCASFLAGS)
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+SOURCES = $(lib_a_SOURCES)
+ETAGS = etags
+CTAGS = ctags
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AR = @AR@
+AS = @AS@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCAS = @CCAS@
+CCASFLAGS = @CCASFLAGS@
+CCDEPMODE = @CCDEPMODE@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+ELIX_LEVEL_0_FALSE = @ELIX_LEVEL_0_FALSE@
+ELIX_LEVEL_0_TRUE = @ELIX_LEVEL_0_TRUE@
+ELIX_LEVEL_1_FALSE = @ELIX_LEVEL_1_FALSE@
+ELIX_LEVEL_1_TRUE = @ELIX_LEVEL_1_TRUE@
+ELIX_LEVEL_2_FALSE = @ELIX_LEVEL_2_FALSE@
+ELIX_LEVEL_2_TRUE = @ELIX_LEVEL_2_TRUE@
+ELIX_LEVEL_3_FALSE = @ELIX_LEVEL_3_FALSE@
+ELIX_LEVEL_3_TRUE = @ELIX_LEVEL_3_TRUE@
+ELIX_LEVEL_4_FALSE = @ELIX_LEVEL_4_FALSE@
+ELIX_LEVEL_4_TRUE = @ELIX_LEVEL_4_TRUE@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
+MAKEINFO = @MAKEINFO@
+MAY_SUPPLY_SYSCALLS_FALSE = @MAY_SUPPLY_SYSCALLS_FALSE@
+MAY_SUPPLY_SYSCALLS_TRUE = @MAY_SUPPLY_SYSCALLS_TRUE@
+NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+READELF = @READELF@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+USE_LIBTOOL_FALSE = @USE_LIBTOOL_FALSE@
+USE_LIBTOOL_TRUE = @USE_LIBTOOL_TRUE@
+VERSION = @VERSION@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_AS = @ac_ct_AS@
+ac_ct_RANLIB = @ac_ct_RANLIB@
+ac_ct_READELF = @ac_ct_READELF@
+ac_ct_STRIP = @ac_ct_STRIP@
+aext = @aext@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+libm_machine_dir = @libm_machine_dir@
+localstatedir = @localstatedir@
+lpfx = @lpfx@
+machine_dir = @machine_dir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+newlib_basedir = @newlib_basedir@
+oext = @oext@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sys_dir = @sys_dir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+AUTOMAKE_OPTIONS = cygnus
+INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
+AM_CCASFLAGS = $(INCLUDES) $(CFLAGS)
+noinst_LIBRARIES = lib.a
+
+LIBCGLUE_MULT_OBJS = _close.o _exit.o _fork.o _fstat.o _getpid.o \
+ _gettimeofday.o _kill.o _lseek.o _open.o _read.o \
+ _sbrk.o _wait.o _write.o clock.o isatty.o time.o \
+ _link.o _unlink.o sleep.o opendir.o readdir.o \
+ closedir.o getcwd.o chdir.o mkdir.o rmdir.o realpath.o \
+ _stat.o truncate.o access.o tzset.o __psp_set_errno.o mlock.o \
+ _fcntl.o _rename.o nanosleep.o
+
+
+SOCKET_MULT_OBJS = socket.o accept.o bind.o connect.o getsockopt.o \
+ listen.o recv.o recvfrom.o send.o sendto.o setsockopt.o \
+ shutdown.o getsockname.o getpeername.o inet_ntoa.o
+
+PIPE_OBJS = pipe.o
+
+FDMAN_OBJS = fdman.o
+
+SELECT_OBJS = select.o
+
+INTERRUPT_OBJS = interrupt.o
+
+XPRINTF_MULT_OBJS = vxprintf.o _xprintf.o __sout.o vsnprintf.o snprintf.o vsprintf.o sprintf.o __mout.o mprintf.o vmprintf.o asprintf.o vasprintf.o __fout.o fprintf.o vfprintf.o printf.o vprintf.o _sprintf_r.o
+
+NETDB_MULT_OBJS = h_errno.o gethostbyaddr.o gethostbyname.o
+
+lib_a_SOURCES = libcglue.c socket.c pspcwd.c xprintf.c netdb.c pipe.c fdman.c select.c interrupt.S
+lib_a_LIBADD = $(LIBCGLUE_MULT_OBJS) $(SOCKET_MULT_OBJS) $(XPRINTF_MULT_OBJS) $(NETDB_MULT_OBJS) $(PIPE_OBJS) $(FDMAN_OBJS) $(SELECT_OBJS) $(INTERRUPT_OBJS)
+lib_a_CCASFLAGS = $(AM_CCASFLAGS)
+lib_a_CFLAGS = $(AM_CFLAGS)
+ACLOCAL_AMFLAGS = -I ../../..
+CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
+
+
+lib_a_DEPENDENCIES = _close.o _exit.o _fork.o _fstat.o _getpid.o \
+_gettimeofday.o _kill.o _lseek.o _open.o _read.o _sbrk.o _wait.o \
+_write.o clock.o isatty.o time.o _link.o _unlink.o sleep.o opendir.o \
+readdir.o closedir.o getcwd.o chdir.o mkdir.o rmdir.o realpath.o \
+_stat.o truncate.o access.o tzset.o __psp_set_errno.o mlock.o _fcntl.o \
+socket.o accept.o bind.o connect.o getsockopt.o listen.o recv.o \
+recvfrom.o send.o sendto.o setsockopt.o shutdown.o getsockname.o \
+getpeername.o inet_ntoa.o vxprintf.o _xprintf.o __sout.o vsnprintf.o \
+snprintf.o vsprintf.o sprintf.o __mout.o mprintf.o vmprintf.o \
+asprintf.o vasprintf.o __fout.o fprintf.o vfprintf.o printf.o vprintf.o \
+_sprintf_r.o h_errno.o gethostbyaddr.o gethostbyname.o pipe.o fdman.o \
+select.o interrupt.o _rename.o nanosleep.o
+lib_a_OBJECTS = libcglue.o socket.o pspcwd.o xprintf.o netdb.o pipe.o \
+fdman.o select.o interrupt.o
+
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .S .c .o .obj
+am--refresh:
+ @:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ echo ' cd $(srcdir) && $(AUTOMAKE) --cygnus '; \
+ cd $(srcdir) && $(AUTOMAKE) --cygnus \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --cygnus Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ echo ' $(SHELL) ./config.status'; \
+ $(SHELL) ./config.status;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ $(SHELL) ./config.status --recheck
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ cd $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+
+clean-noinstLIBRARIES:
+ -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
+lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
+ -rm -f lib.a
+ $(lib_a_AR) lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
+ $(RANLIB) lib.a
+
+mostlyclean-compile:
+ -rm -f *.$(OBJEXT)
+
+distclean-compile:
+ -rm -f *.tab.c
+
+.S.o:
+ $(CCASCOMPILE) -c $<
+
+.S.obj:
+ $(CCASCOMPILE) -c `$(CYGPATH_W) '$<'`
+
+lib_a-trap.o: trap.S
+ $(CCAS) $(lib_a_CCASFLAGS) $(CCASFLAGS) -c -o lib_a-trap.o `test -f 'trap.S' || echo '$(srcdir)/'`trap.S
+
+lib_a-trap.obj: trap.S
+ $(CCAS) $(lib_a_CCASFLAGS) $(CCASFLAGS) -c -o lib_a-trap.obj `if test -f 'trap.S'; then $(CYGPATH_W) 'trap.S'; else $(CYGPATH_W) '$(srcdir)/trap.S'; fi`
+
+.c.o:
+ $(COMPILE) -c $<
+
+.c.obj:
+ $(COMPILE) -c `$(CYGPATH_W) '$<'`
+
+$(LIBCGLUE_MULT_OBJS): libcglue.c
+ $(COMPILE) -DF_$* $< -c -o $@
+
+$(SOCKET_MULT_OBJS): socket.c
+ $(COMPILE) -DF_$* $< -c -o $@
+
+$(XPRINTF_MULT_OBJS): xprintf.c
+ $(COMPILE) -DF_$* $< -c -o $@
+
+$(NETDB_MULT_OBJS): netdb.c
+ $(COMPILE) -DF_$* $< -c -o $@
+
+$(PIPE_OBJS): pipe.c
+ $(COMPILE) -DF_$* $< -c -o $@
+
+$(FDMAN_OBJS): fdman.c
+ $(COMPILE) -DF_$* $< -c -o $@
+
+$(SELECT_OBJS): select.c
+ $(COMPILE) -DF_$* $< -c -o $@
+
+$(INTERRUPT_OBJS): interrupt.S
+ $(COMPILE) -DF_$* $< -c -o $@
+
+uninstall-info-am:
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+check-am:
+check: check-am
+all-am: Makefile $(LIBRARIES)
+installdirs:
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-noinstLIBRARIES mostlyclean-am
+
+distclean: distclean-am
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+ -rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+ distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+ -rm -rf $(top_srcdir)/autom4te.cache
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am:
+
+.PHONY: CTAGS GTAGS all all-am am--refresh check check-am clean \
+ clean-generic clean-noinstLIBRARIES ctags distclean \
+ distclean-compile distclean-generic distclean-tags dvi dvi-am \
+ html html-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-compile \
+ mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \
+ uninstall-am uninstall-info-am
+
+
+all: crt0.o
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -burN newlib-1.15.0/newlib/libc/sys/psp/README newlib-psp/newlib/libc/sys/psp/README
--- newlib-1.15.0/newlib/libc/sys/psp/README 1970-01-01 01:00:00.000000000 +0100
+++ newlib-psp/newlib/libc/sys/psp/README 2007-03-10 18:02:39.000000000 +0100
@@ -0,0 +1,16 @@
+Newlib for PSP
+--
+
+This sys/psp directory depends on PSPSDK headers. It expects them to live in
+${prefix}/psp/sdk/include (see newlib/configure.host).
+
+I used automake 1.4-p6 to generate aclocal.m4 and Makefile.in:
+
+ aclocal -I ../../..
+ automake --cygnus
+
+Autoconf refused to work for me, so I copied configure from sys/sh and modified
+$ac_unique_file to point libcglue.c.
+
+--
+Marcus R. Brown <mrbrown@ocgnet.org>
diff -burN newlib-1.15.0/newlib/libc/sys/psp/aclocal.m4 newlib-psp/newlib/libc/sys/psp/aclocal.m4
--- newlib-1.15.0/newlib/libc/sys/psp/aclocal.m4 1970-01-01 01:00:00.000000000 +0100
+++ newlib-psp/newlib/libc/sys/psp/aclocal.m4 2007-03-10 18:02:39.000000000 +0100
@@ -0,0 +1,880 @@
+# generated automatically by aclocal 1.9.6 -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005 Free Software Foundation, Inc.
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+# Copyright (C) 2002, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"])
+
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION so it can be traced.
+# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+ [AM_AUTOMAKE_VERSION([1.9.6])])
+
+# AM_AUX_DIR_EXPAND -*- Autoconf -*-
+
+# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
+# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory. The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run. This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+# fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+# fails if $ac_aux_dir is absolute,
+# fails when called from a subdirectory in a VPATH build with
+# a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir. In an in-source build this is usually
+# harmless because $srcdir is `.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
+# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+# MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH. The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+AC_DEFUN([AM_AUX_DIR_EXPAND],
+[dnl Rely on autoconf to set up CDPATH properly.
+AC_PREREQ([2.50])dnl
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+])
+
+# AM_CONDITIONAL -*- Autoconf -*-
+
+# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 7
+
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+AC_DEFUN([AM_CONDITIONAL],
+[AC_PREREQ(2.52)dnl
+ ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
+ [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_SUBST([$1_TRUE])
+AC_SUBST([$1_FALSE])
+if $2; then
+ $1_TRUE=
+ $1_FALSE='#'
+else
+ $1_TRUE='#'
+ $1_FALSE=
+fi
+AC_CONFIG_COMMANDS_PRE(
+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
+ AC_MSG_ERROR([[conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.]])
+fi])])
+
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 8
+
+# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery. Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+# _AM_DEPENDENCIES(NAME)
+# ----------------------
+# See how the compiler implements dependency checking.
+# NAME is "CC", "CXX", "GCJ", or "OBJC".
+# We try a few techniques and use that to set a single cache variable.
+#
+# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
+# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
+# dependency, and given that the user is not expected to run this macro,
+# just rely on AC_PROG_CC.
+AC_DEFUN([_AM_DEPENDENCIES],
+[AC_REQUIRE([AM_SET_DEPDIR])dnl
+AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
+AC_REQUIRE([AM_MAKE_INCLUDE])dnl
+AC_REQUIRE([AM_DEP_TRACK])dnl
+
+ifelse([$1], CC, [depcc="$CC" am_compiler_list=],
+ [$1], CXX, [depcc="$CXX" am_compiler_list=],
+ [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+ [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
+ [depcc="$$1" am_compiler_list=])
+
+AC_CACHE_CHECK([dependency style of $depcc],
+ [am_cv_$1_dependencies_compiler_type],
+[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named `D' -- because `-MD' means `put the output
+ # in D'.
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+ # We will build objects and dependencies in a subdirectory because
+ # it helps to detect inapplicable dependency modes. For instance
+ # both Tru64's cc and ICC support -MD to output dependencies as a
+ # side effect of compilation, but ICC will put the dependencies in
+ # the current directory while Tru64 will put them in the object
+ # directory.
+ mkdir sub
+
+ am_cv_$1_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
+ fi
+ for depmode in $am_compiler_list; do
+ # Setup a source with many dependencies, because some compilers
+ # like to wrap large dependency lists on column 80 (with \), and
+ # we should not choose a depcomp mode which is confused by this.
+ #
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ : > sub/conftest.c
+ for i in 1 2 3 4 5 6; do
+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
+ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+ # Solaris 8's {/usr,}/bin/sh.
+ touch sub/conftst$i.h
+ done
+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+ case $depmode in
+ nosideeffect)
+ # after this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ none) break ;;
+ esac
+ # We check with `-c' and `-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle `-M -o', and we need to detect this.
+ if depmode=$depmode \
+ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # or remarks (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored or not supported.
+ # When given -MP, icc 7.0 and 7.1 complain thusly:
+ # icc: Command line warning: ignoring option '-M'; no argument required
+ # The diagnosis changed in icc 8.0:
+ # icc: Command line remark: option '-MP' not supported
+ if (grep 'ignoring option' conftest.err ||
+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+ am_cv_$1_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
+ done
+
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_$1_dependencies_compiler_type=none
+fi
+])
+AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
+AM_CONDITIONAL([am__fastdep$1], [
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
+])
+
+
+# AM_SET_DEPDIR
+# -------------
+# Choose a directory name for dependency files.
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES
+AC_DEFUN([AM_SET_DEPDIR],
+[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
+])
+
+
+# AM_DEP_TRACK
+# ------------
+AC_DEFUN([AM_DEP_TRACK],
+[AC_ARG_ENABLE(dependency-tracking,
+[ --disable-dependency-tracking speeds up one-time build
+ --enable-dependency-tracking do not reject slow dependency extractors])
+if test "x$enable_dependency_tracking" != xno; then
+ am_depcomp="$ac_aux_dir/depcomp"
+ AMDEPBACKSLASH='\'
+fi
+AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
+AC_SUBST([AMDEPBACKSLASH])
+])
+
+# Generate code to set up dependency tracking. -*- Autoconf -*-
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+#serial 3
+
+# _AM_OUTPUT_DEPENDENCY_COMMANDS
+# ------------------------------
+AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
+[for mf in $CONFIG_FILES; do
+ # Strip MF so we end up with the name of the file.
+ mf=`echo "$mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile or not.
+ # We used to match only the files named `Makefile.in', but
+ # some people rename them; so instead we look at the file content.
+ # Grep'ing the first line is not enough: some people post-process
+ # each Makefile.in and add a new line on top of each file to say so.
+ # So let's grep whole file.
+ if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
+ dirpart=`AS_DIRNAME("$mf")`
+ else
+ continue
+ fi
+ # Extract the definition of DEPDIR, am__include, and am__quote
+ # from the Makefile without running `make'.
+ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+ test -z "$DEPDIR" && continue
+ am__include=`sed -n 's/^am__include = //p' < "$mf"`
+ test -z "am__include" && continue
+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+ # When using ansi2knr, U may be empty or an underscore; expand it
+ U=`sed -n 's/^U = //p' < "$mf"`
+ # Find all dependency output files, they are included files with
+ # $(DEPDIR) in their names. We invoke sed twice because it is the
+ # simplest approach to changing $(DEPDIR) to its actual value in the
+ # expansion.
+ for file in `sed -n "
+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+ # Make sure the directory exists.
+ test -f "$dirpart/$file" && continue
+ fdir=`AS_DIRNAME(["$file"])`
+ AS_MKDIR_P([$dirpart/$fdir])
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
+ done
+done
+])# _AM_OUTPUT_DEPENDENCY_COMMANDS
+
+
+# AM_OUTPUT_DEPENDENCY_COMMANDS
+# -----------------------------
+# This macro should only be invoked once -- use via AC_REQUIRE.
+#
+# This code is only required when automatic dependency tracking
+# is enabled. FIXME. This creates each `.P' file that we will
+# need in order to bootstrap the dependency handling code.
+AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
+[AC_CONFIG_COMMANDS([depfiles],
+ [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
+ [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
+])
+
+# Do all the work for Automake. -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 12
+
+# This macro actually does too much. Some checks are only needed if
+# your package does certain things. But this isn't really a big deal.
+
+# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+# AM_INIT_AUTOMAKE([OPTIONS])
+# -----------------------------------------------
+# The call with PACKAGE and VERSION arguments is the old style
+# call (pre autoconf-2.50), which is being phased out. PACKAGE
+# and VERSION should now be passed to AC_INIT and removed from
+# the call to AM_INIT_AUTOMAKE.
+# We support both call styles for the transition. After
+# the next Automake release, Autoconf can make the AC_INIT
+# arguments mandatory, and then we can depend on a new Autoconf
+# release and drop the old call support.
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_PREREQ([2.58])dnl
+dnl Autoconf wants to disallow AM_ names. We explicitly allow
+dnl the ones we care about.
+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+AC_REQUIRE([AC_PROG_INSTALL])dnl
+# test to see if srcdir already configured
+if test "`cd $srcdir && pwd`" != "`pwd`" &&
+ test -f $srcdir/config.status; then
+ AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+ if (cygpath --version) >/dev/null 2>/dev/null; then
+ CYGPATH_W='cygpath -w'
+ else
+ CYGPATH_W=echo
+ fi
+fi
+AC_SUBST([CYGPATH_W])
+
+# Define the identity of the package.
+dnl Distinguish between old-style and new-style calls.
+m4_ifval([$2],
+[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+ AC_SUBST([PACKAGE], [$1])dnl
+ AC_SUBST([VERSION], [$2])],
+[_AM_SET_OPTIONS([$1])dnl
+ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
+ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
+
+_AM_IF_OPTION([no-define],,
+[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
+
+# Some tools Automake needs.
+AC_REQUIRE([AM_SANITY_CHECK])dnl
+AC_REQUIRE([AC_ARG_PROGRAM])dnl
+AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
+AM_MISSING_PROG(AUTOCONF, autoconf)
+AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
+AM_MISSING_PROG(AUTOHEADER, autoheader)
+AM_MISSING_PROG(MAKEINFO, makeinfo)
+AM_PROG_INSTALL_SH
+AM_PROG_INSTALL_STRIP
+AC_REQUIRE([AM_PROG_MKDIR_P])dnl
+# We need awk for the "check" target. The system "awk" is bad on
+# some platforms.
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
+ [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+ [_AM_PROG_TAR([v7])])])
+_AM_IF_OPTION([no-dependencies],,
+[AC_PROVIDE_IFELSE([AC_PROG_CC],
+ [_AM_DEPENDENCIES(CC)],
+ [define([AC_PROG_CC],
+ defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_CXX],
+ [_AM_DEPENDENCIES(CXX)],
+ [define([AC_PROG_CXX],
+ defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+])
+])
+
+
+# When config.status generates a header, we must update the stamp-h file.
+# This file resides in the same directory as the config header
+# that is generated. The stamp files are numbered to have different names.
+
+# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
+# loop where config.status creates the headers, so we can generate
+# our stamp files there.
+AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
+[# Compute $1's index in $config_headers.
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+ case $_am_header in
+ $1 | $1:* )
+ break ;;
+ * )
+ _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+ esac
+done
+echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
+
+# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+install_sh=${install_sh-"$am_aux_dir/install-sh"}
+AC_SUBST(install_sh)])
+
+# Copyright (C) 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# Check whether the underlying file-system supports filenames
+# with a leading dot. For instance MS-DOS doesn't.
+AC_DEFUN([AM_SET_LEADING_DOT],
+[rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+ am__leading_dot=.
+else
+ am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+AC_SUBST([am__leading_dot])])
+
+# Add --enable-maintainer-mode option to configure. -*- Autoconf -*-
+# From Jim Meyering
+
+# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+AC_DEFUN([AM_MAINTAINER_MODE],
+[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
+ dnl maintainer-mode is disabled by default
+ AC_ARG_ENABLE(maintainer-mode,
+[ --enable-maintainer-mode enable make rules and dependencies not useful
+ (and sometimes confusing) to the casual installer],
+ USE_MAINTAINER_MODE=$enableval,
+ USE_MAINTAINER_MODE=no)
+ AC_MSG_RESULT([$USE_MAINTAINER_MODE])
+ AM_CONDITIONAL(MAINTAINER_MODE, [test $USE_MAINTAINER_MODE = yes])
+ MAINT=$MAINTAINER_MODE_TRUE
+ AC_SUBST(MAINT)dnl
+]
+)
+
+AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE])
+
+# Check to see how 'make' treats includes. -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 3
+
+# AM_MAKE_INCLUDE()
+# -----------------
+# Check to see how make treats includes.
+AC_DEFUN([AM_MAKE_INCLUDE],
+[am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+ @echo done
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+AC_MSG_CHECKING([for style of include used by $am_make])
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# We grep out `Entering directory' and `Leaving directory'
+# messages which can occur if `w' ends up in MAKEFLAGS.
+# In particular we don't look at `^make:' because GNU make might
+# be invoked under some other name (usually "gmake"), in which
+# case it prints its new name instead of `make'.
+if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
+ am__include=include
+ am__quote=
+ _am_result=GNU
+fi
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+ echo '.include "confinc"' > confmf
+ if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
+ am__include=.include
+ am__quote="\""
+ _am_result=BSD
+ fi
+fi
+AC_SUBST([am__include])
+AC_SUBST([am__quote])
+AC_MSG_RESULT([$_am_result])
+rm -f confinc confmf
+])
+
+# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
+
+# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
+
+
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it supports --run.
+# If it does, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+ am_missing_run="$MISSING --run "
+else
+ am_missing_run=
+ AC_MSG_WARN([`missing' script is too old or missing])
+fi
+])
+
+# Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_MKDIR_P
+# ---------------
+# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise.
+#
+# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories
+# created by `make install' are always world readable, even if the
+# installer happens to have an overly restrictive umask (e.g. 077).
+# This was a mistake. There are at least two reasons why we must not
+# use `-m 0755':
+# - it causes special bits like SGID to be ignored,
+# - it may be too restrictive (some setups expect 775 directories).
+#
+# Do not use -m 0755 and let people choose whatever they expect by
+# setting umask.
+#
+# We cannot accept any implementation of `mkdir' that recognizes `-p'.
+# Some implementations (such as Solaris 8's) are not thread-safe: if a
+# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c'
+# concurrently, both version can detect that a/ is missing, but only
+# one can create it and the other will error out. Consequently we
+# restrict ourselves to GNU make (using the --version option ensures
+# this.)
+AC_DEFUN([AM_PROG_MKDIR_P],
+[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
+ # We used to keeping the `.' as first argument, in order to
+ # allow $(mkdir_p) to be used without argument. As in
+ # $(mkdir_p) $(somedir)
+ # where $(somedir) is conditionally defined. However this is wrong
+ # for two reasons:
+ # 1. if the package is installed by a user who cannot write `.'
+ # make install will fail,
+ # 2. the above comment should most certainly read
+ # $(mkdir_p) $(DESTDIR)$(somedir)
+ # so it does not work when $(somedir) is undefined and
+ # $(DESTDIR) is not.
+ # To support the latter case, we have to write
+ # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir),
+ # so the `.' trick is pointless.
+ mkdir_p='mkdir -p --'
+else
+ # On NextStep and OpenStep, the `mkdir' command does not
+ # recognize any option. It will interpret all options as
+ # directories to create, and then abort because `.' already
+ # exists.
+ for d in ./-p ./--version;
+ do
+ test -d $d && rmdir $d
+ done
+ # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
+ if test -f "$ac_aux_dir/mkinstalldirs"; then
+ mkdir_p='$(mkinstalldirs)'
+ else
+ mkdir_p='$(install_sh) -d'
+ fi
+fi
+AC_SUBST([mkdir_p])])
+
+# Helper functions for option handling. -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 3
+
+# _AM_MANGLE_OPTION(NAME)
+# -----------------------
+AC_DEFUN([_AM_MANGLE_OPTION],
+[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
+
+# _AM_SET_OPTION(NAME)
+# ------------------------------
+# Set option NAME. Presently that only means defining a flag for this option.
+AC_DEFUN([_AM_SET_OPTION],
+[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
+
+# _AM_SET_OPTIONS(OPTIONS)
+# ----------------------------------
+# OPTIONS is a space-separated list of Automake options.
+AC_DEFUN([_AM_SET_OPTIONS],
+[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+
+# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
+# -------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+AC_DEFUN([_AM_IF_OPTION],
+[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+# Check to make sure that the build environment is sane. -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+# AM_SANITY_CHECK
+# ---------------
+AC_DEFUN([AM_SANITY_CHECK],
+[AC_MSG_CHECKING([whether build environment is sane])
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+ if test "$[*]" = "X"; then
+ # -L didn't work.
+ set X `ls -t $srcdir/configure conftest.file`
+ fi
+ rm -f conftest.file
+ if test "$[*]" != "X $srcdir/configure conftest.file" \
+ && test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
+alias in your environment])
+ fi
+
+ test "$[2]" = conftest.file
+ )
+then
+ # Ok.
+ :
+else
+ AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+AC_MSG_RESULT(yes)])
+
+# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_STRIP
+# ---------------------
+# One issue with vendor `install' (even GNU) is that you can't
+# specify the program used to strip binaries. This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in `make install-strip', and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'. However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
+if test "$cross_compiling" != no; then
+ AC_CHECK_TOOL([STRIP], [strip], :)
+fi
+INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+# Check how to create a tarball. -*- Autoconf -*-
+
+# Copyright (C) 2004, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# _AM_PROG_TAR(FORMAT)
+# --------------------
+# Check how to create a tarball in format FORMAT.
+# FORMAT should be one of `v7', `ustar', or `pax'.
+#
+# Substitute a variable $(am__tar) that is a command
+# writing to stdout a FORMAT-tarball containing the directory
+# $tardir.
+# tardir=directory && $(am__tar) > result.tar
+#
+# Substitute a variable $(am__untar) that extract such
+# a tarball read from stdin.
+# $(am__untar) < result.tar
+AC_DEFUN([_AM_PROG_TAR],
+[# Always define AMTAR for backward compatibility.
+AM_MISSING_PROG([AMTAR], [tar])
+m4_if([$1], [v7],
+ [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
+ [m4_case([$1], [ustar],, [pax],,
+ [m4_fatal([Unknown tar format])])
+AC_MSG_CHECKING([how to create a $1 tar archive])
+# Loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
+_am_tools=${am_cv_prog_tar_$1-$_am_tools}
+# Do not fold the above two line into one, because Tru64 sh and
+# Solaris sh will not grok spaces in the rhs of `-'.
+for _am_tool in $_am_tools
+do
+ case $_am_tool in
+ gnutar)
+ for _am_tar in tar gnutar gtar;
+ do
+ AM_RUN_LOG([$_am_tar --version]) && break
+ done
+ am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+ am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+ am__untar="$_am_tar -xf -"
+ ;;
+ plaintar)
+ # Must skip GNU tar: if it does not support --format= it doesn't create
+ # ustar tarball either.
+ (tar --version) >/dev/null 2>&1 && continue
+ am__tar='tar chf - "$$tardir"'
+ am__tar_='tar chf - "$tardir"'
+ am__untar='tar xf -'
+ ;;
+ pax)
+ am__tar='pax -L -x $1 -w "$$tardir"'
+ am__tar_='pax -L -x $1 -w "$tardir"'
+ am__untar='pax -r'
+ ;;
+ cpio)
+ am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+ am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+ am__untar='cpio -i -H $1 -d'
+ ;;
+ none)
+ am__tar=false
+ am__tar_=false
+ am__untar=false
+ ;;
+ esac
+
+ # If the value was cached, stop now. We just wanted to have am__tar
+ # and am__untar set.
+ test -n "${am_cv_prog_tar_$1}" && break
+
+ # tar/untar a dummy directory, and stop if the command works
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ echo GrepMe > conftest.dir/file
+ AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+ rm -rf conftest.dir
+ if test -s conftest.tar; then
+ AM_RUN_LOG([$am__untar <conftest.tar])
+ grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+ fi
+done
+rm -rf conftest.dir
+
+AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+AC_SUBST([am__tar])
+AC_SUBST([am__untar])
+]) # _AM_PROG_TAR
+
+m4_include([../../../acinclude.m4])
diff -burN newlib-1.15.0/newlib/libc/sys/psp/arpa/inet.h newlib-psp/newlib/libc/sys/psp/arpa/inet.h
--- newlib-1.15.0/newlib/libc/sys/psp/arpa/inet.h 1970-01-01 01:00:00.000000000 +0100
+++ newlib-psp/newlib/libc/sys/psp/arpa/inet.h 2007-03-10 18:02:39.000000000 +0100
@@ -0,0 +1,26 @@
+/* arpa/inet.h - Functions for converting IP addresses between strings and numbers */
+
+#ifndef _ARPA_INET_H_
+#define _ARPA_INET_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <netinet/in.h>
+
+in_addr_t sceNetInetInetAddr(const char *ip);
+int sceNetInetInetAton(const char *ip, struct in_addr *in);
+const char* sceNetInetInetNtop(int af, const void *src, char *dst, socklen_t cnt);
+int sceNetInetInetPton(int af, const char *src, void *dst);
+
+char *inet_ntoa(struct in_addr in);
+#define inet_addr sceNetInetInetAddr
+#define inet_aton sceNetInetInetAton
+#define inet_ntop sceNetInetInetNtop
+#define inet_pton sceNetInetInetPton
+
+#ifdef __cplusplus
+}
+#endif
+#endif /* _ARPA_INET_H_ */
diff -burN newlib-1.15.0/newlib/libc/sys/psp/confdefs.h newlib-psp/newlib/libc/sys/psp/confdefs.h
--- newlib-1.15.0/newlib/libc/sys/psp/confdefs.h 1970-01-01 01:00:00.000000000 +0100
+++ newlib-psp/newlib/libc/sys/psp/confdefs.h 2007-03-10 18:02:39.000000000 +0100
@@ -0,0 +1 @@
+
diff -burN newlib-1.15.0/newlib/libc/sys/psp/configure newlib-psp/newlib/libc/sys/psp/configure
--- newlib-1.15.0/newlib/libc/sys/psp/configure 1970-01-01 01:00:00.000000000 +0100
+++ newlib-psp/newlib/libc/sys/psp/configure 2007-03-10 18:02:39.000000000 +0100
@@ -0,0 +1,4085 @@
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.59 for newlib 1.15.0.
+#
+# Copyright (C) 2003 Free Software Foundation, Inc.
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## --------------------- ##
+## M4sh Initialization. ##
+## --------------------- ##
+
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
+ set -o posix
+fi
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# Support unset when possible.
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+ as_unset=unset
+else
+ as_unset=false
+fi
+
+
+# Work around bugs in pre-3.0 UWIN ksh.
+$as_unset ENV MAIL MAILPATH
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+for as_var in \
+ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
+ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
+ LC_TELEPHONE LC_TIME
+do
+ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
+ eval $as_var=C; export $as_var
+ else
+ $as_unset $as_var
+ fi
+done
+
+# Required to use basename.
+if expr a : '\(a\)' >/dev/null 2>&1; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+
+# Name of the executable.
+as_me=`$as_basename "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)$' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
+ /^X\/\(\/\/\)$/{ s//\1/; q; }
+ /^X\/\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+
+
+# PATH needs CR, and LINENO needs CR and PATH.
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+
+
+ as_lineno_1=$LINENO
+ as_lineno_2=$LINENO
+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x$as_lineno_3" = "x$as_lineno_2" || {
+ # Find who we are. Look in the path if we contain no path at all
+ # relative or not.
+ case $0 in
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+
+ ;;
+ esac
+ # We did not find ourselves, most probably we were run as `sh COMMAND'
+ # in which case we are not to be found in the path.
+ if test "x$as_myself" = x; then
+ as_myself=$0
+ fi
+ if test ! -f "$as_myself"; then
+ { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2
+ { (exit 1); exit 1; }; }
+ fi
+ case $CONFIG_SHELL in
+ '')
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for as_base in sh bash ksh sh5; do
+ case $as_dir in
+ /*)
+ if ("$as_dir/$as_base" -c '
+ as_lineno_1=$LINENO
+ as_lineno_2=$LINENO
+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
+ $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
+ $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
+ CONFIG_SHELL=$as_dir/$as_base
+ export CONFIG_SHELL
+ exec "$CONFIG_SHELL" "$0" ${1+"$@"}
+ fi;;
+ esac
+ done
+done
+;;
+ esac
+
+ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
+ # uniformly replaced by the line number. The first 'sed' inserts a
+ # line-number line before each line; the second 'sed' does the real
+ # work. The second script uses 'N' to pair each line-number line
+ # with the numbered line, and appends trailing '-' during
+ # substitution so that $LINENO is not a special case at line end.
+ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
+ # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
+ sed '=' <$as_myself |
+ sed '
+ N
+ s,$,-,
+ : loop
+ s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
+ t loop
+ s,-$,,
+ s,^['$as_cr_digits']*\n,,
+ ' >$as_me.lineno &&
+ chmod +x $as_me.lineno ||
+ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
+ { (exit 1); exit 1; }; }
+
+ # Don't try to exec as it changes $[0], causing all sort of problems
+ # (the dirname of $[0] is not the place where we might find the
+ # original and so on. Autoconf is especially sensible to this).
+ . ./$as_me.lineno
+ # Exit status is that of the last command.
+ exit
+}
+
+
+case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
+ *c*,-n*) ECHO_N= ECHO_C='
+' ECHO_T=' ' ;;
+ *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
+ *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
+esac
+
+if expr a : '\(a\)' >/dev/null 2>&1; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+rm -f conf$$ conf$$.exe conf$$.file
+echo >conf$$.file
+if ln -s conf$$.file conf$$ 2>/dev/null; then
+ # We could just check for DJGPP; but this test a) works b) is more generic
+ # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
+ if test -f conf$$.exe; then
+ # Don't use ln at all; we don't have any links
+ as_ln_s='cp -p'
+ else
+ as_ln_s='ln -s'
+ fi
+elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+else
+ as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.file
+
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p=:
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+fi
+
+as_executable_p="test -f"
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.
+as_nl='
+'
+IFS=" $as_nl"
+
+# CDPATH.
+$as_unset CDPATH
+
+
+# Name of the host.
+# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+exec 6>&1
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_config_libobj_dir=.
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+# Maximum number of lines to put in a shell here document.
+# This variable seems obsolete. It should probably be removed, and
+# only ac_max_sed_lines should be used.
+: ${ac_max_here_lines=38}
+
+# Identity of this package.
+PACKAGE_NAME='newlib'
+PACKAGE_TARNAME='newlib'
+PACKAGE_VERSION='1.15.0'
+PACKAGE_STRING='newlib 1.15.0'
+PACKAGE_BUGREPORT=''
+
+ac_unique_file="libcglue.c"
+ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS MAY_SUPPLY_SYSCALLS_TRUE MAY_SUPPLY_SYSCALLS_FALSE newlib_basedir build build_cpu build_vendor build_os host host_cpu host_vendor host_os INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar CC DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE AS ac_ct_AS AR ac_ct_AR RANLIB ac_ct_RANLIB READELF ac_ct_READELF MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT CCAS CCASFLAGS NEWLIB_CFLAGS LDFLAGS ELIX_LEVEL_0_TRUE ELIX_LEVEL_0_FALSE ELIX_LEVEL_1_TRUE ELIX_LEVEL_1_FALSE ELIX_LEVEL_2_TRUE ELIX_LEVEL_2_FALSE ELIX_LEVEL_3_TRUE ELIX_LEVEL_3_FALSE ELIX_LEVEL_4_TRUE ELIX_LEVEL_4_FALSE USE_LIBTOOL_TRUE USE_LIBTOOL_FALSE OBJEXT oext aext lpfx libm_machine_dir machine_dir sys_dir LIBOBJS LTLIBOBJS'
+ac_subst_files=''
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datadir='${prefix}/share'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+libdir='${exec_prefix}/lib'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+infodir='${prefix}/info'
+mandir='${prefix}/man'
+
+ac_prev=
+for ac_option
+do
+ # If the previous option needs an argument, assign it.
+ if test -n "$ac_prev"; then
+ eval "$ac_prev=\$ac_option"
+ ac_prev=
+ continue
+ fi
+
+ ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'`
+
+ # Accept the important Cygnus configure options, so we can diagnose typos.
+
+ case $ac_option in
+
+ -bindir | --bindir | --bindi | --bind | --bin | --bi)
+ ac_prev=bindir ;;
+ -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+ bindir=$ac_optarg ;;
+
+ -build | --build | --buil | --bui | --bu)
+ ac_prev=build_alias ;;
+ -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+ build_alias=$ac_optarg ;;
+
+ -cache-file | --cache-file | --cache-fil | --cache-fi \
+ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+ ac_prev=cache_file ;;
+ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+ cache_file=$ac_optarg ;;
+
+ --config-cache | -C)
+ cache_file=config.cache ;;
+
+ -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
+ ac_prev=datadir ;;
+ -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
+ | --da=*)
+ datadir=$ac_optarg ;;
+
+ -disable-* | --disable-*)
+ ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+ { (exit 1); exit 1; }; }
+ ac_feature=`echo $ac_feature | sed 's/-/_/g'`
+ eval "enable_$ac_feature=no" ;;
+
+ -enable-* | --enable-*)
+ ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+ { (exit 1); exit 1; }; }
+ ac_feature=`echo $ac_feature | sed 's/-/_/g'`
+ case $ac_option in
+ *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
+ *) ac_optarg=yes ;;
+ esac
+ eval "enable_$ac_feature='$ac_optarg'" ;;
+
+ -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+ | --exec | --exe | --ex)
+ ac_prev=exec_prefix ;;
+ -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+ | --exec=* | --exe=* | --ex=*)
+ exec_prefix=$ac_optarg ;;
+
+ -gas | --gas | --ga | --g)
+ # Obsolete; use --with-gas.
+ with_gas=yes ;;
+
+ -help | --help | --hel | --he | -h)
+ ac_init_help=long ;;
+ -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+ ac_init_help=recursive ;;
+ -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+ ac_init_help=short ;;
+
+ -host | --host | --hos | --ho)
+ ac_prev=host_alias ;;
+ -host=* | --host=* | --hos=* | --ho=*)
+ host_alias=$ac_optarg ;;
+
+ -includedir | --includedir | --includedi | --included | --include \
+ | --includ | --inclu | --incl | --inc)
+ ac_prev=includedir ;;
+ -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+ | --includ=* | --inclu=* | --incl=* | --inc=*)
+ includedir=$ac_optarg ;;
+
+ -infodir | --infodir | --infodi | --infod | --info | --inf)
+ ac_prev=infodir ;;
+ -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+ infodir=$ac_optarg ;;
+
+ -libdir | --libdir | --libdi | --libd)
+ ac_prev=libdir ;;
+ -libdir=* | --libdir=* | --libdi=* | --libd=*)
+ libdir=$ac_optarg ;;
+
+ -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+ | --libexe | --libex | --libe)
+ ac_prev=libexecdir ;;
+ -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+ | --libexe=* | --libex=* | --libe=*)
+ libexecdir=$ac_optarg ;;
+
+ -localstatedir | --localstatedir | --localstatedi | --localstated \
+ | --localstate | --localstat | --localsta | --localst \
+ | --locals | --local | --loca | --loc | --lo)
+ ac_prev=localstatedir ;;
+ -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+ | --localstate=* | --localstat=* | --localsta=* | --localst=* \
+ | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
+ localstatedir=$ac_optarg ;;
+
+ -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+ ac_prev=mandir ;;
+ -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+ mandir=$ac_optarg ;;
+
+ -nfp | --nfp | --nf)
+ # Obsolete; use --without-fp.
+ with_fp=no ;;
+
+ -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+ | --no-cr | --no-c | -n)
+ no_create=yes ;;
+
+ -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+ no_recursion=yes ;;
+
+ -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+ | --oldin | --oldi | --old | --ol | --o)
+ ac_prev=oldincludedir ;;
+ -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+ oldincludedir=$ac_optarg ;;
+
+ -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+ ac_prev=prefix ;;
+ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+ prefix=$ac_optarg ;;
+
+ -program-prefix | --program-prefix | --program-prefi | --program-pref \
+ | --program-pre | --program-pr | --program-p)
+ ac_prev=program_prefix ;;
+ -program-prefix=* | --program-prefix=* | --program-prefi=* \
+ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+ program_prefix=$ac_optarg ;;
+
+ -program-suffix | --program-suffix | --program-suffi | --program-suff \
+ | --program-suf | --program-su | --program-s)
+ ac_prev=program_suffix ;;
+ -program-suffix=* | --program-suffix=* | --program-suffi=* \
+ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+ program_suffix=$ac_optarg ;;
+
+ -program-transform-name | --program-transform-name \
+ | --program-transform-nam | --program-transform-na \
+ | --program-transform-n | --program-transform- \
+ | --program-transform | --program-transfor \
+ | --program-transfo | --program-transf \
+ | --program-trans | --program-tran \
+ | --progr-tra | --program-tr | --program-t)
+ ac_prev=program_transform_name ;;
+ -program-transform-name=* | --program-transform-name=* \
+ | --program-transform-nam=* | --program-transform-na=* \
+ | --program-transform-n=* | --program-transform-=* \
+ | --program-transform=* | --program-transfor=* \
+ | --program-transfo=* | --program-transf=* \
+ | --program-trans=* | --program-tran=* \
+ | --progr-tra=* | --program-tr=* | --program-t=*)
+ program_transform_name=$ac_optarg ;;
+
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ silent=yes ;;
+
+ -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+ ac_prev=sbindir ;;
+ -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+ | --sbi=* | --sb=*)
+ sbindir=$ac_optarg ;;
+
+ -sharedstatedir | --sharedstatedir | --sharedstatedi \
+ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+ | --sharedst | --shareds | --shared | --share | --shar \
+ | --sha | --sh)
+ ac_prev=sharedstatedir ;;
+ -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+ | --sha=* | --sh=*)
+ sharedstatedir=$ac_optarg ;;
+
+ -site | --site | --sit)
+ ac_prev=site ;;
+ -site=* | --site=* | --sit=*)
+ site=$ac_optarg ;;
+
+ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+ ac_prev=srcdir ;;
+ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+ srcdir=$ac_optarg ;;
+
+ -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+ | --syscon | --sysco | --sysc | --sys | --sy)
+ ac_prev=sysconfdir ;;
+ -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+ sysconfdir=$ac_optarg ;;
+
+ -target | --target | --targe | --targ | --tar | --ta | --t)
+ ac_prev=target_alias ;;
+ -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+ target_alias=$ac_optarg ;;
+
+ -v | -verbose | --verbose | --verbos | --verbo | --verb)
+ verbose=yes ;;
+
+ -version | --version | --versio | --versi | --vers | -V)
+ ac_init_version=: ;;
+
+ -with-* | --with-*)
+ ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid package name: $ac_package" >&2
+ { (exit 1); exit 1; }; }
+ ac_package=`echo $ac_package| sed 's/-/_/g'`
+ case $ac_option in
+ *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
+ *) ac_optarg=yes ;;
+ esac
+ eval "with_$ac_package='$ac_optarg'" ;;
+
+ -without-* | --without-*)
+ ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid package name: $ac_package" >&2
+ { (exit 1); exit 1; }; }
+ ac_package=`echo $ac_package | sed 's/-/_/g'`
+ eval "with_$ac_package=no" ;;
+
+ --x)
+ # Obsolete; use --with-x.
+ with_x=yes ;;
+
+ -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+ | --x-incl | --x-inc | --x-in | --x-i)
+ ac_prev=x_includes ;;
+ -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+ x_includes=$ac_optarg ;;
+
+ -x-libraries | --x-libraries | --x-librarie | --x-librari \
+ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+ ac_prev=x_libraries ;;
+ -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+ x_libraries=$ac_optarg ;;
+
+ -*) { echo "$as_me: error: unrecognized option: $ac_option
+Try \`$0 --help' for more information." >&2
+ { (exit 1); exit 1; }; }
+ ;;
+
+ *=*)
+ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
+ { (exit 1); exit 1; }; }
+ ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
+ eval "$ac_envvar='$ac_optarg'"
+ export $ac_envvar ;;
+
+ *)
+ # FIXME: should be removed in autoconf 3.0.
+ echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+ expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+ echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+ : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
+ ;;
+
+ esac
+done
+
+if test -n "$ac_prev"; then
+ ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+ { echo "$as_me: error: missing argument to $ac_option" >&2
+ { (exit 1); exit 1; }; }
+fi
+
+# Be sure to have absolute paths.
+for ac_var in exec_prefix prefix
+do
+ eval ac_val=$`echo $ac_var`
+ case $ac_val in
+ [\\/$]* | ?:[\\/]* | NONE | '' ) ;;
+ *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
+ { (exit 1); exit 1; }; };;
+ esac
+done
+
+# Be sure to have absolute paths.
+for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
+ localstatedir libdir includedir oldincludedir infodir mandir
+do
+ eval ac_val=$`echo $ac_var`
+ case $ac_val in
+ [\\/$]* | ?:[\\/]* ) ;;
+ *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
+ { (exit 1); exit 1; }; };;
+ esac
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+ if test "x$build_alias" = x; then
+ cross_compiling=maybe
+ echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
+ If a cross compiler is detected then cross compile mode will be used." >&2
+ elif test "x$build_alias" != "x$host_alias"; then
+ cross_compiling=yes
+ fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+ ac_srcdir_defaulted=yes
+ # Try the directory containing this script, then its parent.
+ ac_confdir=`(dirname "$0") 2>/dev/null ||
+$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$0" : 'X\(//\)[^/]' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$0" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ srcdir=$ac_confdir
+ if test ! -r $srcdir/$ac_unique_file; then
+ srcdir=..
+ fi
+else
+ ac_srcdir_defaulted=no
+fi
+if test ! -r $srcdir/$ac_unique_file; then
+ if test "$ac_srcdir_defaulted" = yes; then
+ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2
+ { (exit 1); exit 1; }; }
+ else
+ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
+ { (exit 1); exit 1; }; }
+ fi
+fi
+(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null ||
+ { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2
+ { (exit 1); exit 1; }; }
+srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
+ac_env_build_alias_set=${build_alias+set}
+ac_env_build_alias_value=$build_alias
+ac_cv_env_build_alias_set=${build_alias+set}
+ac_cv_env_build_alias_value=$build_alias
+ac_env_host_alias_set=${host_alias+set}
+ac_env_host_alias_value=$host_alias
+ac_cv_env_host_alias_set=${host_alias+set}
+ac_cv_env_host_alias_value=$host_alias
+ac_env_target_alias_set=${target_alias+set}
+ac_env_target_alias_value=$target_alias
+ac_cv_env_target_alias_set=${target_alias+set}
+ac_cv_env_target_alias_value=$target_alias
+ac_env_CCAS_set=${CCAS+set}
+ac_env_CCAS_value=$CCAS
+ac_cv_env_CCAS_set=${CCAS+set}
+ac_cv_env_CCAS_value=$CCAS
+ac_env_CCASFLAGS_set=${CCASFLAGS+set}
+ac_env_CCASFLAGS_value=$CCASFLAGS
+ac_cv_env_CCASFLAGS_set=${CCASFLAGS+set}
+ac_cv_env_CCASFLAGS_value=$CCASFLAGS
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+ # Omit some internal or obsolete options to make the list less imposing.
+ # This message is too long to be a string in the A/UX 3.1 sh.
+ cat <<_ACEOF
+\`configure' configures newlib 1.15.0 to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE. See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+ -h, --help display this help and exit
+ --help=short display options specific to this package
+ --help=recursive display the short help of all the included packages
+ -V, --version display version information and exit
+ -q, --quiet, --silent do not print \`checking...' messages
+ --cache-file=FILE cache test results in FILE [disabled]
+ -C, --config-cache alias for \`--cache-file=config.cache'
+ -n, --no-create do not create output files
+ --srcdir=DIR find the sources in DIR [configure dir or \`..']
+
+_ACEOF
+
+ cat <<_ACEOF
+Installation directories:
+ --prefix=PREFIX install architecture-independent files in PREFIX
+ [$ac_default_prefix]
+ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
+ [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+ --bindir=DIR user executables [EPREFIX/bin]
+ --sbindir=DIR system admin executables [EPREFIX/sbin]
+ --libexecdir=DIR program executables [EPREFIX/libexec]
+ --datadir=DIR read-only architecture-independent data [PREFIX/share]
+ --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
+ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
+ --localstatedir=DIR modifiable single-machine data [PREFIX/var]
+ --libdir=DIR object code libraries [EPREFIX/lib]
+ --includedir=DIR C header files [PREFIX/include]
+ --oldincludedir=DIR C header files for non-gcc [/usr/include]
+ --infodir=DIR info documentation [PREFIX/info]
+ --mandir=DIR man documentation [PREFIX/man]
+_ACEOF
+
+ cat <<\_ACEOF
+
+Program names:
+ --program-prefix=PREFIX prepend PREFIX to installed program names
+ --program-suffix=SUFFIX append SUFFIX to installed program names
+ --program-transform-name=PROGRAM run sed PROGRAM on installed program names
+
+System types:
+ --build=BUILD configure for building on BUILD [guessed]
+ --host=HOST cross-compile to build programs to run on HOST [BUILD]
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+ case $ac_init_help in
+ short | recursive ) echo "Configuration of newlib 1.15.0:";;
+ esac
+ cat <<\_ACEOF
+
+Optional Features:
+ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
+ --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
+ --enable-multilib build many library versions (default)
+ --enable-target-optspace optimize for space
+ --enable-malloc-debugging indicate malloc debugging requested
+ --enable-newlib-multithread enable support for multiple threads
+ --enable-newlib-iconv enable iconv library support
+ --enable-newlib-elix-level supply desired elix library level (1-4)
+ --disable-newlib-io-float disable printf/scanf family float support
+ --disable-newlib-supplied-syscalls disable newlib from supplying syscalls
+ --disable-dependency-tracking speeds up one-time build
+ --enable-dependency-tracking do not reject slow dependency extractors
+ --enable-maintainer-mode enable make rules and dependencies not useful
+ (and sometimes confusing) to the casual installer
+
+Some influential environment variables:
+ CCAS assembler compiler command (defaults to CC)
+ CCASFLAGS assembler compiler flags (defaults to CFLAGS)
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+_ACEOF
+fi
+
+if test "$ac_init_help" = "recursive"; then
+ # If there are subdirs, report their specific --help.
+ ac_popdir=`pwd`
+ for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+ test -d $ac_dir || continue
+ ac_builddir=.
+
+if test "$ac_dir" != .; then
+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+ # A "../" for each directory in $ac_dir_suffix.
+ ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
+else
+ ac_dir_suffix= ac_top_builddir=
+fi
+
+case $srcdir in
+ .) # No --srcdir option. We are building in place.
+ ac_srcdir=.
+ if test -z "$ac_top_builddir"; then
+ ac_top_srcdir=.
+ else
+ ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
+ fi ;;
+ [\\/]* | ?:[\\/]* ) # Absolute path.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir ;;
+ *) # Relative path.
+ ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_builddir$srcdir ;;
+esac
+
+# Do not use `cd foo && pwd` to compute absolute paths, because
+# the directories may not exist.
+case `pwd` in
+.) ac_abs_builddir="$ac_dir";;
+*)
+ case "$ac_dir" in
+ .) ac_abs_builddir=`pwd`;;
+ [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
+ *) ac_abs_builddir=`pwd`/"$ac_dir";;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_builddir=${ac_top_builddir}.;;
+*)
+ case ${ac_top_builddir}. in
+ .) ac_abs_top_builddir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
+ *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_srcdir=$ac_srcdir;;
+*)
+ case $ac_srcdir in
+ .) ac_abs_srcdir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
+ *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_srcdir=$ac_top_srcdir;;
+*)
+ case $ac_top_srcdir in
+ .) ac_abs_top_srcdir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
+ *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
+ esac;;
+esac
+
+ cd $ac_dir
+ # Check for guested configure; otherwise get Cygnus style configure.
+ if test -f $ac_srcdir/configure.gnu; then
+ echo
+ $SHELL $ac_srcdir/configure.gnu --help=recursive
+ elif test -f $ac_srcdir/configure; then
+ echo
+ $SHELL $ac_srcdir/configure --help=recursive
+ elif test -f $ac_srcdir/configure.ac ||
+ test -f $ac_srcdir/configure.in; then
+ echo
+ $ac_configure --help
+ else
+ echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+ fi
+ cd $ac_popdir
+ done
+fi
+
+test -n "$ac_init_help" && exit 0
+if $ac_init_version; then
+ cat <<\_ACEOF
+newlib configure 1.15.0
+generated by GNU Autoconf 2.59
+
+Copyright (C) 2003 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+ exit 0
+fi
+exec 5>config.log
+cat >&5 <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by newlib $as_me 1.15.0, which was
+generated by GNU Autoconf 2.59. Invocation command line was
+
+ $ $0 $@
+
+_ACEOF
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
+
+/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+hostinfo = `(hostinfo) 2>/dev/null || echo unknown`
+/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
+/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ echo "PATH: $as_dir"
+done
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_sep=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+ for ac_arg
+ do
+ case $ac_arg in
+ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ continue ;;
+ *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
+ ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ case $ac_pass in
+ 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
+ 2)
+ ac_configure_args1="$ac_configure_args1 '$ac_arg'"
+ if test $ac_must_keep_next = true; then
+ ac_must_keep_next=false # Got value, back to normal.
+ else
+ case $ac_arg in
+ *=* | --config-cache | -C | -disable-* | --disable-* \
+ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+ | -with-* | --with-* | -without-* | --without-* | --x)
+ case "$ac_configure_args0 " in
+ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+ esac
+ ;;
+ -* ) ac_must_keep_next=true ;;
+ esac
+ fi
+ ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
+ # Get rid of the leading space.
+ ac_sep=" "
+ ;;
+ esac
+ done
+done
+$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
+$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log. We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Be sure not to use single quotes in there, as some shells,
+# such as our DU 5.0 friend, will then `close' the trap.
+trap 'exit_status=$?
+ # Save into config.log some information that might help in debugging.
+ {
+ echo
+
+ cat <<\_ASBOX
+## ---------------- ##
+## Cache variables. ##
+## ---------------- ##
+_ASBOX
+ echo
+ # The following way of writing the cache mishandles newlines in values,
+{
+ (set) 2>&1 |
+ case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
+ *ac_space=\ *)
+ sed -n \
+ "s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
+ ;;
+ *)
+ sed -n \
+ "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+ ;;
+ esac;
+}
+ echo
+
+ cat <<\_ASBOX
+## ----------------- ##
+## Output variables. ##
+## ----------------- ##
+_ASBOX
+ echo
+ for ac_var in $ac_subst_vars
+ do
+ eval ac_val=$`echo $ac_var`
+ echo "$ac_var='"'"'$ac_val'"'"'"
+ done | sort
+ echo
+
+ if test -n "$ac_subst_files"; then
+ cat <<\_ASBOX
+## ------------- ##
+## Output files. ##
+## ------------- ##
+_ASBOX
+ echo
+ for ac_var in $ac_subst_files
+ do
+ eval ac_val=$`echo $ac_var`
+ echo "$ac_var='"'"'$ac_val'"'"'"
+ done | sort
+ echo
+ fi
+
+ if test -s confdefs.h; then
+ cat <<\_ASBOX
+## ----------- ##
+## confdefs.h. ##
+## ----------- ##
+_ASBOX
+ echo
+ sed "/^$/d" confdefs.h | sort
+ echo
+ fi
+ test "$ac_signal" != 0 &&
+ echo "$as_me: caught signal $ac_signal"
+ echo "$as_me: exit $exit_status"
+ } >&5
+ rm -f core *.core &&
+ rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
+ exit $exit_status
+ ' 0
+for ac_signal in 1 2 13 15; do
+ trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -rf conftest* confdefs.h
+# AIX cpp loses on an empty file, so make sure it contains at least a newline.
+echo >confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer explicitly selected file to automatically selected ones.
+if test -z "$CONFIG_SITE"; then
+ if test "x$prefix" != xNONE; then
+ CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+ else
+ CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+ fi
+fi
+for ac_site_file in $CONFIG_SITE; do
+ if test -r "$ac_site_file"; then
+ { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
+echo "$as_me: loading site script $ac_site_file" >&6;}
+ sed 's/^/| /' "$ac_site_file" >&5
+ . "$ac_site_file"
+ fi
+done
+
+if test -r "$cache_file"; then
+ # Some versions of bash will fail to source /dev/null (special
+ # files actually), so we avoid doing that.
+ if test -f "$cache_file"; then
+ { echo "$as_me:$LINENO: loading cache $cache_file" >&5
+echo "$as_me: loading cache $cache_file" >&6;}
+ case $cache_file in
+ [\\/]* | ?:[\\/]* ) . $cache_file;;
+ *) . ./$cache_file;;
+ esac
+ fi
+else
+ { echo "$as_me:$LINENO: creating cache $cache_file" >&5
+echo "$as_me: creating cache $cache_file" >&6;}
+ >$cache_file
+fi
+
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in `(set) 2>&1 |
+ sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
+ eval ac_old_set=\$ac_cv_env_${ac_var}_set
+ eval ac_new_set=\$ac_env_${ac_var}_set
+ eval ac_old_val="\$ac_cv_env_${ac_var}_value"
+ eval ac_new_val="\$ac_env_${ac_var}_value"
+ case $ac_old_set,$ac_new_set in
+ set,)
+ { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,set)
+ { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
+echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,);;
+ *)
+ if test "x$ac_old_val" != "x$ac_new_val"; then
+ { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
+echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+ { echo "$as_me:$LINENO: former value: $ac_old_val" >&5
+echo "$as_me: former value: $ac_old_val" >&2;}
+ { echo "$as_me:$LINENO: current value: $ac_new_val" >&5
+echo "$as_me: current value: $ac_new_val" >&2;}
+ ac_cache_corrupted=:
+ fi;;
+ esac
+ # Pass precious variables to config.status.
+ if test "$ac_new_set" = set; then
+ case $ac_new_val in
+ *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
+ ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+ *) ac_arg=$ac_var=$ac_new_val ;;
+ esac
+ case " $ac_configure_args " in
+ *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
+ *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+ esac
+ fi
+done
+if $ac_cache_corrupted; then
+ { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
+echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+ { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
+echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ac_aux_dir=
+for ac_dir in ../../../.. $srcdir/../../../..; do
+ if test -f $ac_dir/install-sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+ elif test -f $ac_dir/install.sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
+ elif test -f $ac_dir/shtool; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/shtool install -c"
+ break
+ fi
+done
+if test -z "$ac_aux_dir"; then
+ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in ../../../.. $srcdir/../../../.." >&5
+echo "$as_me: error: cannot find install-sh or install.sh in ../../../.. $srcdir/../../../.." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"
+ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
+
+
+
+# Make sure we can run config.sub.
+$ac_config_sub sun4 >/dev/null 2>&1 ||
+ { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5
+echo "$as_me: error: cannot run $ac_config_sub" >&2;}
+ { (exit 1); exit 1; }; }
+
+echo "$as_me:$LINENO: checking build system type" >&5
+echo $ECHO_N "checking build system type... $ECHO_C" >&6
+if test "${ac_cv_build+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_cv_build_alias=$build_alias
+test -z "$ac_cv_build_alias" &&
+ ac_cv_build_alias=`$ac_config_guess`
+test -z "$ac_cv_build_alias" &&
+ { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
+echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
+ { (exit 1); exit 1; }; }
+ac_cv_build=`$ac_config_sub $ac_cv_build_alias` ||
+ { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5
+echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;}
+ { (exit 1); exit 1; }; }
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_build" >&5
+echo "${ECHO_T}$ac_cv_build" >&6
+build=$ac_cv_build
+build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+
+am__api_version="1.9"
+# Find a good install program. We prefer a C program (faster),
+# so one script is as good as another. But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
+# ./install, which can be erroneously created by make from ./install.sh.
+echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
+echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
+if test -z "$INSTALL"; then
+if test "${ac_cv_path_install+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in
+ ./ | .// | /cC/* | \
+ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+ ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
+ /usr/ucb/* ) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+ # Don't use installbsd from OSF since it installs stuff as root
+ # by default.
+ for ac_prog in ginstall scoinst install; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
+ if test $ac_prog = install &&
+ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # AIX install. It has an incompatible calling convention.
+ :
+ elif test $ac_prog = install &&
+ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # program-specific install script used by HP pwplus--don't use.
+ :
+ else
+ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+ break 3
+ fi
+ fi
+ done
+ done
+ ;;
+esac
+done
+
+
+fi
+ if test "${ac_cv_path_install+set}" = set; then
+ INSTALL=$ac_cv_path_install
+ else
+ # As a last resort, use the slow shell script. We don't cache a
+ # path for INSTALL within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the path is relative.
+ INSTALL=$ac_install_sh
+ fi
+fi
+echo "$as_me:$LINENO: result: $INSTALL" >&5
+echo "${ECHO_T}$INSTALL" >&6
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+echo "$as_me:$LINENO: checking whether build environment is sane" >&5
+echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+ if test "$*" = "X"; then
+ # -L didn't work.
+ set X `ls -t $srcdir/configure conftest.file`
+ fi
+ rm -f conftest.file
+ if test "$*" != "X $srcdir/configure conftest.file" \
+ && test "$*" != "X conftest.file $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken
+alias in your environment" >&5
+echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken
+alias in your environment" >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+
+ test "$2" = conftest.file
+ )
+then
+ # Ok.
+ :
+else
+ { { echo "$as_me:$LINENO: error: newly created file is older than distributed files!
+Check your system clock" >&5
+echo "$as_me: error: newly created file is older than distributed files!
+Check your system clock" >&2;}
+ { (exit 1); exit 1; }; }
+fi
+echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+test "$program_prefix" != NONE &&
+ program_transform_name="s,^,$program_prefix,;$program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+ program_transform_name="s,\$,$program_suffix,;$program_transform_name"
+# Double any \ or $. echo might interpret backslashes.
+# By default was `s,x,x', remove it if useless.
+cat <<\_ACEOF >conftest.sed
+s/[\\$]/&&/g;s/;s,x,x,$//
+_ACEOF
+program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
+rm conftest.sed
+
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+
+test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+ am_missing_run="$MISSING --run "
+else
+ am_missing_run=
+ { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5
+echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
+fi
+
+if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
+ # We used to keeping the `.' as first argument, in order to
+ # allow $(mkdir_p) to be used without argument. As in
+ # $(mkdir_p) $(somedir)
+ # where $(somedir) is conditionally defined. However this is wrong
+ # for two reasons:
+ # 1. if the package is installed by a user who cannot write `.'
+ # make install will fail,
+ # 2. the above comment should most certainly read
+ # $(mkdir_p) $(DESTDIR)$(somedir)
+ # so it does not work when $(somedir) is undefined and
+ # $(DESTDIR) is not.
+ # To support the latter case, we have to write
+ # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir),
+ # so the `.' trick is pointless.
+ mkdir_p='mkdir -p --'
+else
+ # On NextStep and OpenStep, the `mkdir' command does not
+ # recognize any option. It will interpret all options as
+ # directories to create, and then abort because `.' already
+ # exists.
+ for d in ./-p ./--version;
+ do
+ test -d $d && rmdir $d
+ done
+ # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
+ if test -f "$ac_aux_dir/mkinstalldirs"; then
+ mkdir_p='$(mkinstalldirs)'
+ else
+ mkdir_p='$(install_sh) -d'
+ fi
+fi
+
+for ac_prog in gawk mawk nawk awk
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_AWK+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$AWK"; then
+ ac_cv_prog_AWK="$AWK" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AWK="$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+AWK=$ac_cv_prog_AWK
+if test -n "$AWK"; then
+ echo "$as_me:$LINENO: result: $AWK" >&5
+echo "${ECHO_T}$AWK" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ test -n "$AWK" && break
+done
+
+echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6
+set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'`
+if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.make <<\_ACEOF
+all:
+ @echo 'ac_maketemp="$(MAKE)"'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=`
+if test -n "$ac_maketemp"; then
+ eval ac_cv_prog_make_${ac_make}_set=yes
+else
+ eval ac_cv_prog_make_${ac_make}_set=no
+fi
+rm -f conftest.make
+fi
+if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
+ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+ SET_MAKE=
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+ SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+ am__leading_dot=.
+else
+ am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+
+DEPDIR="${am__leading_dot}deps"
+
+ ac_config_commands="$ac_config_commands depfiles"
+
+
+am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+ @echo done
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
+echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# We grep out `Entering directory' and `Leaving directory'
+# messages which can occur if `w' ends up in MAKEFLAGS.
+# In particular we don't look at `^make:' because GNU make might
+# be invoked under some other name (usually "gmake"), in which
+# case it prints its new name instead of `make'.
+if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
+ am__include=include
+ am__quote=
+ _am_result=GNU
+fi
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+ echo '.include "confinc"' > confmf
+ if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
+ am__include=.include
+ am__quote="\""
+ _am_result=BSD
+ fi
+fi
+
+
+echo "$as_me:$LINENO: result: $_am_result" >&5
+echo "${ECHO_T}$_am_result" >&6
+rm -f confinc confmf
+
+# Check whether --enable-dependency-tracking or --disable-dependency-tracking was given.
+if test "${enable_dependency_tracking+set}" = set; then
+ enableval="$enable_dependency_tracking"
+
+fi;
+if test "x$enable_dependency_tracking" != xno; then
+ am_depcomp="$ac_aux_dir/depcomp"
+ AMDEPBACKSLASH='\'
+fi
+
+
+if test "x$enable_dependency_tracking" != xno; then
+ AMDEP_TRUE=
+ AMDEP_FALSE='#'
+else
+ AMDEP_TRUE='#'
+ AMDEP_FALSE=
+fi
+
+
+
+
+# Check whether --enable-multilib or --disable-multilib was given.
+if test "${enable_multilib+set}" = set; then
+ enableval="$enable_multilib"
+ case "${enableval}" in
+ yes) multilib=yes ;;
+ no) multilib=no ;;
+ *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for multilib option" >&5
+echo "$as_me: error: bad value ${enableval} for multilib option" >&2;}
+ { (exit 1); exit 1; }; } ;;
+ esac
+else
+ multilib=yes
+fi;
+# Check whether --enable-target-optspace or --disable-target-optspace was given.
+if test "${enable_target_optspace+set}" = set; then
+ enableval="$enable_target_optspace"
+ case "${enableval}" in
+ yes) target_optspace=yes ;;
+ no) target_optspace=no ;;
+ *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for target-optspace option" >&5
+echo "$as_me: error: bad value ${enableval} for target-optspace option" >&2;}
+ { (exit 1); exit 1; }; } ;;
+ esac
+else
+ target_optspace=
+fi;
+# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
+if test "${enable_malloc_debugging+set}" = set; then
+ enableval="$enable_malloc_debugging"
+ case "${enableval}" in
+ yes) malloc_debugging=yes ;;
+ no) malloc_debugging=no ;;
+ *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for malloc-debugging option" >&5
+echo "$as_me: error: bad value ${enableval} for malloc-debugging option" >&2;}
+ { (exit 1); exit 1; }; } ;;
+ esac
+else
+ malloc_debugging=
+fi;
+# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
+if test "${enable_newlib_multithread+set}" = set; then
+ enableval="$enable_newlib_multithread"
+ case "${enableval}" in
+ yes) newlib_multithread=yes ;;
+ no) newlib_multithread=no ;;
+ *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-multithread option" >&5
+echo "$as_me: error: bad value ${enableval} for newlib-multithread option" >&2;}
+ { (exit 1); exit 1; }; } ;;
+ esac
+else
+ newlib_multithread=yes
+fi;
+# Check whether --enable-newlib-iconv or --disable-newlib-iconv was given.
+if test "${enable_newlib_iconv+set}" = set; then
+ enableval="$enable_newlib_iconv"
+ if test "${newlib_iconv+set}" != set; then
+ case "${enableval}" in
+ yes) newlib_iconv=yes ;;
+ no) newlib_iconv=no ;;
+ *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-iconv option" >&5
+echo "$as_me: error: bad value ${enableval} for newlib-iconv option" >&2;}
+ { (exit 1); exit 1; }; } ;;
+ esac
+ fi
+else
+ newlib_iconv=${newlib_iconv}
+fi;
+# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
+if test "${enable_newlib_elix_level+set}" = set; then
+ enableval="$enable_newlib_elix_level"
+ case "${enableval}" in
+ 0) newlib_elix_level=0 ;;
+ 1) newlib_elix_level=1 ;;
+ 2) newlib_elix_level=2 ;;
+ 3) newlib_elix_level=3 ;;
+ 4) newlib_elix_level=4 ;;
+ *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-elix-level option" >&5
+echo "$as_me: error: bad value ${enableval} for newlib-elix-level option" >&2;}
+ { (exit 1); exit 1; }; } ;;
+ esac
+else
+ newlib_elix_level=0
+fi;
+# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
+if test "${enable_newlib_io_float+set}" = set; then
+ enableval="$enable_newlib_io_float"
+ case "${enableval}" in
+ yes) newlib_io_float=yes ;;
+ no) newlib_io_float=no ;;
+ *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-io-float option" >&5
+echo "$as_me: error: bad value ${enableval} for newlib-io-float option" >&2;}
+ { (exit 1); exit 1; }; } ;;
+ esac
+else
+ newlib_io_float=yes
+fi;
+# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
+if test "${enable_newlib_supplied_syscalls+set}" = set; then
+ enableval="$enable_newlib_supplied_syscalls"
+ case "${enableval}" in
+ yes) newlib_may_supply_syscalls=yes ;;
+ no) newlib_may_supply_syscalls=no ;;
+ *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-supplied-syscalls option" >&5
+echo "$as_me: error: bad value ${enableval} for newlib-supplied-syscalls option" >&2;}
+ { (exit 1); exit 1; }; } ;;
+ esac
+else
+ newlib_may_supply_syscalls=yes
+fi;
+
+
+if test x${newlib_may_supply_syscalls} = xyes; then
+ MAY_SUPPLY_SYSCALLS_TRUE=
+ MAY_SUPPLY_SYSCALLS_FALSE='#'
+else
+ MAY_SUPPLY_SYSCALLS_TRUE='#'
+ MAY_SUPPLY_SYSCALLS_FALSE=
+fi
+
+
+
+test -z "${with_target_subdir}" && with_target_subdir=.
+
+if test "${srcdir}" = "."; then
+ if test "${with_target_subdir}" != "."; then
+ newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
+ else
+ newlib_basedir="${srcdir}/${with_multisrctop}../../.."
+ fi
+else
+ newlib_basedir="${srcdir}/../../.."
+fi
+
+
+echo "$as_me:$LINENO: checking host system type" >&5
+echo $ECHO_N "checking host system type... $ECHO_C" >&6
+if test "${ac_cv_host+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_cv_host_alias=$host_alias
+test -z "$ac_cv_host_alias" &&
+ ac_cv_host_alias=$ac_cv_build_alias
+ac_cv_host=`$ac_config_sub $ac_cv_host_alias` ||
+ { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5
+echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;}
+ { (exit 1); exit 1; }; }
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_host" >&5
+echo "${ECHO_T}$ac_cv_host" >&6
+host=$ac_cv_host
+host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+
+
+# test to see if srcdir already configured
+if test "`cd $srcdir && pwd`" != "`pwd`" &&
+ test -f $srcdir/config.status; then
+ { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
+echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+ if (cygpath --version) >/dev/null 2>/dev/null; then
+ CYGPATH_W='cygpath -w'
+ else
+ CYGPATH_W=echo
+ fi
+fi
+
+
+# Define the identity of the package.
+ PACKAGE='newlib'
+ VERSION='1.15.0'
+
+
+# Some tools Automake needs.
+
+ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
+
+
+AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
+
+
+AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
+
+
+AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
+
+
+MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
+
+install_sh=${install_sh-"$am_aux_dir/install-sh"}
+
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'. However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_STRIP+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+ echo "$as_me:$LINENO: result: $STRIP" >&5
+echo "${ECHO_T}$STRIP" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+ ac_ct_STRIP=$STRIP
+ # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_STRIP"; then
+ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_STRIP="strip"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+ test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":"
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+ echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
+echo "${ECHO_T}$ac_ct_STRIP" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ STRIP=$ac_ct_STRIP
+else
+ STRIP="$ac_cv_prog_STRIP"
+fi
+
+fi
+INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
+
+# We need awk for the "check" target. The system "awk" is bad on
+# some platforms.
+# Always define AMTAR for backward compatibility.
+
+AMTAR=${AMTAR-"${am_missing_run}tar"}
+
+am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
+
+
+
+
+
+
+# FIXME: We temporarily define our own version of AC_PROG_CC. This is
+# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS. We
+# are probably using a cross compiler, which will not be able to fully
+# link an executable. This should really be fixed in autoconf
+# itself.
+
+
+
+
+
+
+
+# Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="gcc"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+
+depcc="$CC" am_compiler_list=
+
+echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
+echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6
+if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named `D' -- because `-MD' means `put the output
+ # in D'.
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+ # We will build objects and dependencies in a subdirectory because
+ # it helps to detect inapplicable dependency modes. For instance
+ # both Tru64's cc and ICC support -MD to output dependencies as a
+ # side effect of compilation, but ICC will put the dependencies in
+ # the current directory while Tru64 will put them in the object
+ # directory.
+ mkdir sub
+
+ am_cv_CC_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+ fi
+ for depmode in $am_compiler_list; do
+ # Setup a source with many dependencies, because some compilers
+ # like to wrap large dependency lists on column 80 (with \), and
+ # we should not choose a depcomp mode which is confused by this.
+ #
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ : > sub/conftest.c
+ for i in 1 2 3 4 5 6; do
+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
+ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+ # Solaris 8's {/usr,}/bin/sh.
+ touch sub/conftst$i.h
+ done
+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+ case $depmode in
+ nosideeffect)
+ # after this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ none) break ;;
+ esac
+ # We check with `-c' and `-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle `-M -o', and we need to detect this.
+ if depmode=$depmode \
+ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # or remarks (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored or not supported.
+ # When given -MP, icc 7.0 and 7.1 complain thusly:
+ # icc: Command line warning: ignoring option '-M'; no argument required
+ # The diagnosis changed in icc 8.0:
+ # icc: Command line remark: option '-MP' not supported
+ if (grep 'ignoring option' conftest.err ||
+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+ am_cv_CC_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
+ done
+
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_CC_dependencies_compiler_type=none
+fi
+
+fi
+echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
+echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6
+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
+
+
+
+if
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
+ am__fastdepCC_TRUE=
+ am__fastdepCC_FALSE='#'
+else
+ am__fastdepCC_TRUE='#'
+ am__fastdepCC_FALSE=
+fi
+
+
+if test -z "$CC"; then
+ # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+ ac_prog_rejected=yes
+ continue
+ fi
+ ac_cv_prog_CC="cc"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+if test $ac_prog_rejected = yes; then
+ # We found a bogon in the path, so make sure we never use it.
+ set dummy $ac_cv_prog_CC
+ shift
+ if test $# != 0; then
+ # We chose a different compiler from the bogus one.
+ # However, it has the same basename, so the bogon will be chosen
+ # first if we set CC to just the basename; use the full file name.
+ shift
+ ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+ fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable cc found in \$PATH" >&5
+echo "$as_me: error: no acceptable cc found in \$PATH" >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+echo "$as_me:$LINENO: checking whether we are using GNU C" >&5
+echo $ECHO_N "checking whether we are using GNU C... $ECHO_C" >&6
+if test "${ac_cv_c_compiler_gnu+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat > conftest.c <<EOF
+#ifdef __GNUC__
+ yes;
+#endif
+EOF
+if { ac_try='${CC-cc} -E conftest.c'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } | egrep yes >/dev/null 2>&1; then
+ ac_cv_c_compiler_gnu=yes
+else
+ ac_cv_c_compiler_gnu=no
+fi
+fi
+echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
+echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6
+
+if test $ac_cv_c_compiler_gnu = yes; then
+ GCC=yes
+ ac_test_CFLAGS="${CFLAGS+set}"
+ ac_save_CFLAGS="$CFLAGS"
+ CFLAGS=
+ ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+CFLAGS="-g"
+echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
+echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6
+if test "${ac_cv_prog_cc_g+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_prog_cc_g=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_prog_cc_g=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
+if test "$ac_test_CFLAGS" = set; then
+ CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+ if test "$GCC" = yes; then
+ CFLAGS="-g -O2"
+ else
+ CFLAGS="-g"
+ fi
+else
+ if test "$GCC" = yes; then
+ CFLAGS="-O2"
+ else
+ CFLAGS=
+ fi
+fi
+ if test "$ac_test_CFLAGS" = set; then
+ CFLAGS="$ac_save_CFLAGS"
+ elif test $ac_cv_prog_cc_g = yes; then
+ CFLAGS="-g -O2"
+ else
+ CFLAGS="-O2"
+ fi
+else
+ GCC=
+ test "${CFLAGS+set}" = set || CFLAGS="-g"
+fi
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
+set dummy ${ac_tool_prefix}as; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_AS+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$AS"; then
+ ac_cv_prog_AS="$AS" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AS="${ac_tool_prefix}as"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+AS=$ac_cv_prog_AS
+if test -n "$AS"; then
+ echo "$as_me:$LINENO: result: $AS" >&5
+echo "${ECHO_T}$AS" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_AS"; then
+ ac_ct_AS=$AS
+ # Extract the first word of "as", so it can be a program name with args.
+set dummy as; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_AS+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_AS"; then
+ ac_cv_prog_ac_ct_AS="$ac_ct_AS" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_AS="as"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+ac_ct_AS=$ac_cv_prog_ac_ct_AS
+if test -n "$ac_ct_AS"; then
+ echo "$as_me:$LINENO: result: $ac_ct_AS" >&5
+echo "${ECHO_T}$ac_ct_AS" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ AS=$ac_ct_AS
+else
+ AS="$ac_cv_prog_AS"
+fi
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ar; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_AR+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$AR"; then
+ ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AR="${ac_tool_prefix}ar"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+ echo "$as_me:$LINENO: result: $AR" >&5
+echo "${ECHO_T}$AR" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_AR"; then
+ ac_ct_AR=$AR
+ # Extract the first word of "ar", so it can be a program name with args.
+set dummy ar; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_AR+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_AR"; then
+ ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_AR="ar"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+ac_ct_AR=$ac_cv_prog_ac_ct_AR
+if test -n "$ac_ct_AR"; then
+ echo "$as_me:$LINENO: result: $ac_ct_AR" >&5
+echo "${ECHO_T}$ac_ct_AR" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ AR=$ac_ct_AR
+else
+ AR="$ac_cv_prog_AR"
+fi
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_RANLIB+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+ echo "$as_me:$LINENO: result: $RANLIB" >&5
+echo "${ECHO_T}$RANLIB" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_RANLIB"; then
+ ac_ct_RANLIB=$RANLIB
+ # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_RANLIB"; then
+ ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_RANLIB="ranlib"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+ test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":"
+fi
+fi
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+ echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
+echo "${ECHO_T}$ac_ct_RANLIB" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ RANLIB=$ac_ct_RANLIB
+else
+ RANLIB="$ac_cv_prog_RANLIB"
+fi
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}readelf", so it can be a program name with args.
+set dummy ${ac_tool_prefix}readelf; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_READELF+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$READELF"; then
+ ac_cv_prog_READELF="$READELF" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_READELF="${ac_tool_prefix}readelf"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+READELF=$ac_cv_prog_READELF
+if test -n "$READELF"; then
+ echo "$as_me:$LINENO: result: $READELF" >&5
+echo "${ECHO_T}$READELF" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_READELF"; then
+ ac_ct_READELF=$READELF
+ # Extract the first word of "readelf", so it can be a program name with args.
+set dummy readelf; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_READELF+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_READELF"; then
+ ac_cv_prog_ac_ct_READELF="$ac_ct_READELF" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_READELF="readelf"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+ test -z "$ac_cv_prog_ac_ct_READELF" && ac_cv_prog_ac_ct_READELF=":"
+fi
+fi
+ac_ct_READELF=$ac_cv_prog_ac_ct_READELF
+if test -n "$ac_ct_READELF"; then
+ echo "$as_me:$LINENO: result: $ac_ct_READELF" >&5
+echo "${ECHO_T}$ac_ct_READELF" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ READELF=$ac_ct_READELF
+else
+ READELF="$ac_cv_prog_READELF"
+fi
+
+
+# Find a good install program. We prefer a C program (faster),
+# so one script is as good as another. But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
+# ./install, which can be erroneously created by make from ./install.sh.
+echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
+echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
+if test -z "$INSTALL"; then
+if test "${ac_cv_path_install+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in
+ ./ | .// | /cC/* | \
+ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+ ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
+ /usr/ucb/* ) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+ # Don't use installbsd from OSF since it installs stuff as root
+ # by default.
+ for ac_prog in ginstall scoinst install; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
+ if test $ac_prog = install &&
+ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # AIX install. It has an incompatible calling convention.
+ :
+ elif test $ac_prog = install &&
+ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # program-specific install script used by HP pwplus--don't use.
+ :
+ else
+ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+ break 3
+ fi
+ fi
+ done
+ done
+ ;;
+esac
+done
+
+
+fi
+ if test "${ac_cv_path_install+set}" = set; then
+ INSTALL=$ac_cv_path_install
+ else
+ # As a last resort, use the slow shell script. We don't cache a
+ # path for INSTALL within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the path is relative.
+ INSTALL=$ac_install_sh
+ fi
+fi
+echo "$as_me:$LINENO: result: $INSTALL" >&5
+echo "${ECHO_T}$INSTALL" >&6
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+
+# Hack to ensure that INSTALL won't be set to "../" with autoconf 2.13. */
+ac_given_INSTALL=$INSTALL
+
+echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6
+ # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
+if test "${enable_maintainer_mode+set}" = set; then
+ enableval="$enable_maintainer_mode"
+ USE_MAINTAINER_MODE=$enableval
+else
+ USE_MAINTAINER_MODE=no
+fi;
+ echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5
+echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6
+
+
+if test $USE_MAINTAINER_MODE = yes; then
+ MAINTAINER_MODE_TRUE=
+ MAINTAINER_MODE_FALSE='#'
+else
+ MAINTAINER_MODE_TRUE='#'
+ MAINTAINER_MODE_FALSE=
+fi
+
+ MAINT=$MAINTAINER_MODE_TRUE
+
+
+# By default we simply use the C compiler to build assembly code.
+
+test "${CCAS+set}" = set || CCAS=$CC
+test "${CCASFLAGS+set}" = set || CCASFLAGS=$CFLAGS
+
+
+
+
+# We need AC_EXEEXT to keep automake happy in cygnus mode. However,
+# at least currently, we never actually build a program, so we never
+# need to use $(EXEEXT). Moreover, the test for EXEEXT normally
+# fails, because we are probably configuring with a cross compiler
+# which can't create executables. So we include AC_EXEEXT to keep
+# automake happy, but we don't execute it, since we don't care about
+# the result.
+if false; then
+
+ dummy_var=1
+fi
+
+. ${newlib_basedir}/configure.host
+
+newlib_cflags="${newlib_cflags} -fno-builtin"
+
+NEWLIB_CFLAGS=${newlib_cflags}
+
+
+LDFLAGS=${ldflags}
+
+
+
+
+if test x${newlib_elix_level} = x0; then
+ ELIX_LEVEL_0_TRUE=
+ ELIX_LEVEL_0_FALSE='#'
+else
+ ELIX_LEVEL_0_TRUE='#'
+ ELIX_LEVEL_0_FALSE=
+fi
+
+
+
+if test x${newlib_elix_level} = x1; then
+ ELIX_LEVEL_1_TRUE=
+ ELIX_LEVEL_1_FALSE='#'
+else
+ ELIX_LEVEL_1_TRUE='#'
+ ELIX_LEVEL_1_FALSE=
+fi
+
+
+
+if test x${newlib_elix_level} = x2; then
+ ELIX_LEVEL_2_TRUE=
+ ELIX_LEVEL_2_FALSE='#'
+else
+ ELIX_LEVEL_2_TRUE='#'
+ ELIX_LEVEL_2_FALSE=
+fi
+
+
+
+if test x${newlib_elix_level} = x3; then
+ ELIX_LEVEL_3_TRUE=
+ ELIX_LEVEL_3_FALSE='#'
+else
+ ELIX_LEVEL_3_TRUE='#'
+ ELIX_LEVEL_3_FALSE=
+fi
+
+
+
+if test x${newlib_elix_level} = x4; then
+ ELIX_LEVEL_4_TRUE=
+ ELIX_LEVEL_4_FALSE='#'
+else
+ ELIX_LEVEL_4_TRUE='#'
+ ELIX_LEVEL_4_FALSE=
+fi
+
+
+
+
+if test x${use_libtool} = xyes; then
+ USE_LIBTOOL_TRUE=
+ USE_LIBTOOL_FALSE='#'
+else
+ USE_LIBTOOL_TRUE='#'
+ USE_LIBTOOL_FALSE=
+fi
+
+
+# Hard-code OBJEXT. Normally it is set by AC_OBJEXT, but we
+# use oext, which is set in configure.host based on the target platform.
+OBJEXT=${oext}
+
+
+
+
+
+
+
+
+
+
+
+ ac_config_files="$ac_config_files Makefile"
+
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems. If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+{
+ (set) 2>&1 |
+ case `(ac_space=' '; set | grep ac_space) 2>&1` in
+ *ac_space=\ *)
+ # `set' does not quote correctly, so add quotes (double-quote
+ # substitution turns \\\\ into \\, and sed turns \\ into \).
+ sed -n \
+ "s/'/'\\\\''/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+ ;;
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n \
+ "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+ ;;
+ esac;
+} |
+ sed '
+ t clear
+ : clear
+ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+ t end
+ /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+ : end' >>confcache
+if diff $cache_file confcache >/dev/null 2>&1; then :; else
+ if test -w $cache_file; then
+ test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
+ cat confcache >$cache_file
+ else
+ echo "not updating unwritable cache $cache_file"
+ fi
+fi
+rm -f confcache
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# VPATH may cause trouble with some makes, so we remove $(srcdir),
+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+ ac_vpsub='/^[ ]*VPATH[ ]*=/{
+s/:*\$(srcdir):*/:/;
+s/:*\${srcdir}:*/:/;
+s/:*@srcdir@:*/:/;
+s/^\([^=]*=[ ]*\):*/\1/;
+s/:*$//;
+s/^[^=]*=[ ]*$//;
+}'
+fi
+
+# Transform confdefs.h into DEFS.
+# Protect against shell expansion while executing Makefile rules.
+# Protect against Makefile macro expansion.
+#
+# If the first sed substitution is executed (which looks for macros that
+# take arguments), then we branch to the quote section. Otherwise,
+# look for a macro that doesn't take arguments.
+cat >confdef2opt.sed <<\_ACEOF
+t clear
+: clear
+s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g
+t quote
+s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\),-D\1=\2,g
+t quote
+d
+: quote
+s,[ `~#$^&*(){}\\|;'"<>?],\\&,g
+s,\[,\\&,g
+s,\],\\&,g
+s,\$,$$,g
+p
+_ACEOF
+# We use echo to avoid assuming a particular line-breaking character.
+# The extra dot is to prevent the shell from consuming trailing
+# line-breaks from the sub-command output. A line-break within
+# single-quotes doesn't work because, if this script is created in a
+# platform that uses two characters for line-breaks (e.g., DOS), tr
+# would break.
+ac_LF_and_DOT=`echo; echo .`
+DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'`
+rm -f confdef2opt.sed
+
+
+ac_libobjs=
+ac_ltlibobjs=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+ # 1. Remove the extension, and $U if already installed.
+ ac_i=`echo "$ac_i" |
+ sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
+ # 2. Add them.
+ ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
+ ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
+if test -z "${MAY_SUPPLY_SYSCALLS_TRUE}" && test -z "${MAY_SUPPLY_SYSCALLS_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"MAY_SUPPLY_SYSCALLS\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"MAY_SUPPLY_SYSCALLS\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"MAINTAINER_MODE\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"MAINTAINER_MODE\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+if test -z "${ELIX_LEVEL_0_TRUE}" && test -z "${ELIX_LEVEL_0_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"ELIX_LEVEL_0\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"ELIX_LEVEL_0\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+if test -z "${ELIX_LEVEL_1_TRUE}" && test -z "${ELIX_LEVEL_1_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"ELIX_LEVEL_1\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"ELIX_LEVEL_1\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+if test -z "${ELIX_LEVEL_2_TRUE}" && test -z "${ELIX_LEVEL_2_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"ELIX_LEVEL_2\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"ELIX_LEVEL_2\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+if test -z "${ELIX_LEVEL_3_TRUE}" && test -z "${ELIX_LEVEL_3_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"ELIX_LEVEL_3\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"ELIX_LEVEL_3\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+if test -z "${ELIX_LEVEL_4_TRUE}" && test -z "${ELIX_LEVEL_4_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"ELIX_LEVEL_4\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"ELIX_LEVEL_4\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+if test -z "${USE_LIBTOOL_TRUE}" && test -z "${USE_LIBTOOL_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"USE_LIBTOOL\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"USE_LIBTOOL\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+: ${CONFIG_STATUS=./config.status}
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
+echo "$as_me: creating $CONFIG_STATUS" >&6;}
+cat >$CONFIG_STATUS <<_ACEOF
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+SHELL=\${CONFIG_SHELL-$SHELL}
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+## --------------------- ##
+## M4sh Initialization. ##
+## --------------------- ##
+
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
+ set -o posix
+fi
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# Support unset when possible.
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+ as_unset=unset
+else
+ as_unset=false
+fi
+
+
+# Work around bugs in pre-3.0 UWIN ksh.
+$as_unset ENV MAIL MAILPATH
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+for as_var in \
+ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
+ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
+ LC_TELEPHONE LC_TIME
+do
+ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
+ eval $as_var=C; export $as_var
+ else
+ $as_unset $as_var
+ fi
+done
+
+# Required to use basename.
+if expr a : '\(a\)' >/dev/null 2>&1; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+
+# Name of the executable.
+as_me=`$as_basename "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)$' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
+ /^X\/\(\/\/\)$/{ s//\1/; q; }
+ /^X\/\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+
+
+# PATH needs CR, and LINENO needs CR and PATH.
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+
+
+ as_lineno_1=$LINENO
+ as_lineno_2=$LINENO
+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x$as_lineno_3" = "x$as_lineno_2" || {
+ # Find who we are. Look in the path if we contain no path at all
+ # relative or not.
+ case $0 in
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+
+ ;;
+ esac
+ # We did not find ourselves, most probably we were run as `sh COMMAND'
+ # in which case we are not to be found in the path.
+ if test "x$as_myself" = x; then
+ as_myself=$0
+ fi
+ if test ! -f "$as_myself"; then
+ { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
+echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+ case $CONFIG_SHELL in
+ '')
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for as_base in sh bash ksh sh5; do
+ case $as_dir in
+ /*)
+ if ("$as_dir/$as_base" -c '
+ as_lineno_1=$LINENO
+ as_lineno_2=$LINENO
+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
+ $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
+ $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
+ CONFIG_SHELL=$as_dir/$as_base
+ export CONFIG_SHELL
+ exec "$CONFIG_SHELL" "$0" ${1+"$@"}
+ fi;;
+ esac
+ done
+done
+;;
+ esac
+
+ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
+ # uniformly replaced by the line number. The first 'sed' inserts a
+ # line-number line before each line; the second 'sed' does the real
+ # work. The second script uses 'N' to pair each line-number line
+ # with the numbered line, and appends trailing '-' during
+ # substitution so that $LINENO is not a special case at line end.
+ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
+ # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
+ sed '=' <$as_myself |
+ sed '
+ N
+ s,$,-,
+ : loop
+ s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
+ t loop
+ s,-$,,
+ s,^['$as_cr_digits']*\n,,
+ ' >$as_me.lineno &&
+ chmod +x $as_me.lineno ||
+ { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
+echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
+ { (exit 1); exit 1; }; }
+
+ # Don't try to exec as it changes $[0], causing all sort of problems
+ # (the dirname of $[0] is not the place where we might find the
+ # original and so on. Autoconf is especially sensible to this).
+ . ./$as_me.lineno
+ # Exit status is that of the last command.
+ exit
+}
+
+
+case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
+ *c*,-n*) ECHO_N= ECHO_C='
+' ECHO_T=' ' ;;
+ *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
+ *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
+esac
+
+if expr a : '\(a\)' >/dev/null 2>&1; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+rm -f conf$$ conf$$.exe conf$$.file
+echo >conf$$.file
+if ln -s conf$$.file conf$$ 2>/dev/null; then
+ # We could just check for DJGPP; but this test a) works b) is more generic
+ # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
+ if test -f conf$$.exe; then
+ # Don't use ln at all; we don't have any links
+ as_ln_s='cp -p'
+ else
+ as_ln_s='ln -s'
+ fi
+elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+else
+ as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.file
+
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p=:
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+fi
+
+as_executable_p="test -f"
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.
+as_nl='
+'
+IFS=" $as_nl"
+
+# CDPATH.
+$as_unset CDPATH
+
+exec 6>&1
+
+# Open the log real soon, to keep \$[0] and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling. Logging --version etc. is OK.
+exec 5>>config.log
+{
+ echo
+ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+} >&5
+cat >&5 <<_CSEOF
+
+This file was extended by newlib $as_me 1.15.0, which was
+generated by GNU Autoconf 2.59. Invocation command line was
+
+ CONFIG_FILES = $CONFIG_FILES
+ CONFIG_HEADERS = $CONFIG_HEADERS
+ CONFIG_LINKS = $CONFIG_LINKS
+ CONFIG_COMMANDS = $CONFIG_COMMANDS
+ $ $0 $@
+
+_CSEOF
+echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
+echo >&5
+_ACEOF
+
+# Files that config.status was made for.
+if test -n "$ac_config_files"; then
+ echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
+fi
+
+if test -n "$ac_config_headers"; then
+ echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
+fi
+
+if test -n "$ac_config_links"; then
+ echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
+fi
+
+if test -n "$ac_config_commands"; then
+ echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+
+ac_cs_usage="\
+\`$as_me' instantiates files from templates according to the
+current configuration.
+
+Usage: $0 [OPTIONS] [FILE]...
+
+ -h, --help print this help, then exit
+ -V, --version print version number, then exit
+ -q, --quiet do not print progress messages
+ -d, --debug don't remove temporary files
+ --recheck update $as_me by reconfiguring in the same conditions
+ --file=FILE[:TEMPLATE]
+ instantiate the configuration file FILE
+
+Configuration files:
+$config_files
+
+Configuration commands:
+$config_commands
+
+Report bugs to <bug-autoconf@gnu.org>."
+_ACEOF
+
+cat >>$CONFIG_STATUS <<_ACEOF
+ac_cs_version="\\
+newlib config.status 1.15.0
+configured by $0, generated by GNU Autoconf 2.59,
+ with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
+
+Copyright (C) 2003 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+srcdir=$srcdir
+INSTALL="$INSTALL"
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+# If no file are specified by the user, then we need to provide default
+# value. By we need to know if files were specified by the user.
+ac_need_defaults=:
+while test $# != 0
+do
+ case $1 in
+ --*=*)
+ ac_option=`expr "x$1" : 'x\([^=]*\)='`
+ ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
+ ac_shift=:
+ ;;
+ -*)
+ ac_option=$1
+ ac_optarg=$2
+ ac_shift=shift
+ ;;
+ *) # This is not an option, so the user has probably given explicit
+ # arguments.
+ ac_option=$1
+ ac_need_defaults=false;;
+ esac
+
+ case $ac_option in
+ # Handling of the options.
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+ ac_cs_recheck=: ;;
+ --version | --vers* | -V )
+ echo "$ac_cs_version"; exit 0 ;;
+ --he | --h)
+ # Conflict between --help and --header
+ { { echo "$as_me:$LINENO: error: ambiguous option: $1
+Try \`$0 --help' for more information." >&5
+echo "$as_me: error: ambiguous option: $1
+Try \`$0 --help' for more information." >&2;}
+ { (exit 1); exit 1; }; };;
+ --help | --hel | -h )
+ echo "$ac_cs_usage"; exit 0 ;;
+ --debug | --d* | -d )
+ debug=: ;;
+ --file | --fil | --fi | --f )
+ $ac_shift
+ CONFIG_FILES="$CONFIG_FILES $ac_optarg"
+ ac_need_defaults=false;;
+ --header | --heade | --head | --hea )
+ $ac_shift
+ CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
+ ac_need_defaults=false;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil | --si | --s)
+ ac_cs_silent=: ;;
+
+ # This is an error.
+ -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
+Try \`$0 --help' for more information." >&5
+echo "$as_me: error: unrecognized option: $1
+Try \`$0 --help' for more information." >&2;}
+ { (exit 1); exit 1; }; } ;;
+
+ *) ac_config_targets="$ac_config_targets $1" ;;
+
+ esac
+ shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+ exec 6>/dev/null
+ ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+if \$ac_cs_recheck; then
+ echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
+ exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+fi
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<_ACEOF
+#
+# INIT-COMMANDS section.
+#
+
+AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+
+_ACEOF
+
+
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+for ac_config_target in $ac_config_targets
+do
+ case "$ac_config_target" in
+ # Handling of arguments.
+ "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+ "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+ *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
+echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
+ { (exit 1); exit 1; }; };;
+ esac
+done
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used. Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+ test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
+fi
+
+# Have a temporary directory for convenience. Make it in the build tree
+# simply because there is no reason to put it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Create a temporary directory, and hook for its removal unless debugging.
+$debug ||
+{
+ trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
+ trap '{ (exit 1); exit 1; }' 1 2 13 15
+}
+
+# Create a (secure) tmp directory for tmp files.
+
+{
+ tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
+ test -n "$tmp" && test -d "$tmp"
+} ||
+{
+ tmp=./confstat$$-$RANDOM
+ (umask 077 && mkdir $tmp)
+} ||
+{
+ echo "$me: cannot create a temporary directory in ." >&2
+ { (exit 1); exit 1; }
+}
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<_ACEOF
+
+#
+# CONFIG_FILES section.
+#
+
+# No need to generate the scripts if there are no CONFIG_FILES.
+# This happens for instance when ./config.status config.h
+if test -n "\$CONFIG_FILES"; then
+ # Protect against being on the right side of a sed subst in config.status.
+ sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
+ s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
+s,@SHELL@,$SHELL,;t t
+s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
+s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t
+s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
+s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
+s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t
+s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
+s,@exec_prefix@,$exec_prefix,;t t
+s,@prefix@,$prefix,;t t
+s,@program_transform_name@,$program_transform_name,;t t
+s,@bindir@,$bindir,;t t
+s,@sbindir@,$sbindir,;t t
+s,@libexecdir@,$libexecdir,;t t
+s,@datadir@,$datadir,;t t
+s,@sysconfdir@,$sysconfdir,;t t
+s,@sharedstatedir@,$sharedstatedir,;t t
+s,@localstatedir@,$localstatedir,;t t
+s,@libdir@,$libdir,;t t
+s,@includedir@,$includedir,;t t
+s,@oldincludedir@,$oldincludedir,;t t
+s,@infodir@,$infodir,;t t
+s,@mandir@,$mandir,;t t
+s,@build_alias@,$build_alias,;t t
+s,@host_alias@,$host_alias,;t t
+s,@target_alias@,$target_alias,;t t
+s,@DEFS@,$DEFS,;t t
+s,@ECHO_C@,$ECHO_C,;t t
+s,@ECHO_N@,$ECHO_N,;t t
+s,@ECHO_T@,$ECHO_T,;t t
+s,@LIBS@,$LIBS,;t t
+s,@MAY_SUPPLY_SYSCALLS_TRUE@,$MAY_SUPPLY_SYSCALLS_TRUE,;t t
+s,@MAY_SUPPLY_SYSCALLS_FALSE@,$MAY_SUPPLY_SYSCALLS_FALSE,;t t
+s,@newlib_basedir@,$newlib_basedir,;t t
+s,@build@,$build,;t t
+s,@build_cpu@,$build_cpu,;t t
+s,@build_vendor@,$build_vendor,;t t
+s,@build_os@,$build_os,;t t
+s,@host@,$host,;t t
+s,@host_cpu@,$host_cpu,;t t
+s,@host_vendor@,$host_vendor,;t t
+s,@host_os@,$host_os,;t t
+s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t
+s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t
+s,@INSTALL_DATA@,$INSTALL_DATA,;t t
+s,@CYGPATH_W@,$CYGPATH_W,;t t
+s,@PACKAGE@,$PACKAGE,;t t
+s,@VERSION@,$VERSION,;t t
+s,@ACLOCAL@,$ACLOCAL,;t t
+s,@AUTOCONF@,$AUTOCONF,;t t
+s,@AUTOMAKE@,$AUTOMAKE,;t t
+s,@AUTOHEADER@,$AUTOHEADER,;t t
+s,@MAKEINFO@,$MAKEINFO,;t t
+s,@install_sh@,$install_sh,;t t
+s,@STRIP@,$STRIP,;t t
+s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t
+s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t
+s,@mkdir_p@,$mkdir_p,;t t
+s,@AWK@,$AWK,;t t
+s,@SET_MAKE@,$SET_MAKE,;t t
+s,@am__leading_dot@,$am__leading_dot,;t t
+s,@AMTAR@,$AMTAR,;t t
+s,@am__tar@,$am__tar,;t t
+s,@am__untar@,$am__untar,;t t
+s,@CC@,$CC,;t t
+s,@DEPDIR@,$DEPDIR,;t t
+s,@am__include@,$am__include,;t t
+s,@am__quote@,$am__quote,;t t
+s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t
+s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t
+s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t
+s,@CCDEPMODE@,$CCDEPMODE,;t t
+s,@am__fastdepCC_TRUE@,$am__fastdepCC_TRUE,;t t
+s,@am__fastdepCC_FALSE@,$am__fastdepCC_FALSE,;t t
+s,@AS@,$AS,;t t
+s,@ac_ct_AS@,$ac_ct_AS,;t t
+s,@AR@,$AR,;t t
+s,@ac_ct_AR@,$ac_ct_AR,;t t
+s,@RANLIB@,$RANLIB,;t t
+s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t
+s,@READELF@,$READELF,;t t
+s,@ac_ct_READELF@,$ac_ct_READELF,;t t
+s,@MAINTAINER_MODE_TRUE@,$MAINTAINER_MODE_TRUE,;t t
+s,@MAINTAINER_MODE_FALSE@,$MAINTAINER_MODE_FALSE,;t t
+s,@MAINT@,$MAINT,;t t
+s,@CCAS@,$CCAS,;t t
+s,@CCASFLAGS@,$CCASFLAGS,;t t
+s,@NEWLIB_CFLAGS@,$NEWLIB_CFLAGS,;t t
+s,@LDFLAGS@,$LDFLAGS,;t t
+s,@ELIX_LEVEL_0_TRUE@,$ELIX_LEVEL_0_TRUE,;t t
+s,@ELIX_LEVEL_0_FALSE@,$ELIX_LEVEL_0_FALSE,;t t
+s,@ELIX_LEVEL_1_TRUE@,$ELIX_LEVEL_1_TRUE,;t t
+s,@ELIX_LEVEL_1_FALSE@,$ELIX_LEVEL_1_FALSE,;t t
+s,@ELIX_LEVEL_2_TRUE@,$ELIX_LEVEL_2_TRUE,;t t
+s,@ELIX_LEVEL_2_FALSE@,$ELIX_LEVEL_2_FALSE,;t t
+s,@ELIX_LEVEL_3_TRUE@,$ELIX_LEVEL_3_TRUE,;t t
+s,@ELIX_LEVEL_3_FALSE@,$ELIX_LEVEL_3_FALSE,;t t
+s,@ELIX_LEVEL_4_TRUE@,$ELIX_LEVEL_4_TRUE,;t t
+s,@ELIX_LEVEL_4_FALSE@,$ELIX_LEVEL_4_FALSE,;t t
+s,@USE_LIBTOOL_TRUE@,$USE_LIBTOOL_TRUE,;t t
+s,@USE_LIBTOOL_FALSE@,$USE_LIBTOOL_FALSE,;t t
+s,@OBJEXT@,$OBJEXT,;t t
+s,@oext@,$oext,;t t
+s,@aext@,$aext,;t t
+s,@lpfx@,$lpfx,;t t
+s,@libm_machine_dir@,$libm_machine_dir,;t t
+s,@machine_dir@,$machine_dir,;t t
+s,@sys_dir@,$sys_dir,;t t
+s,@LIBOBJS@,$LIBOBJS,;t t
+s,@LTLIBOBJS@,$LTLIBOBJS,;t t
+CEOF
+
+_ACEOF
+
+ cat >>$CONFIG_STATUS <<\_ACEOF
+ # Split the substitutions into bite-sized pieces for seds with
+ # small command number limits, like on Digital OSF/1 and HP-UX.
+ ac_max_sed_lines=48
+ ac_sed_frag=1 # Number of current file.
+ ac_beg=1 # First line for current file.
+ ac_end=$ac_max_sed_lines # Line after last line for current file.
+ ac_more_lines=:
+ ac_sed_cmds=
+ while $ac_more_lines; do
+ if test $ac_beg -gt 1; then
+ sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
+ else
+ sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
+ fi
+ if test ! -s $tmp/subs.frag; then
+ ac_more_lines=false
+ else
+ # The purpose of the label and of the branching condition is to
+ # speed up the sed processing (if there are no `@' at all, there
+ # is no need to browse any of the substitutions).
+ # These are the two extra sed commands mentioned above.
+ (echo ':t
+ /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
+ if test -z "$ac_sed_cmds"; then
+ ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
+ else
+ ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
+ fi
+ ac_sed_frag=`expr $ac_sed_frag + 1`
+ ac_beg=$ac_end
+ ac_end=`expr $ac_end + $ac_max_sed_lines`
+ fi
+ done
+ if test -z "$ac_sed_cmds"; then
+ ac_sed_cmds=cat
+ fi
+fi # test -n "$CONFIG_FILES"
+
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
+ # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+ case $ac_file in
+ - | *:- | *:-:* ) # input from stdin
+ cat >$tmp/stdin
+ ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+ *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+ * ) ac_file_in=$ac_file.in ;;
+ esac
+
+ # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
+ ac_dir=`(dirname "$ac_file") 2>/dev/null ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$ac_file" : 'X\(//\)[^/]' \| \
+ X"$ac_file" : 'X\(//\)$' \| \
+ X"$ac_file" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$ac_file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ { if $as_mkdir_p; then
+ mkdir -p "$ac_dir"
+ else
+ as_dir="$ac_dir"
+ as_dirs=
+ while test ! -d "$as_dir"; do
+ as_dirs="$as_dir $as_dirs"
+ as_dir=`(dirname "$as_dir") 2>/dev/null ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ done
+ test ! -n "$as_dirs" || mkdir $as_dirs
+ fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
+echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
+ { (exit 1); exit 1; }; }; }
+
+ ac_builddir=.
+
+if test "$ac_dir" != .; then
+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+ # A "../" for each directory in $ac_dir_suffix.
+ ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
+else
+ ac_dir_suffix= ac_top_builddir=
+fi
+
+case $srcdir in
+ .) # No --srcdir option. We are building in place.
+ ac_srcdir=.
+ if test -z "$ac_top_builddir"; then
+ ac_top_srcdir=.
+ else
+ ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
+ fi ;;
+ [\\/]* | ?:[\\/]* ) # Absolute path.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir ;;
+ *) # Relative path.
+ ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_builddir$srcdir ;;
+esac
+
+# Do not use `cd foo && pwd` to compute absolute paths, because
+# the directories may not exist.
+case `pwd` in
+.) ac_abs_builddir="$ac_dir";;
+*)
+ case "$ac_dir" in
+ .) ac_abs_builddir=`pwd`;;
+ [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
+ *) ac_abs_builddir=`pwd`/"$ac_dir";;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_builddir=${ac_top_builddir}.;;
+*)
+ case ${ac_top_builddir}. in
+ .) ac_abs_top_builddir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
+ *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_srcdir=$ac_srcdir;;
+*)
+ case $ac_srcdir in
+ .) ac_abs_srcdir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
+ *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_srcdir=$ac_top_srcdir;;
+*)
+ case $ac_top_srcdir in
+ .) ac_abs_top_srcdir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
+ *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
+ esac;;
+esac
+
+
+ case $INSTALL in
+ [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+ *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
+ esac
+
+ if test x"$ac_file" != x-; then
+ { echo "$as_me:$LINENO: creating $ac_file" >&5
+echo "$as_me: creating $ac_file" >&6;}
+ rm -f "$ac_file"
+ fi
+ # Let's still pretend it is `configure' which instantiates (i.e., don't
+ # use $as_me), people would be surprised to read:
+ # /* config.h. Generated by config.status. */
+ if test x"$ac_file" = x-; then
+ configure_input=
+ else
+ configure_input="$ac_file. "
+ fi
+ configure_input=$configure_input"Generated from `echo $ac_file_in |
+ sed 's,.*/,,'` by configure."
+
+ # First look for the input files in the build tree, otherwise in the
+ # src tree.
+ ac_file_inputs=`IFS=:
+ for f in $ac_file_in; do
+ case $f in
+ -) echo $tmp/stdin ;;
+ [\\/$]*)
+ # Absolute (can't be DOS-style, as IFS=:)
+ test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+echo "$as_me: error: cannot find input file: $f" >&2;}
+ { (exit 1); exit 1; }; }
+ echo "$f";;
+ *) # Relative
+ if test -f "$f"; then
+ # Build tree
+ echo "$f"
+ elif test -f "$srcdir/$f"; then
+ # Source tree
+ echo "$srcdir/$f"
+ else
+ # /dev/null tree
+ { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+echo "$as_me: error: cannot find input file: $f" >&2;}
+ { (exit 1); exit 1; }; }
+ fi;;
+ esac
+ done` || { (exit 1); exit 1; }
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+ sed "$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s,@configure_input@,$configure_input,;t t
+s,@srcdir@,$ac_srcdir,;t t
+s,@abs_srcdir@,$ac_abs_srcdir,;t t
+s,@top_srcdir@,$ac_top_srcdir,;t t
+s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t
+s,@builddir@,$ac_builddir,;t t
+s,@abs_builddir@,$ac_abs_builddir,;t t
+s,@top_builddir@,$ac_top_builddir,;t t
+s,@abs_top_builddir@,$ac_abs_top_builddir,;t t
+s,@INSTALL@,$ac_INSTALL,;t t
+" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
+ rm -f $tmp/stdin
+ if test x"$ac_file" != x-; then
+ mv $tmp/out $ac_file
+ else
+ cat $tmp/out
+ rm -f $tmp/out
+ fi
+
+done
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+
+#
+# CONFIG_COMMANDS section.
+#
+for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue
+ ac_dest=`echo "$ac_file" | sed 's,:.*,,'`
+ ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'`
+ ac_dir=`(dirname "$ac_dest") 2>/dev/null ||
+$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$ac_dest" : 'X\(//\)[^/]' \| \
+ X"$ac_dest" : 'X\(//\)$' \| \
+ X"$ac_dest" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$ac_dest" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ { if $as_mkdir_p; then
+ mkdir -p "$ac_dir"
+ else
+ as_dir="$ac_dir"
+ as_dirs=
+ while test ! -d "$as_dir"; do
+ as_dirs="$as_dir $as_dirs"
+ as_dir=`(dirname "$as_dir") 2>/dev/null ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ done
+ test ! -n "$as_dirs" || mkdir $as_dirs
+ fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
+echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
+ { (exit 1); exit 1; }; }; }
+
+ ac_builddir=.
+
+if test "$ac_dir" != .; then
+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+ # A "../" for each directory in $ac_dir_suffix.
+ ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
+else
+ ac_dir_suffix= ac_top_builddir=
+fi
+
+case $srcdir in
+ .) # No --srcdir option. We are building in place.
+ ac_srcdir=.
+ if test -z "$ac_top_builddir"; then
+ ac_top_srcdir=.
+ else
+ ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
+ fi ;;
+ [\\/]* | ?:[\\/]* ) # Absolute path.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir ;;
+ *) # Relative path.
+ ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_builddir$srcdir ;;
+esac
+
+# Do not use `cd foo && pwd` to compute absolute paths, because
+# the directories may not exist.
+case `pwd` in
+.) ac_abs_builddir="$ac_dir";;
+*)
+ case "$ac_dir" in
+ .) ac_abs_builddir=`pwd`;;
+ [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
+ *) ac_abs_builddir=`pwd`/"$ac_dir";;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_builddir=${ac_top_builddir}.;;
+*)
+ case ${ac_top_builddir}. in
+ .) ac_abs_top_builddir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
+ *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_srcdir=$ac_srcdir;;
+*)
+ case $ac_srcdir in
+ .) ac_abs_srcdir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
+ *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_srcdir=$ac_top_srcdir;;
+*)
+ case $ac_top_srcdir in
+ .) ac_abs_top_srcdir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
+ *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
+ esac;;
+esac
+
+
+ { echo "$as_me:$LINENO: executing $ac_dest commands" >&5
+echo "$as_me: executing $ac_dest commands" >&6;}
+ case $ac_dest in
+ depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
+ # Strip MF so we end up with the name of the file.
+ mf=`echo "$mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile or not.
+ # We used to match only the files named `Makefile.in', but
+ # some people rename them; so instead we look at the file content.
+ # Grep'ing the first line is not enough: some people post-process
+ # each Makefile.in and add a new line on top of each file to say so.
+ # So let's grep whole file.
+ if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
+ dirpart=`(dirname "$mf") 2>/dev/null ||
+$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$mf" : 'X\(//\)[^/]' \| \
+ X"$mf" : 'X\(//\)$' \| \
+ X"$mf" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$mf" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ else
+ continue
+ fi
+ # Extract the definition of DEPDIR, am__include, and am__quote
+ # from the Makefile without running `make'.
+ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+ test -z "$DEPDIR" && continue
+ am__include=`sed -n 's/^am__include = //p' < "$mf"`
+ test -z "am__include" && continue
+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+ # When using ansi2knr, U may be empty or an underscore; expand it
+ U=`sed -n 's/^U = //p' < "$mf"`
+ # Find all dependency output files, they are included files with
+ # $(DEPDIR) in their names. We invoke sed twice because it is the
+ # simplest approach to changing $(DEPDIR) to its actual value in the
+ # expansion.
+ for file in `sed -n "
+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+ # Make sure the directory exists.
+ test -f "$dirpart/$file" && continue
+ fdir=`(dirname "$file") 2>/dev/null ||
+$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$file" : 'X\(//\)[^/]' \| \
+ X"$file" : 'X\(//\)$' \| \
+ X"$file" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ { if $as_mkdir_p; then
+ mkdir -p $dirpart/$fdir
+ else
+ as_dir=$dirpart/$fdir
+ as_dirs=
+ while test ! -d "$as_dir"; do
+ as_dirs="$as_dir $as_dirs"
+ as_dir=`(dirname "$as_dir") 2>/dev/null ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ done
+ test ! -n "$as_dirs" || mkdir $as_dirs
+ fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5
+echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;}
+ { (exit 1); exit 1; }; }; }
+
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
+ done
+done
+ ;;
+ esac
+done
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+
+{ (exit 0); exit 0; }
+_ACEOF
+chmod +x $CONFIG_STATUS
+ac_clean_files=$ac_clean_files_save
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded. So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status. When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+ ac_cs_success=:
+ ac_config_status_args=
+ test "$silent" = yes &&
+ ac_config_status_args="$ac_config_status_args --quiet"
+ exec 5>/dev/null
+ $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+ exec 5>>config.log
+ # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+ # would make configure fail if this is the last instruction.
+ $ac_cs_success || { (exit 1); exit 1; }
+fi
+
diff -burN newlib-1.15.0/newlib/libc/sys/psp/configure.in newlib-psp/newlib/libc/sys/psp/configure.in
--- newlib-1.15.0/newlib/libc/sys/psp/configure.in 1970-01-01 01:00:00.000000000 +0100
+++ newlib-psp/newlib/libc/sys/psp/configure.in 2007-03-10 18:02:39.000000000 +0100
@@ -0,0 +1,14 @@
+dnl This is the newlib/libc/sys/sun4 configure.in file.
+dnl Process this file with autoconf to produce a configure script.
+
+AC_PREREQ(2.59)
+AC_INIT([newlib],[NEWLIB_VERSION])
+AC_CONFIG_SRCDIR([libcglue.c])
+
+dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake.
+AC_CONFIG_AUX_DIR(../../../..)
+
+NEWLIB_CONFIGURE(../../..)
+
+AC_CONFIG_FILES(Makefile)
+AC_OUTPUT
diff -burN newlib-1.15.0/newlib/libc/sys/psp/crt0.c newlib-psp/newlib/libc/sys/psp/crt0.c
--- newlib-1.15.0/newlib/libc/sys/psp/crt0.c 1970-01-01 01:00:00.000000000 +0100
+++ newlib-psp/newlib/libc/sys/psp/crt0.c 2007-03-10 18:02:39.000000000 +0100
@@ -0,0 +1,3 @@
+/* The real crt0.c lives in PSPSDK. */
+
+void _start() { }
diff -burN newlib-1.15.0/newlib/libc/sys/psp/fdman.c newlib-psp/newlib/libc/sys/psp/fdman.c
--- newlib-1.15.0/newlib/libc/sys/psp/fdman.c 1970-01-01 01:00:00.000000000 +0100
+++ newlib-psp/newlib/libc/sys/psp/fdman.c 2007-03-10 18:02:39.000000000 +0100
@@ -0,0 +1,115 @@
+/*
+ * PSP Software Development Kit - http://www.pspdev.org
+ * -----------------------------------------------------------------------
+ * Licensed under the BSD license, see LICENSE in PSPSDK root for details.
+ *
+ * fdman.c - File descriptor management.
+ *
+ * Copyright (c) 2006 Rafael Cabezas <rafpsp@gmail.com>
+ */
+#include <psptypes.h>
+#include <errno.h>
+#include "fdman.h"
+
+extern int pspDisableInterrupts();
+extern void pspEnableInterrupts(int);
+
+static __psp_descriptormap_type __psp_descriptor_data_pool[__PSP_FILENO_MAX];
+__psp_descriptormap_type *__psp_descriptormap [__PSP_FILENO_MAX];
+
+void __psp_fdman_init()
+{
+ int scefd;
+
+ /* Initialize descriptor data*/
+ memset(__psp_descriptor_data_pool, 0, sizeof(__psp_descriptormap_type) *__PSP_FILENO_MAX);
+ /* Initialize descriptor map*/
+ memset(__psp_descriptormap, 0, sizeof(__psp_descriptormap_type*)*__PSP_FILENO_MAX);
+
+ scefd = sceKernelStdin();
+ if ((scefd >= 0) && (scefd < __PSP_FILENO_MAX)) {
+ __psp_descriptormap[0] = &__psp_descriptor_data_pool[0];
+ __psp_descriptormap[0]->sce_descriptor = scefd;
+ __psp_descriptormap[0]->type = __PSP_DESCRIPTOR_TYPE_TTY;
+ }
+ scefd = sceKernelStdout();
+ if ((scefd >= 0) && (scefd < __PSP_FILENO_MAX)) {
+ __psp_descriptormap[1] = &__psp_descriptor_data_pool[1];
+ __psp_descriptormap[1]->sce_descriptor = scefd;
+ __psp_descriptormap[1]->type = __PSP_DESCRIPTOR_TYPE_TTY;
+ }
+ scefd = sceKernelStderr();
+ if ((scefd >= 0) && (scefd < __PSP_FILENO_MAX)) {
+ __psp_descriptormap[2] = &__psp_descriptor_data_pool[2];
+ __psp_descriptormap[2]->sce_descriptor = scefd;
+ __psp_descriptormap[2]->type = __PSP_DESCRIPTOR_TYPE_TTY;
+ }
+}
+
+int __psp_fdman_get_new_descriptor()
+{
+ int i = 0;
+ int inten;
+
+ inten = pspDisableInterrupts(); /* lock here to make thread safe */
+ for (i = 0; i < __PSP_FILENO_MAX; i++) {
+ if (__psp_descriptormap[i] == NULL) {
+ __psp_descriptormap[i] = &__psp_descriptor_data_pool[i];
+ __psp_descriptormap[i]->ref_count++;
+ pspEnableInterrupts(inten); /* release lock */
+ return i;
+ }
+ }
+ pspEnableInterrupts(inten); /* release lock */
+
+ errno = ENOMEM;
+ return -1;
+}
+
+int __psp_fdman_get_dup_descriptor(int fd)
+{
+ int i = 0;
+ int inten;
+
+ if (!__PSP_IS_FD_VALID(fd)) {
+ errno = EBADF;
+ return -1;
+ }
+
+ inten = pspDisableInterrupts(); /* lock here to make thread safe */
+ for (i = 0; i < __PSP_FILENO_MAX; i++) {
+ if (__psp_descriptormap[i] == NULL) {
+ __psp_descriptormap[i] = &__psp_descriptor_data_pool[fd];
+ __psp_descriptormap[i]->ref_count++;
+ pspEnableInterrupts(inten); /* release lock */
+ return i;
+ }
+ }
+ pspEnableInterrupts(inten); /* release lock */
+
+ errno = ENOMEM;
+ return -1;
+}
+
+void __psp_fdman_release_descriptor(int fd)
+{
+ if (!__PSP_IS_FD_VALID(fd)) {
+ errno = EBADF;
+ return;
+ }
+
+ __psp_descriptormap[fd]->ref_count--;
+
+ if (__psp_descriptormap[fd]->ref_count == 0) {
+
+ if (__psp_descriptormap[fd]->filename != NULL) {
+ free(__psp_descriptormap[fd]->filename);
+ }
+ __psp_descriptormap[fd]->filename = NULL;
+ __psp_descriptormap[fd]->sce_descriptor = 0;
+ __psp_descriptormap[fd]->type = 0;
+ __psp_descriptormap[fd]->flags = 0;
+
+ }
+ __psp_descriptormap[fd] = NULL;
+}
diff -burN newlib-1.15.0/newlib/libc/sys/psp/fdman.h newlib-psp/newlib/libc/sys/psp/fdman.h
--- newlib-1.15.0/newlib/libc/sys/psp/fdman.h 1970-01-01 01:00:00.000000000 +0100
+++ newlib-psp/newlib/libc/sys/psp/fdman.h 2007-03-10 18:02:39.000000000 +0100
@@ -0,0 +1,44 @@
+/*
+ * PSP Software Development Kit - http://www.pspdev.org
+ * -----------------------------------------------------------------------
+ * Licensed under the BSD license, see LICENSE in PSPSDK root for details.
+ *
+ * fdman.h - File descriptor management.
+ *
+ * Copyright (c) 2006 Rafael Cabezas <rafpsp@gmail.com>
+ */
+
+#ifndef _FDMAN_H_
+ #define _FDMAN_H_
+
+ #define __PSP_FILENO_MAX 1024
+
+ #define __PSP_IS_FD_VALID(FD) \
+ ( (FD >= 0) && (FD < __PSP_FILENO_MAX) && (__psp_descriptormap[FD] != NULL) )
+
+ #define __PSP_IS_FD_OF_TYPE(FD, TYPE) \
+ ( (__PSP_IS_FD_VALID(FD)) && (__psp_descriptormap[FD]->type == TYPE) )
+
+ typedef enum {
+ __PSP_DESCRIPTOR_TYPE_FILE ,
+ __PSP_DESCRIPTOR_TYPE_PIPE ,
+ __PSP_DESCRIPTOR_TYPE_SOCKET,
+ __PSP_DESCRIPTOR_TYPE_TTY
+ } __psp_fdman_fd_types;
+
+ typedef struct {
+ char * filename;
+ u8 type;
+ u32 sce_descriptor;
+ u32 flags;
+ u32 ref_count;
+ } __psp_descriptormap_type;
+
+ extern __psp_descriptormap_type *__psp_descriptormap[__PSP_FILENO_MAX];
+
+ void __psp_fdman_init();
+ int __psp_fdman_get_new_descriptor();
+ int __psp_fdman_get_dup_descriptor(int fd);
+ void __psp_fdman_release_descriptor(int fd);
+
+#endif
diff -burN newlib-1.15.0/newlib/libc/sys/psp/include/netdb.h newlib-psp/newlib/libc/sys/psp/include/netdb.h
--- newlib-1.15.0/newlib/libc/sys/psp/include/netdb.h 1970-01-01 01:00:00.000000000 +0100
+++ newlib-psp/newlib/libc/sys/psp/include/netdb.h 2007-03-10 18:02:39.000000000 +0100
@@ -0,0 +1,36 @@
+/* Simple gethostbyname and gethostbyaddr replacements, note not thread safe */
+#ifndef __NETDB_H__
+#define __NETDB_H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define NETDB_INTERNAL -1 /* see errno */
+#define NETDB_SUCCESS 0 /* no problem */
+#define HOST_NOT_FOUND 1 /* Authoritative Answer Host not found */
+#define TRY_AGAIN 2 /* Non-Authoritative Host not found, or SERVERFAIL */
+#define NO_RECOVERY 3 /* Non recoverable errors, FORMERR, REFUSED, NOTIMP */
+#define NO_DATA 4 /* Valid name, no data record of requested type */
+#define NO_ADDRESS NO_DATA /* no address, look for MX record */
+
+extern int h_errno;
+
+struct hostent
+{
+ char *h_name;
+ char **h_aliases;
+ int h_addrtype;
+ int h_length;
+ char **h_addr_list;
+ char *h_addr;
+};
+
+struct hostent *gethostbyaddr(const void *addr, int len, int type);
+struct hostent *gethostbyname(const char *name);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff -burN newlib-1.15.0/newlib/libc/sys/psp/interrupt.S newlib-psp/newlib/libc/sys/psp/interrupt.S
--- newlib-1.15.0/newlib/libc/sys/psp/interrupt.S 1970-01-01 01:00:00.000000000 +0100
+++ newlib-psp/newlib/libc/sys/psp/interrupt.S 2007-03-10 18:02:39.000000000 +0100
@@ -0,0 +1,66 @@
+
+ .set noreorder
+ .set noat
+
+ .global pspDisableInterrupts
+ .ent pspDisableInterrupts
+
+pspDisableInterrupts:
+ mfic $v0, $0
+ mtic $0, $0
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ jr $ra
+ nop
+
+ .end pspDisableInterrupts
+
+ .global pspEnableInterrupts
+ .ent pspEnableInterrupts
+
+pspEnableInterrupts:
+ mtic $a0, $0
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ jr $ra
+ nop
+
+ .end pspEnableInterrupts
diff -burN newlib-1.15.0/newlib/libc/sys/psp/libcglue.c newlib-psp/newlib/libc/sys/psp/libcglue.c
--- newlib-1.15.0/newlib/libc/sys/psp/libcglue.c 1970-01-01 01:00:00.000000000 +0100
+++ newlib-psp/newlib/libc/sys/psp/libcglue.c 2007-03-10 18:02:39.000000000 +0100
@@ -0,0 +1,936 @@
+/*
+ * PSP Software Development Kit - http://www.pspdev.org
+ * -----------------------------------------------------------------------
+ * Licensed under the BSD license, see LICENSE in PSPSDK root for details.
+ *
+ * libcglue.c - Newlib-compatible system calls.
+ *
+ * Copyright (c) 2005 Marcus R. Brown <mrbrown@ocgnet.org>
+ * Copyright (c) 2005 James Forshaw <tyranid@gmail.com>
+ * Copyright (c) 2005 John Kelley <ps2dev@kelley.ca>
+ * Copyright (c) 2005 Jim Paris <jim@jtan.com>
+ *
+ */
+#include <errno.h>
+#include <malloc.h>
+#include <reent.h>
+#include <stdarg.h>
+#include <stdlib.h>
+#include <string.h>
+#include <time.h>
+#include <sys/fcntl.h>
+#include <sys/stat.h>
+#include <sys/time.h>
+#include <sys/types.h>
+#include <sys/unistd.h>
+#include <sys/dirent.h>
+#include <sys/socket.h>
+
+#include <psptypes.h>
+#include <pspiofilemgr.h>
+#include <pspmodulemgr.h>
+#include <pspsysmem.h>
+#include <pspthreadman.h>
+#include <psputils.h>
+#include <psputility.h>
+#include <pspstdio.h>
+#include <pspintrman.h>
+#include "fdman.h"
+
+extern char __psp_cwd[MAXPATHLEN + 1];
+extern void __psp_init_cwd(char *argv_0);
+extern int __psp_path_absolute(const char *in, char *out, int len);
+extern int pspDisableInterrupts();
+extern void pspEnableInterrupts(int);
+
+/* The following functions are defined in socket.c. They have weak linkage so
+ that the user doesn't have to link against the PSP network libraries if they
+ don't use the sockets API. */
+extern int __psp_socket_close(int s) __attribute__((weak));
+extern ssize_t __psp_socket_recv(int s, void *buf, size_t len, int flags) __attribute__((weak));
+extern ssize_t __psp_socket_send(int s, const void *buf, size_t len, int flags) __attribute__((weak));
+
+extern int pipe(int fildes[2]);
+extern int __psp_pipe_close(int filedes);
+extern int __psp_pipe_nonblocking_read(int fd, void *buf, size_t len);
+extern int __psp_pipe_read(int fd, void *buf, size_t len);
+extern int __psp_pipe_write(int fd, const void *buf, size_t size);
+extern int __psp_pipe_nonblocking_write(int fd, const void *buf, size_t len);
+
+int __psp_set_errno(int code);
+
+#ifdef F___psp_set_errno
+int __psp_set_errno(int code)
+{
+ if ((code & 0x80010000) == 0x80010000) {
+ errno = code & 0xFFFF;
+ return -1;
+ }
+ return code;
+}
+#endif
+
+#ifdef F_getcwd
+char *getcwd(char *buf, size_t size)
+{
+ if(!buf) {
+ errno = EINVAL;
+ return NULL;
+ }
+
+ if(strlen(__psp_cwd) >= size) {
+ errno = ERANGE;
+ return NULL;
+ }
+
+ strcpy(buf, __psp_cwd);
+ return buf;
+}
+#endif
+
+#ifdef F_chdir
+int chdir(const char *path)
+{
+ char dest[MAXPATHLEN + 1];
+ SceUID uid;
+
+ if(__psp_path_absolute(path, dest, MAXPATHLEN) < 0) {
+ errno = ENAMETOOLONG;
+ return -1;
+ }
+
+ /* sceIoChdir doesn't give an indication of whether it worked,
+ so test for existence by attempting to open the dir */
+ uid = sceIoDopen(dest);
+ if(uid < 0) {
+ errno = ENOTDIR;
+ return -1;
+ }
+ sceIoDclose(uid);
+
+ sceIoChdir(dest);
+ strcpy(__psp_cwd, dest);
+ return 0;
+}
+#endif
+
+#ifdef F_mkdir
+int mkdir(const char *pathname, mode_t mode)
+{
+ char dest[MAXPATHLEN + 1];
+
+ if(__psp_path_absolute(pathname, dest, MAXPATHLEN) < 0) {
+ errno = ENAMETOOLONG;
+ return -1;
+ }
+
+ return __psp_set_errno(sceIoMkdir(dest, mode));
+}
+#endif
+
+#ifdef F_rmdir
+int rmdir(const char *pathname)
+{
+ char dest[MAXPATHLEN + 1];
+
+ if(__psp_path_absolute(pathname, dest, MAXPATHLEN) < 0) {
+ errno = ENAMETOOLONG;
+ return -1;
+ }
+
+ return __psp_set_errno(sceIoRmdir(dest));
+}
+#endif
+
+#ifdef F_realpath
+char *realpath(const char *path, char *resolved_path)
+{
+ if(!path || !resolved_path) {
+ errno = EINVAL;
+ return NULL;
+ }
+ if(__psp_path_absolute(path, resolved_path, MAXPATHLEN) < 0) {
+ errno = ENAMETOOLONG;
+ return NULL;
+ }
+ if(access(resolved_path, F_OK) < 0) {
+ errno = ENOENT;
+ return NULL;
+ }
+ return resolved_path;
+}
+#endif
+
+/* Wrappers of the standard open(), close(), read(), write(), unlink() and lseek() routines. */
+#ifdef F__open
+int _open(const char *name, int flags, int mode)
+{
+ int scefd, fd;
+ int sce_flags;
+ char dest[MAXPATHLEN + 1];
+
+ if(__psp_path_absolute(name, dest, MAXPATHLEN) < 0) {
+ errno = ENAMETOOLONG;
+ return -1;
+ }
+
+ /* O_RDONLY starts at 0, where PSP_O_RDONLY starts at 1, so remap the read/write
+ flags by adding 1. */
+ sce_flags = (flags & O_ACCMODE) + 1;
+
+ /* Translate standard open flags into the flags understood by the PSP kernel. */
+ if (flags & O_APPEND) {
+ sce_flags |= PSP_O_APPEND;
+ }
+ if (flags & O_CREAT) {
+ sce_flags |= PSP_O_CREAT;
+ }
+ if (flags & O_TRUNC) {
+ sce_flags |= PSP_O_TRUNC;
+ }
+ if (flags & O_EXCL) {
+ sce_flags |= PSP_O_EXCL;
+ }
+ if (flags & O_NONBLOCK) {
+ sce_flags |= PSP_O_NBLOCK;
+ }
+
+ scefd = sceIoOpen(dest, sce_flags, mode);
+ if (scefd >= 0) {
+ fd = __psp_fdman_get_new_descriptor();
+ if (fd != -1) {
+ __psp_descriptormap[fd]->sce_descriptor = scefd;
+ __psp_descriptormap[fd]->type = __PSP_DESCRIPTOR_TYPE_FILE;
+ __psp_descriptormap[fd]->flags = flags;
+ __psp_descriptormap[fd]->filename = strdup(dest);
+ return fd;
+ }
+ else {
+ sceIoClose(scefd);
+ errno = ENOMEM;
+ return -1;
+ }
+ }
+ else {
+ return __psp_set_errno(scefd);
+ }
+
+}
+#endif
+
+#ifdef F__close
+int _close(int fd)
+{
+ int ret = 0;
+
+ if (!__PSP_IS_FD_VALID(fd)) {
+ errno = EBADF;
+ return -1;
+ }
+
+ switch(__psp_descriptormap[fd]->type)
+ {
+ case __PSP_DESCRIPTOR_TYPE_FILE:
+ case __PSP_DESCRIPTOR_TYPE_TTY:
+ if (__psp_descriptormap[fd]->ref_count == 1) {
+ ret = __psp_set_errno(sceIoClose(__psp_descriptormap[fd]->sce_descriptor));
+ }
+ __psp_fdman_release_descriptor(fd);
+ return ret;
+ break;
+ case __PSP_DESCRIPTOR_TYPE_PIPE:
+ return __psp_pipe_close(fd);
+ break;
+ case __PSP_DESCRIPTOR_TYPE_SOCKET:
+ if (__psp_socket_close != NULL) {
+ ret = __psp_socket_close(fd);
+ return ret;
+ }
+ break;
+ default:
+ break;
+ }
+
+ errno = EBADF;
+ return -1;
+}
+#endif
+
+#ifdef F__read
+int _read(int fd, void *buf, size_t size)
+{
+ if (!__PSP_IS_FD_VALID(fd)) {
+ errno = EBADF;
+ return -1;
+ }
+
+ switch(__psp_descriptormap[fd]->type)
+ {
+ case __PSP_DESCRIPTOR_TYPE_FILE:
+ case __PSP_DESCRIPTOR_TYPE_TTY:
+ return __psp_set_errno(sceIoRead(__psp_descriptormap[fd]->sce_descriptor, buf, size));
+ break;
+ case __PSP_DESCRIPTOR_TYPE_PIPE:
+ if (__psp_descriptormap[fd]->flags & O_NONBLOCK) {
+ return __psp_pipe_nonblocking_read(fd, buf, size);
+ }
+ else {
+ return __psp_pipe_read(fd, buf, size);
+ }
+ break;
+ case __PSP_DESCRIPTOR_TYPE_SOCKET:
+ if (__psp_socket_recv != NULL) {
+ return __psp_socket_recv(fd, buf, size, 0);
+ }
+ break;
+ default:
+ break;
+ }
+
+ errno = EBADF;
+ return -1;
+
+}
+#endif
+
+#ifdef F__write
+int _write(int fd, const void *buf, size_t size)
+{
+ if (!__PSP_IS_FD_VALID(fd)) {
+ errno = EBADF;
+ return -1;
+ }
+
+ switch(__psp_descriptormap[fd]->type)
+ {
+ case __PSP_DESCRIPTOR_TYPE_FILE:
+ case __PSP_DESCRIPTOR_TYPE_TTY:
+ return __psp_set_errno(sceIoWrite(__psp_descriptormap[fd]->sce_descriptor, buf, size));
+ break;
+ case __PSP_DESCRIPTOR_TYPE_PIPE:
+ if (__psp_descriptormap[fd]->flags & O_NONBLOCK) {
+ return __psp_pipe_nonblocking_write(fd, buf, size);
+ }
+ else {
+ return __psp_pipe_write(fd, buf, size);
+ }
+ break;
+ break;
+ case __PSP_DESCRIPTOR_TYPE_SOCKET:
+ if (__psp_socket_send != NULL) {
+ return __psp_socket_send(fd, buf, size, 0);
+ }
+ break;
+ default:
+ break;
+ }
+
+ errno = EBADF;
+ return -1;
+}
+#endif
+
+#ifdef F__lseek
+off_t _lseek(int fd, off_t offset, int whence)
+{
+ if (!__PSP_IS_FD_VALID(fd)) {
+ errno = EBADF;
+ return -1;
+ }
+
+ switch(__psp_descriptormap[fd]->type)
+ {
+ case __PSP_DESCRIPTOR_TYPE_FILE:
+ /* We don't have to do anything with the whence argument because SEEK_* == PSP_SEEK_*. */
+ return (off_t) __psp_set_errno(sceIoLseek(__psp_descriptormap[fd]->sce_descriptor, offset, whence));
+ break;
+ case __PSP_DESCRIPTOR_TYPE_PIPE:
+ break;
+ case __PSP_DESCRIPTOR_TYPE_SOCKET:
+ break;
+ default:
+ break;
+ }
+
+ errno = EBADF;
+ return -1;
+
+}
+#endif
+
+#ifdef F__unlink
+int _unlink(const char *path)
+{
+ char dest[MAXPATHLEN + 1];
+
+ if(__psp_path_absolute(path, dest, MAXPATHLEN) < 0) {
+ errno = ENAMETOOLONG;
+ return -1;
+ }
+
+ return __psp_set_errno(sceIoRemove(dest));
+}
+#endif
+
+#ifdef F__link
+int _link(const char *name1, const char *name2)
+{
+ errno = ENOSYS;
+ return -1; /* not supported */
+}
+#endif
+
+#ifdef F_opendir
+DIR *opendir(const char *filename)
+{
+ char dest[MAXPATHLEN + 1];
+ DIR *dirp;
+ SceUID uid;
+
+ /* Normalize pathname so that opendir(".") works */
+ if(__psp_path_absolute(filename, dest, MAXPATHLEN) < 0) {
+ errno = ENOENT;
+ return NULL;
+ }
+
+ dirp = (DIR *)malloc(sizeof(DIR));
+
+ uid = sceIoDopen(dest);
+
+ if (uid < 0)
+ {
+ free(dirp);
+ (void) __psp_set_errno(uid);
+ return NULL;
+ }
+
+ dirp->uid = uid;
+
+ return dirp;
+}
+#endif
+
+#ifdef F_readdir
+struct dirent *readdir(DIR *dirp)
+{
+ int ret;
+
+ /* Zero the dirent, to avoid possible problems with sceIoDread */
+ memset(&dirp->de, 0, sizeof(struct dirent));
+
+ ret = sceIoDread(dirp->uid, (SceIoDirent *)&dirp->de);
+ if (ret == 0) {
+ /* EOF */
+ errno = 0;
+ return NULL;
+ }
+ if (ret < 0) {
+ (void) __psp_set_errno(ret);
+ return NULL;
+ }
+
+ return &dirp->de;
+}
+#endif
+
+#ifdef F_closedir
+int closedir(DIR *dirp)
+{
+ if (dirp != NULL)
+ {
+ int uid;
+ uid = dirp->uid;
+ free (dirp);
+ return __psp_set_errno(sceIoDclose(uid));
+ }
+ errno = EBADF;
+ return -1;
+}
+#endif
+
+/* Time routines. These wrap around the routines provided by the kernel. */
+#ifdef F__gettimeofday
+int _gettimeofday(struct timeval *tp, struct timezone *tzp)
+{
+ return __psp_set_errno(sceKernelLibcGettimeofday(tp, tzp));
+}
+
+#endif
+
+#if defined(F_clock)
+clock_t clock(void)
+{
+ return sceKernelLibcClock();
+}
+#endif
+
+#if defined(F_time)
+time_t time(time_t *t)
+{
+ return __psp_set_errno(sceKernelLibcTime(t));
+}
+#endif
+
+#if defined(F_sleep)
+unsigned int sleep(unsigned int secs) {
+ while(secs--) {
+ sceKernelDelayThreadCB(1000000);
+ }
+ return 0;
+}
+#endif
+
+/* PSP-compatible sbrk(). */
+#if defined(F__sbrk) || defined(F_glue__sbrk)
+/* TODO: Currently our default heap is set to the maximum available block size
+ when sbrk() is first called. Sony seems to always use a default of 64KB,
+ with the expectation that user programs will override the default size with
+ their own desired size. The only reason I can think of them doing this is
+ to allow each PRX to have their own seperate heap. I think that their
+ method is overkill for most user programs.
+
+ What I'd like to do instead is to use the default of 64KB for PRXes as Sony
+ does, but use the maximum available block size for executables. This avoids
+ the requirement of specifying the heap size manually in user programs.
+ However, we currently don't have a clean way to distinguish PRXes and normal
+ executables, so this code needs to be revisited once we do come up with a
+ way. */
+#define DEFAULT_PRX_HEAP_SIZE_KB 64
+
+/* If defined it specifies the desired size of the heap, in KB. */
+extern unsigned int sce_newlib_heap_kb_size __attribute__((weak));
+extern int __pspsdk_is_prx __attribute__((weak));
+
+/* UID of the memory block that represents the heap. */
+static SceUID __psp_heap_blockid;
+
+void * _sbrk(ptrdiff_t incr)
+{
+ static void * heap_bottom = NULL;
+ static void * heap_top = NULL;
+ static void * heap_ptr = NULL;
+
+ /* Has our heap been initialized? */
+ if (heap_bottom == NULL) {
+ /* No, initialize the heap. */
+ SceSize heap_size;
+
+ if (&sce_newlib_heap_kb_size != NULL) {
+ heap_size = sce_newlib_heap_kb_size * 1024;
+ } else {
+ if (&__pspsdk_is_prx != NULL) {
+ heap_size = DEFAULT_PRX_HEAP_SIZE_KB * 1024;
+ } else {
+ heap_size = sceKernelMaxFreeMemSize();
+ }
+ }
+
+ __psp_heap_blockid = sceKernelAllocPartitionMemory(2, "block", PSP_SMEM_Low, heap_size, NULL);
+ if (__psp_heap_blockid > 0) {
+ heap_bottom = sceKernelGetBlockHeadAddr(__psp_heap_blockid);
+ heap_ptr = heap_bottom;
+ heap_top = (unsigned char *) heap_bottom + heap_size;
+ }
+ }
+
+ void * heap_addr = (void *) -1;
+ void * next_heap_ptr = (void *) ((ptrdiff_t) heap_ptr + incr);
+ if ((heap_bottom != NULL) && (next_heap_ptr >= heap_bottom) && (next_heap_ptr < heap_top)) {
+ heap_addr = heap_ptr;
+ heap_ptr = next_heap_ptr;
+ }
+
+ return heap_addr;
+}
+
+/* Free the heap. */
+int __psp_free_heap(void)
+{
+ if (__psp_heap_blockid > 0) {
+ return sceKernelFreePartitionMemory(__psp_heap_blockid);
+ }
+
+ return __psp_heap_blockid;
+}
+#endif
+
+/* Other POSIX routines that must be defined. */
+#ifdef F__fstat
+int _fstat(int fd, struct stat *sbuf)
+{
+ int ret;
+ SceOff oldpos;
+ if (!__PSP_IS_FD_VALID(fd)) {
+ errno = EBADF;
+ return -1;
+ }
+
+ switch(__psp_descriptormap[fd]->type)
+ {
+ case __PSP_DESCRIPTOR_TYPE_TTY:
+ memset(sbuf, '\0', sizeof(struct stat));
+ sbuf->st_mode = S_IFCHR;
+ return 0;
+ break;
+ case __PSP_DESCRIPTOR_TYPE_FILE:
+ if (__psp_descriptormap[fd]->filename != NULL) {
+ ret = stat(__psp_descriptormap[fd]->filename, sbuf);
+
+ /* Find true size of the open file */
+ oldpos = sceIoLseek(__psp_descriptormap[fd]->sce_descriptor, 0, SEEK_CUR);
+ if (oldpos != (off_t) -1) {
+ sbuf->st_size = (off_t) sceIoLseek(__psp_descriptormap[fd]->sce_descriptor, 0, SEEK_END);
+ sceIoLseek(__psp_descriptormap[fd]->sce_descriptor, oldpos, SEEK_SET);
+ }
+ return ret;
+ }
+ break;
+ case __PSP_DESCRIPTOR_TYPE_PIPE:
+ case __PSP_DESCRIPTOR_TYPE_SOCKET:
+ default:
+ break;
+ }
+
+ errno = EBADF;
+ return -1;
+}
+#endif
+
+#ifdef F_isatty
+int isatty(int fd)
+{
+ if (!__PSP_IS_FD_VALID(fd)) {
+ errno = EBADF;
+ return 0;
+ }
+
+ if (__psp_descriptormap[fd]->type == __PSP_DESCRIPTOR_TYPE_TTY) {
+ return 1;
+ }
+ else {
+ return 0;
+ }
+}
+#endif
+
+#ifdef F__stat
+static time_t psp_to_epoch_time(ScePspDateTime psp_time)
+{
+ struct tm conv_time;
+ conv_time.tm_year = psp_time.year;
+ conv_time.tm_mon = psp_time.month;
+ conv_time.tm_mday = psp_time.day;
+ conv_time.tm_hour = psp_time.hour;
+ conv_time.tm_min = psp_time.minute;
+ conv_time.tm_sec = psp_time.second;
+ conv_time.tm_isdst = -1;
+ return mktime(&conv_time);
+}
+
+int _stat(const char *filename, struct stat *buf)
+{
+ SceIoStat psp_stat;
+ char dest[MAXPATHLEN + 1];
+ int ret;
+
+ if(__psp_path_absolute(filename, dest, MAXPATHLEN) < 0) {
+ errno = ENAMETOOLONG;
+ return -1;
+ }
+
+ memset(buf, '\0', sizeof(struct stat));
+ ret = sceIoGetstat(dest, &psp_stat);
+ if (ret < 0) {
+ return __psp_set_errno(ret);
+ }
+
+ buf->st_ctime = psp_to_epoch_time(psp_stat.st_ctime);
+ buf->st_atime = psp_to_epoch_time(psp_stat.st_atime);
+ buf->st_mtime = psp_to_epoch_time(psp_stat.st_mtime);
+
+ buf->st_mode = (psp_stat.st_mode & 0xfff) |
+ ((FIO_S_ISLNK(psp_stat.st_mode))?(S_IFLNK):(0)) |
+ ((FIO_S_ISREG(psp_stat.st_mode))?(S_IFREG):(0)) |
+ ((FIO_S_ISDIR(psp_stat.st_mode))?(S_IFDIR):(0));
+ buf->st_size = psp_stat.st_size;
+ return 0;
+}
+#endif
+
+/* from stat.h in ps2sdk, this function may be correct */
+#define FIO_CST_SIZE 0x0004
+
+#ifdef F_truncate
+int truncate(const char *filename, off_t length)
+{
+ SceIoStat psp_stat;
+ char dest[MAXPATHLEN + 1];
+
+ if(__psp_path_absolute(filename, dest, MAXPATHLEN) < 0) {
+ errno = ENAMETOOLONG;
+ return -1;
+ }
+
+ psp_stat.st_size = length;
+ if(length < 0)
+ {
+ errno = EINVAL;
+ return -1;
+ }
+ return __psp_set_errno(sceIoChstat(dest, &psp_stat, FIO_CST_SIZE));
+}
+#endif
+
+/* Unsupported newlib system calls. */
+#ifdef F__fork
+pid_t fork(void)
+{
+ errno = ENOSYS;
+ return (pid_t) -1;
+}
+#endif
+
+#ifdef F__getpid
+pid_t _getpid(void)
+{
+ errno = ENOSYS;
+ return (pid_t) -1;
+}
+#endif
+
+#ifdef F__kill
+int _kill(int unused, int unused2)
+{
+ errno = ENOSYS;
+ return -1;
+}
+#endif
+
+#ifdef F__wait
+pid_t _wait(int *unused)
+{
+ errno = ENOSYS;
+ return (pid_t) -1;
+}
+#endif
+
+#ifdef F_access
+int access(const char *fn, int flags)
+{
+ struct stat s;
+ if (stat(fn, &s))
+ return -1;
+ if (s.st_mode & S_IFDIR)
+ return 0;
+ if (flags & W_OK)
+ {
+ if (s.st_mode & S_IWRITE)
+ return 0;
+ errno = EACCES;
+ return -1;
+ }
+ return 0;
+}
+#endif
+
+#ifdef F__fcntl
+int _fcntl(int fd, int cmd, ...)
+{
+ if (!__PSP_IS_FD_VALID(fd)) {
+ errno = EBADF;
+ return -1;
+ }
+
+ switch (cmd)
+ {
+ case F_DUPFD:
+ {
+ return __psp_fdman_get_dup_descriptor(fd);
+ break;
+ }
+ case F_GETFL:
+ {
+ return __psp_descriptormap[fd]->flags;
+ break;
+ }
+ case F_SETFL:
+ {
+ int newfl;
+ va_list args;
+
+ va_start (args, cmd); /* Initialize the argument list. */
+ newfl = va_arg(args, int);
+ va_end (args); /* Clean up. */
+
+ __psp_descriptormap[fd]->flags = newfl;
+
+ switch(__psp_descriptormap[fd]->type)
+ {
+ case __PSP_DESCRIPTOR_TYPE_FILE:
+ break;
+ case __PSP_DESCRIPTOR_TYPE_PIPE:
+ break;
+ case __PSP_DESCRIPTOR_TYPE_SOCKET:
+ if (newfl & O_NONBLOCK)
+ {
+ int one = 1;
+ return setsockopt(fd, SOL_SOCKET, SO_NONBLOCK, (char *)&one, sizeof(one));
+ }
+ else
+ {
+ int zero = 0;
+ return setsockopt(fd, SOL_SOCKET, SO_NONBLOCK, (char *)&zero, sizeof(zero));
+ }
+ break;
+ default:
+ break;
+ }
+ return 0;
+ break;
+ }
+ }
+
+ errno = EBADF;
+ return -1;
+}
+#endif /* F__fcntl */
+
+#ifdef F_tzset
+void tzset(void)
+{
+ static int initialized = 0;
+
+ if (!initialized)
+ {
+ initialized = 1;
+
+ /* Don't init if TZ has already been set once, this probably means the user
+ wanted to override what we would set below. */
+ if (getenv("TZ") == NULL)
+ {
+ /* Initialize timezone from PSP configuration */
+ int tzOffset = 0;
+ sceUtilityGetSystemParamInt(PSP_SYSTEMPARAM_ID_INT_TIMEZONE, &tzOffset);
+ int tzOffsetAbs = tzOffset < 0 ? -tzOffset : tzOffset;
+ int hours = tzOffsetAbs / 60;
+ int minutes = tzOffsetAbs - hours * 60;
+ int pspDaylight = 0;
+ sceUtilityGetSystemParamInt(PSP_SYSTEMPARAM_ID_INT_DAYLIGHTSAVINGS, &pspDaylight);
+ static char tz[18];
+ sprintf(tz, "GMT%s%02i:%02i%s", tzOffset < 0 ? "+" : "-", hours, minutes, pspDaylight ? "daylight" : "");
+ setenv("TZ", tz, 1);
+ }
+ }
+
+ _tzset_r(_REENT);
+}
+#endif
+
+#ifdef F_mlock
+static unsigned int lock_count = 0;
+static unsigned int intr_flags = 0;
+
+void __malloc_lock(struct _reent *ptr)
+{
+ unsigned int flags = pspDisableInterrupts();
+
+ if (lock_count == 0) {
+ intr_flags = flags;
+ }
+
+ lock_count++;
+}
+
+void __malloc_unlock(struct _reent *ptr)
+{
+ if (--lock_count == 0) {
+ pspEnableInterrupts(intr_flags);
+ }
+}
+#endif
+
+/* Exit. */
+#if defined(F__exit) || defined(F_glue__exit)
+extern int sce_newlib_nocreate_thread_in_start __attribute__((weak));
+
+extern int __psp_free_heap(void);
+
+void _exit(int status)
+{
+ if (&sce_newlib_nocreate_thread_in_start == NULL) {
+ /* Free the heap created by _sbrk(). */
+ __psp_free_heap();
+
+ sceKernelSelfStopUnloadModule(1, 0, NULL);
+ } else {
+ if (status == 0) {
+ /* Free the heap created by _sbrk(). */
+ __psp_free_heap();
+ }
+
+ sceKernelExitThread(status);
+ }
+
+ while (1) ;
+}
+
+/* Note: This function is being linked into _exit.o.
+
+ Because __psp_libc_init is a weak import in crt0.c, the linker
+ chooses to ignore an object file in libc.a that contains just this
+ function, since it's not necessary for successful compilation.
+
+ By putting it instead in _exit.o, which is already used by crt0.c,
+ the linker sees __psp_libc_init and resolves the symbol properly.
+*/
+void __psp_libc_init(int argc, char *argv[])
+{
+ (void) argc;
+
+ /* Initialize cwd from this program's path */
+ __psp_init_cwd(argv[0]);
+
+ /* Initialize filedescriptor management */
+ __psp_fdman_init();
+}
+
+#endif /* F__exit */
+
+#ifdef F__rename
+int _rename(const char *old, const char *new)
+{
+ char oldname[MAXPATHLEN + 1];
+ char newname[MAXPATHLEN + 1];
+
+ if(__psp_path_absolute(old, oldname, MAXPATHLEN) < 0) {
+ errno = ENAMETOOLONG;
+ return -1;
+ }
+
+ if(__psp_path_absolute(new, newname, MAXPATHLEN) < 0) {
+ errno = ENAMETOOLONG;
+ return -1;
+ }
+
+ return __psp_set_errno(sceIoRename(oldname, newname));
+}
+#endif
+
+#ifdef F_nanosleep
+/* note: we don't use rem as we have no signals */
+int nanosleep(const struct timespec *req, struct timespec *rem)
+{
+ if( req == NULL )
+ return EFAULT;
+
+ if( rem != NULL ) {
+ rem->tv_sec = 0;
+ rem->tv_nsec = 0;
+ }
+
+ sceKernelDelayThreadCB( 1000000 * req->tv_sec + (req->tv_nsec / 1000) );
+
+ return 0;
+}
+#endif
+
diff -burN newlib-1.15.0/newlib/libc/sys/psp/netdb.c newlib-psp/newlib/libc/sys/psp/netdb.c
--- newlib-1.15.0/newlib/libc/sys/psp/netdb.c 1970-01-01 01:00:00.000000000 +0100
+++ newlib-psp/newlib/libc/sys/psp/netdb.c 2007-03-10 18:05:37.000000000 +0100
@@ -0,0 +1,103 @@
+/* Simple gethostbyname and gethostbyaddr replacements using the resolver lib */
+#include <stdio.h>
+#include <netdb.h>
+#include <netinet/in.h>
+#include <arpa/inet.h>
+#include <sys/socket.h>
+#include <pspkerneltypes.h>
+#include <pspnet_resolver.h>
+
+#define MAX_NAME 512
+
+#ifdef F_h_errno
+int h_errno = NETDB_SUCCESS;
+#endif
+
+#ifdef F_gethostbyaddr
+struct hostent *gethostbyaddr(const void *addr, int len, int type)
+{
+ static struct hostent ent;
+ static char * aliases[1] = { NULL };
+ char buf[1024];
+ static char sname[MAX_NAME] = "";
+ static struct in_addr saddr = { 0 };
+ static char *addrlist[2] = { (char *) &saddr, NULL };
+ int rid;
+ int err;
+
+ if((len != sizeof(struct in_addr)) || (type != AF_INET) || (addr == NULL))
+ {
+ h_errno = HOST_NOT_FOUND;
+ return NULL;
+ }
+
+ memcpy(&saddr, addr, len);
+
+ if(sceNetResolverCreate(&rid, buf, sizeof(buf)) < 0)
+ {
+ h_errno = NO_RECOVERY;
+ return NULL;
+ }
+
+ err = sceNetResolverStartAtoN(rid, &saddr, sname, sizeof(sname), 2, 3);
+ sceNetResolverStop(rid);
+ sceNetResolverDelete(rid);
+ if(err < 0)
+ {
+ h_errno = HOST_NOT_FOUND;
+ return NULL;
+ }
+
+ ent.h_name = sname;
+ ent.h_aliases = aliases;
+ ent.h_addrtype = AF_INET;
+ ent.h_length = sizeof(struct in_addr);
+ ent.h_addr_list = addrlist;
+ ent.h_addr = (char *) &saddr;
+
+ return &ent;
+}
+#endif
+
+#ifdef F_gethostbyname
+struct hostent *gethostbyname(const char *name)
+{
+ static struct hostent ent;
+ char buf[1024];
+ static char sname[MAX_NAME] = "";
+ static struct in_addr saddr = { 0 };
+ static char *addrlist[2] = { (char *) &saddr, NULL };
+ int rid;
+
+ if(sceNetInetInetAton(name, &saddr) == 0)
+ {
+ int err;
+
+ if(sceNetResolverCreate(&rid, buf, sizeof(buf)) < 0)
+ {
+ h_errno = NO_RECOVERY;
+ return NULL;
+ }
+
+ err = sceNetResolverStartNtoA(rid, name, &saddr, 2, 3);
+ sceNetResolverDelete(rid);
+ if(err < 0)
+ {
+ h_errno = HOST_NOT_FOUND;
+ return NULL;
+ }
+
+ }
+
+ snprintf(sname, MAX_NAME, "%s", name);
+ ent.h_name = sname;
+ ent.h_aliases = 0;
+ ent.h_addrtype = AF_INET;
+ ent.h_length = sizeof(struct in_addr);
+ ent.h_addr_list = addrlist;
+ ent.h_addr = (char *) &saddr;
+
+ return &ent;
+}
+
+#endif
diff -burN newlib-1.15.0/newlib/libc/sys/psp/netinet/in.h newlib-psp/newlib/libc/sys/psp/netinet/in.h
--- newlib-1.15.0/newlib/libc/sys/psp/netinet/in.h 1970-01-01 01:00:00.000000000 +0100
+++ newlib-psp/newlib/libc/sys/psp/netinet/in.h 2007-03-10 18:02:39.000000000 +0100
@@ -0,0 +1,271 @@
+/* $NetBSD: in.h,v 1.71 2005/08/05 09:21:25 elad Exp $ */
+
+/*
+ * Copyright (c) 1982, 1986, 1990, 1993
+ * The Regents of the University of California. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * @(#)in.h 8.3 (Berkeley) 1/3/94
+ */
+
+/*
+ * Constants and structures defined by the internet system,
+ * Per RFC 790, September 1981, and numerous additions.
+ */
+
+#ifndef _NETINET_IN_H_
+#define _NETINET_IN_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <sys/socket.h>
+
+typedef uint32_t in_addr_t;
+typedef uint16_t in_port_t;
+
+/*
+ * Protocols
+ */
+#define IPPROTO_IP 0 /* dummy for IP */
+#define IPPROTO_HOPOPTS 0 /* IP6 hop-by-hop options */
+#define IPPROTO_ICMP 1 /* control message protocol */
+#define IPPROTO_IGMP 2 /* group mgmt protocol */
+#define IPPROTO_GGP 3 /* gateway^2 (deprecated) */
+#define IPPROTO_IPV4 4 /* IP header */
+#define IPPROTO_IPIP 4 /* IP inside IP */
+#define IPPROTO_TCP 6 /* tcp */
+#define IPPROTO_EGP 8 /* exterior gateway protocol */
+#define IPPROTO_PUP 12 /* pup */
+#define IPPROTO_UDP 17 /* user datagram protocol */
+#define IPPROTO_IDP 22 /* xns idp */
+#define IPPROTO_TP 29 /* tp-4 w/ class negotiation */
+#define IPPROTO_IPV6 41 /* IP6 header */
+#define IPPROTO_ROUTING 43 /* IP6 routing header */
+#define IPPROTO_FRAGMENT 44 /* IP6 fragmentation header */
+#define IPPROTO_RSVP 46 /* resource reservation */
+#define IPPROTO_GRE 47 /* GRE encaps RFC 1701 */
+#define IPPROTO_ESP 50 /* encap. security payload */
+#define IPPROTO_AH 51 /* authentication header */
+#define IPPROTO_MOBILE 55 /* IP Mobility RFC 2004 */
+#define IPPROTO_IPV6_ICMP 58 /* IPv6 ICMP */
+#define IPPROTO_ICMPV6 58 /* ICMP6 */
+#define IPPROTO_NONE 59 /* IP6 no next header */
+#define IPPROTO_DSTOPTS 60 /* IP6 destination option */
+#define IPPROTO_EON 80 /* ISO cnlp */
+#define IPPROTO_ETHERIP 97 /* Ethernet-in-IP */
+#define IPPROTO_ENCAP 98 /* encapsulation header */
+#define IPPROTO_PIM 103 /* Protocol indep. multicast */
+#define IPPROTO_IPCOMP 108 /* IP Payload Comp. Protocol */
+#define IPPROTO_VRRP 112 /* VRRP RFC 2338 */
+
+#define IPPROTO_RAW 255 /* raw IP packet */
+#define IPPROTO_MAX 256
+
+/* last return value of *_input(), meaning "all job for this pkt is done". */
+#define IPPROTO_DONE 257
+
+/* sysctl placeholder for (FAST_)IPSEC */
+#define CTL_IPPROTO_IPSEC 258
+
+
+/*
+ * Local port number conventions:
+ *
+ * Ports < IPPORT_RESERVED are reserved for privileged processes (e.g. root),
+ * unless a kernel is compiled with IPNOPRIVPORTS defined.
+ *
+ * When a user does a bind(2) or connect(2) with a port number of zero,
+ * a non-conflicting local port address is chosen.
+ *
+ * The default range is IPPORT_ANONMIN to IPPORT_ANONMAX, although
+ * that is settable by sysctl(3); net.inet.ip.anonportmin and
+ * net.inet.ip.anonportmax respectively.
+ *
+ * A user may set the IPPROTO_IP option IP_PORTRANGE to change this
+ * default assignment range.
+ *
+ * The value IP_PORTRANGE_DEFAULT causes the default behavior.
+ *
+ * The value IP_PORTRANGE_HIGH is the same as IP_PORTRANGE_DEFAULT,
+ * and exists only for FreeBSD compatibility purposes.
+ *
+ * The value IP_PORTRANGE_LOW changes the range to the "low" are
+ * that is (by convention) restricted to privileged processes.
+ * This convention is based on "vouchsafe" principles only.
+ * It is only secure if you trust the remote host to restrict these ports.
+ * The range is IPPORT_RESERVEDMIN to IPPORT_RESERVEDMAX.
+ */
+
+#define IPPORT_RESERVED 1024
+#define IPPORT_ANONMIN 49152
+#define IPPORT_ANONMAX 65535
+#define IPPORT_RESERVEDMIN 600
+#define IPPORT_RESERVEDMAX (IPPORT_RESERVED-1)
+
+/*
+ * Internet address (a structure for historical reasons)
+ */
+struct in_addr {
+ in_addr_t s_addr;
+} __attribute__((__packed__));
+
+#define __IPADDR(x) ((uint32_t)(x))
+
+#define IN_CLASSA(i) (((uint32_t)(i) & __IPADDR(0x80000000)) == \
+ __IPADDR(0x00000000))
+#define IN_CLASSA_NET __IPADDR(0xff000000)
+#define IN_CLASSA_NSHIFT 24
+#define IN_CLASSA_HOST __IPADDR(0x00ffffff)
+#define IN_CLASSA_MAX 128
+
+#define IN_CLASSB(i) (((uint32_t)(i) & __IPADDR(0xc0000000)) == \
+ __IPADDR(0x80000000))
+#define IN_CLASSB_NET __IPADDR(0xffff0000)
+#define IN_CLASSB_NSHIFT 16
+#define IN_CLASSB_HOST __IPADDR(0x0000ffff)
+#define IN_CLASSB_MAX 65536
+
+#define IN_CLASSC(i) (((uint32_t)(i) & __IPADDR(0xe0000000)) == \
+ __IPADDR(0xc0000000))
+#define IN_CLASSC_NET __IPADDR(0xffffff00)
+#define IN_CLASSC_NSHIFT 8
+#define IN_CLASSC_HOST __IPADDR(0x000000ff)
+
+#define IN_CLASSD(i) (((uint32_t)(i) & __IPADDR(0xf0000000)) == \
+ __IPADDR(0xe0000000))
+/* These ones aren't really net and host fields, but routing needn't know. */
+#define IN_CLASSD_NET __IPADDR(0xf0000000)
+#define IN_CLASSD_NSHIFT 28
+#define IN_CLASSD_HOST __IPADDR(0x0fffffff)
+#define IN_MULTICAST(i) IN_CLASSD(i)
+
+#define IN_EXPERIMENTAL(i) (((uint32_t)(i) & __IPADDR(0xf0000000)) == \
+ __IPADDR(0xf0000000))
+#define IN_BADCLASS(i) (((uint32_t)(i) & __IPADDR(0xf0000000)) == \
+ __IPADDR(0xf0000000))
+
+#define IN_LOCAL_GROUP(i) (((uint32_t)(i) & __IPADDR(0xffffff00)) == \
+ __IPADDR(0xe0000000))
+
+#define INADDR_ANY __IPADDR(0x00000000)
+#define INADDR_LOOPBACK __IPADDR(0x7f000001)
+#define INADDR_BROADCAST __IPADDR(0xffffffff) /* must be masked */
+
+#define INADDR_UNSPEC_GROUP __IPADDR(0xe0000000) /* 224.0.0.0 */
+#define INADDR_ALLHOSTS_GROUP __IPADDR(0xe0000001) /* 224.0.0.1 */
+#define INADDR_ALLRTRS_GROUP __IPADDR(0xe0000002) /* 224.0.0.2 */
+#define INADDR_MAX_LOCAL_GROUP __IPADDR(0xe00000ff) /* 224.0.0.255 */
+
+#define IN_LOOPBACKNET 127 /* official! */
+
+/*
+ * Socket address, internet style.
+ */
+struct sockaddr_in {
+ uint8_t sin_len;
+ sa_family_t sin_family;
+ in_port_t sin_port;
+ struct in_addr sin_addr;
+ int8_t sin_zero[8];
+};
+
+#define INET_ADDRSTRLEN 16
+
+/*
+ * Structure used to describe IP options.
+ * Used to store options internally, to pass them to a process,
+ * or to restore options retrieved earlier.
+ * The ip_dst is used for the first-hop gateway when using a source route
+ * (this gets put into the header proper).
+ */
+struct ip_opts {
+ struct in_addr ip_dst; /* first hop, 0 w/o src rt */
+#if defined(__cplusplus)
+ int8_t Ip_opts[40]; /* actually variable in size */
+#else
+ int8_t ip_opts[40]; /* actually variable in size */
+#endif
+};
+
+/*
+ * Options for use with [gs]etsockopt at the IP level.
+ * First word of comment is data type; bool is stored in int.
+ */
+#define IP_OPTIONS 1 /* buf/ip_opts; set/get IP options */
+#define IP_HDRINCL 2 /* int; header is included with data */
+#define IP_TOS 3 /* int; IP type of service and preced. */
+#define IP_TTL 4 /* int; IP time to live */
+#define IP_RECVOPTS 5 /* bool; receive all IP opts w/dgram */
+#define IP_RECVRETOPTS 6 /* bool; receive IP opts for response */
+#define IP_RECVDSTADDR 7 /* bool; receive IP dst addr w/dgram */
+#define IP_RETOPTS 8 /* ip_opts; set/get IP options */
+#define IP_MULTICAST_IF 9 /* in_addr; set/get IP multicast i/f */
+#define IP_MULTICAST_TTL 10 /* u_char; set/get IP multicast ttl */
+#define IP_MULTICAST_LOOP 11 /* u_char; set/get IP multicast loopback */
+#define IP_ADD_MEMBERSHIP 12 /* ip_mreq; add an IP group membership */
+#define IP_DROP_MEMBERSHIP 13 /* ip_mreq; drop an IP group membership */
+#define IP_PORTRANGE 19 /* int; range to use for ephemeral port */
+#define IP_RECVIF 20 /* bool; receive reception if w/dgram */
+#define IP_ERRORMTU 21 /* int; get MTU of last xmit = EMSGSIZE */
+#if 1 /*IPSEC*/
+#define IP_IPSEC_POLICY 22 /* struct; get/set security policy */
+#endif
+
+/*
+ * Defaults and limits for options
+ */
+#define IP_DEFAULT_MULTICAST_TTL 1 /* normally limit m'casts to 1 hop */
+#define IP_DEFAULT_MULTICAST_LOOP 1 /* normally hear sends if a member */
+#define IP_MAX_MEMBERSHIPS 20 /* per socket; must fit in one mbuf */
+
+/*
+ * Argument structure for IP_ADD_MEMBERSHIP and IP_DROP_MEMBERSHIP.
+ */
+struct ip_mreq {
+ struct in_addr imr_multiaddr; /* IP multicast address of group */
+ struct in_addr imr_interface; /* local IP address of interface */
+};
+
+/*
+ * Argument for IP_PORTRANGE:
+ * - which range to search when port is unspecified at bind() or connect()
+ */
+#define IP_PORTRANGE_DEFAULT 0 /* default range */
+#define IP_PORTRANGE_HIGH 1 /* same as DEFAULT (FreeBSD compat) */
+#define IP_PORTRANGE_LOW 2 /* use privileged range */
+
+#define ntohs(x) __builtin_allegrex_wsbh(x)
+#define ntohl(x) __builtin_allegrex_wsbw(x)
+#define htons(x) __builtin_allegrex_wsbh(x)
+#define htonl(x) __builtin_allegrex_wsbw(x)
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* !_NETINET_IN_H_ */
diff -burN newlib-1.15.0/newlib/libc/sys/psp/netinet/tcp.h newlib-psp/newlib/libc/sys/psp/netinet/tcp.h
--- newlib-1.15.0/newlib/libc/sys/psp/netinet/tcp.h 1970-01-01 01:00:00.000000000 +0100
+++ newlib-psp/newlib/libc/sys/psp/netinet/tcp.h 2007-03-10 18:02:39.000000000 +0100
@@ -0,0 +1,12 @@
+#ifndef __NETINET_TCP_H__
+#define __NETINET_TCP_H__
+
+#include <netinet/in.h>
+
+#define SOL_TCP IPPROTO_TCP
+
+/* Socket options */
+#define TCP_NODELAY 0x01 /* don't delay send to coalesce packets */
+#define TCP_MAXSEG 0x02 /* set maximum segment size */
+
+#endif
diff -burN newlib-1.15.0/newlib/libc/sys/psp/pipe.c newlib-psp/newlib/libc/sys/psp/pipe.c
--- newlib-1.15.0/newlib/libc/sys/psp/pipe.c 1970-01-01 01:00:00.000000000 +0100
+++ newlib-psp/newlib/libc/sys/psp/pipe.c 2007-03-10 18:02:39.000000000 +0100
@@ -0,0 +1,271 @@
+/*
+ * PSP Software Development Kit - http://www.pspdev.org
+ * -----------------------------------------------------------------------
+ * Licensed under the BSD license, see LICENSE in PSPSDK root for details.
+ *
+ * pipe.c - Socket wrappers to provide similar functions to normal unix
+ *
+ * Copyright (c) 2006 Rafael Cabezas <rafpsp@gmail.com>
+ *
+ */
+#include <stdio.h>
+#include <errno.h>
+#include <sys/syslimits.h>
+#include <sys/fd_set.h>
+
+#include <psptypes.h>
+#include <pspthreadman.h>
+#include <pspmodulemgr.h>
+#include <pspkerror.h>
+#include "fdman.h"
+
+/* Pipe functions */
+/* Returns how many bytes are in the pipe -- waiting to be read */
+size_t __psp_pipe_peekmsgsize(int fd)
+{
+ SceKernelMppInfo info;
+ info.size = sizeof(info);
+
+ if (!__PSP_IS_FD_OF_TYPE(fd, __PSP_DESCRIPTOR_TYPE_PIPE)) {
+ errno = EBADF;
+ return -1;
+ }
+
+ if (sceKernelReferMsgPipeStatus(__psp_descriptormap[fd]->sce_descriptor, &info) == 0) {
+ return (info.bufSize - info.freeSize);
+ }
+ else {
+ return -1;
+ }
+}
+
+int pipe(int fildes[2])
+{
+ static int iIndex = 0;
+ char name[32];
+ iIndex++;
+
+ sprintf(name, "__psp_pipe_%02d", iIndex);
+
+ SceUID uid = sceKernelCreateMsgPipe(name, PSP_MEMORY_PARTITION_USER, 0, (void *)PIPE_BUF, NULL);
+
+ if (uid >= 0) {
+ fildes[0] = __psp_fdman_get_new_descriptor();
+ if (fildes[0] != -1) {
+ __psp_descriptormap[fildes[0]]->sce_descriptor = uid;
+ __psp_descriptormap[fildes[0]]->type = __PSP_DESCRIPTOR_TYPE_PIPE;
+ }
+ else {
+ sceKernelDeleteMsgPipe(uid);
+ errno = EFAULT;
+ return -1;
+ }
+
+ fildes[1] = __psp_fdman_get_dup_descriptor(fildes[0]);
+ if (fildes[1] != -1) {
+ __psp_descriptormap[fildes[1]]->sce_descriptor = uid;
+ return 0;
+ }
+ else {
+ sceKernelDeleteMsgPipe(uid);
+ errno = EFAULT;
+ return -1;
+ }
+
+ }
+ else {
+ errno = EFAULT;
+ return -1;
+ }
+}
+
+int __psp_pipe_close(int fd)
+{
+ int ret = 0;
+
+ if (!__PSP_IS_FD_OF_TYPE(fd, __PSP_DESCRIPTOR_TYPE_PIPE)) {
+ errno = EBADF;
+ return -1;
+ }
+
+
+ if ( __psp_descriptormap[fd]->ref_count == 1 ) {
+ /**
+ * Delete a message pipe
+ *
+ * @param uid - The UID of the pipe
+ *
+ * @return 0 on success, < 0 on error
+ */
+ ret = sceKernelDeleteMsgPipe(__psp_descriptormap[fd]->sce_descriptor);
+ }
+
+ __psp_fdman_release_descriptor(fd);
+
+ if(ret < 0) {
+ return __psp_set_errno(ret);
+ }
+
+ return 0;
+}
+
+int __psp_pipe_nonblocking_read(int fd, void *buf, size_t len)
+{
+ int ret;
+ int sceuid;
+ int size;
+
+ if (!__PSP_IS_FD_OF_TYPE(fd, __PSP_DESCRIPTOR_TYPE_PIPE)) {
+ errno = EBADF;
+ return -1;
+ }
+
+ sceuid = __psp_descriptormap[fd]->sce_descriptor;
+
+ size = __psp_pipe_peekmsgsize(fd);
+ if (size > 0) {
+ if (size < len) {
+ len = size;
+ }
+ }
+ else {
+ errno = EBADF;
+ return -1;
+ }
+
+ /**
+ * Receive a message from a pipe
+ *
+ * @param uid - The UID of the pipe
+ * @param message - Pointer to the message
+ * @param size - Size of the message
+ * @param unk1 - Unknown
+ * @param unk2 - Unknown
+ * @param timeout - Timeout for receive
+ *
+ * @return 0 on success, < 0 on error
+ */
+ ret = sceKernelTryReceiveMsgPipe(sceuid, buf, len, 0, 0);
+
+ if (ret == 0) {/* Success - Data */
+ return len;
+ }
+ else if (ret == SCE_KERNEL_ERROR_MPP_EMPTY) {/* No data */
+ errno = EAGAIN;
+ return -1;
+ }
+ else {/* Error */
+ return __psp_set_errno(ret);
+ }
+}
+
+int __psp_pipe_read(int fd, void *buf, size_t len)
+{
+ int ret;
+ int sceuid;
+ int size;
+
+ if (!__PSP_IS_FD_OF_TYPE(fd, __PSP_DESCRIPTOR_TYPE_PIPE)) {
+ errno = EBADF;
+ return -1;
+ }
+
+ sceuid = __psp_descriptormap[fd]->sce_descriptor;
+
+ size = __psp_pipe_peekmsgsize(fd);
+ if (size > 0) {
+ if (size < len) {
+ len = size;
+ }
+ }
+ else {
+ errno = EBADF;
+ return -1;
+ }
+
+ /**
+ * Receive a message from a pipe
+ *
+ * @param uid - The UID of the pipe
+ * @param message - Pointer to the message
+ * @param size - Size of the message
+ * @param unk1 - Unknown
+ * @param unk2 - Unknown
+ * @param timeout - Timeout for receive
+ *
+ * @return 0 on success, < 0 on error
+ */
+ ret = sceKernelReceiveMsgPipe(sceuid, buf, len, 0, NULL, NULL);
+
+ if (ret == 0) {/* Success - Data */
+ return len;
+ }
+ else {/* Error */
+ return __psp_set_errno(ret);
+ }
+}
+
+int __psp_pipe_write(int fd, const void *buf, size_t len)
+{
+ int ret;
+ int sceuid;
+ char *cbuf;
+
+ if (!__PSP_IS_FD_OF_TYPE(fd, __PSP_DESCRIPTOR_TYPE_PIPE)) {
+ errno = EBADF;
+ return -1;
+ }
+
+ sceuid = __psp_descriptormap[fd]->sce_descriptor;
+
+ /**
+ * Send a message to a pipe
+ *
+ * @param uid - The UID of the pipe
+ * @param message - Pointer to the message
+ * @param size - Size of the message
+ * @param unk1 - Unknown
+ * @param unk2 - Unknown
+ * @param timeout - Timeout for send
+ *
+ * @return 0 on success, < 0 on error
+ */
+ cbuf = (char *)buf;
+ ret = sceKernelSendMsgPipe(sceuid, cbuf, len, 0, NULL, NULL);
+
+ if (ret == 0) {/* Success - Data */
+ return len;
+ }
+ else {/* Error */
+ return __psp_set_errno(ret);
+ }
+}
+
+int __psp_pipe_nonblocking_write(int fd, const void *buf, size_t len)
+{
+ int ret;
+ int sceuid;
+ char *cbuf;
+
+ if (!__PSP_IS_FD_OF_TYPE(fd, __PSP_DESCRIPTOR_TYPE_PIPE)) {
+ errno = EBADF;
+ return -1;
+ }
+
+ sceuid = __psp_descriptormap[fd]->sce_descriptor;
+
+ cbuf = (char *)buf;
+ ret = sceKernelTrySendMsgPipe(sceuid, cbuf, len, 0, 0);
+
+ if (ret == 0) {/* Success - Data */
+ return len;
+ }
+ else if (ret == SCE_KERNEL_ERROR_MPP_FULL) {
+ errno = EAGAIN;
+ return -1;
+ }
+ else {/* Error */
+ return __psp_set_errno(ret);
+ }
+}
+
diff -burN newlib-1.15.0/newlib/libc/sys/psp/pspcwd.c newlib-psp/newlib/libc/sys/psp/pspcwd.c
--- newlib-1.15.0/newlib/libc/sys/psp/pspcwd.c 1970-01-01 01:00:00.000000000 +0100
+++ newlib-psp/newlib/libc/sys/psp/pspcwd.c 2007-03-10 18:02:39.000000000 +0100
@@ -0,0 +1,166 @@
+/*
+ * PSP Software Development Kit - http://www.pspdev.org
+ * -----------------------------------------------------------------------
+ * Licensed under the BSD license, see LICENSE in PSPSDK root for details.
+ *
+ * pspcwd.c - Current working directory emulation helper functions
+ *
+ * Copyright (c) 2005 Marcus R. Brown <mrbrown@ocgnet.org>
+ * Copyright (c) 2005 James Forshaw <tyranid@gmail.com>
+ * Copyright (c) 2005 John Kelley <ps2dev@kelley.ca>
+ * Copyright (c) 2005 Jim Paris <jim@jtan.com>
+ *
+ */
+#include <string.h>
+#include <sys/types.h>
+#include <sys/unistd.h>
+
+#include <psptypes.h>
+#include <pspiofilemgr.h>
+
+char __psp_cwd[MAXPATHLEN + 1] = { 0 };
+
+/* Set the current working directory (CWD) to the path where the module was launched. */
+void __psp_init_cwd(char *argv_0)
+{
+ if (argv_0 != NULL) {
+ char base_path[MAXPATHLEN + 1];
+ char *end;
+
+ strncpy(base_path, argv_0, sizeof(base_path) - 1);
+ base_path[sizeof(base_path) - 1] = '\0';
+ end = strrchr(base_path, '/');
+ if (end != NULL) {
+ *(end + 1) = '\0';
+ chdir(base_path);
+ }
+ }
+}
+
+/* Return the number of bytes taken up by the "drive:" prefix,
+ or -1 if it's not found */
+int __psp_get_drive(const char *d)
+{
+ int i;
+ for(i=0; d[i]; i++) {
+ if(! ((d[i] >= 'a' && d[i] <= 'z') ||
+ (d[i] >= '0' && d[i] <= '9') ))
+ break;
+ }
+ if(d[i] == ':') return i+1;
+ return -1;
+}
+
+/* Like strcpy, but returns 0 if the string doesn't fit */
+int __psp_safe_strcpy(char *out, const char *in, int maxlen)
+{
+ for( ; maxlen > 0 && *in ; maxlen-- )
+ *(out++) = *(in++);
+ if(maxlen < 1) return 0;
+ *out = 0;
+ return 1;
+}
+
+/* Like strcat, but returns 0 if the string doesn't fit */
+int __psp_safe_strcat(char *out, const char *in, int maxlen)
+{
+ for( ; *out ; out++,maxlen-- )
+ continue;
+ return __psp_safe_strcpy(out, in, maxlen);
+}
+
+/* Normalize a pathname (without leading "drive:") by removing
+ . and .. components, duplicated /, etc. */
+int __psp_path_normalize(char *out, int len)
+{
+ int i, j;
+ int first, next;
+
+ /* First append "/" to make the rest easier */
+ if(!__psp_safe_strcat(out,"/",len)) return -10;
+
+ /* Convert "//" to "/" */
+ for(i=0; out[i+1]; i++) {
+ if(out[i]=='/' && out[i+1]=='/') {
+ for(j=i+1; out[j]; j++)
+ out[j] = out[j+1];
+ i--;
+ }
+ }
+
+ /* Convert "/./" to "/" */
+ for(i=0; out[i] && out[i+1] && out[i+2]; i++) {
+ if(out[i]=='/' && out[i+1]=='.' && out[i+2]=='/') {
+ for(j=i+1; out[j]; j++)
+ out[j] = out[j+2];
+ i--;
+ }
+ }
+
+ /* Convert "/asdf/../" to "/" until we can't anymore. Also
+ * convert leading "/../" to "/" */
+ first = next = 0;
+ while(1) {
+ /* If a "../" follows, remove it and the parent */
+ if(out[next+1] && out[next+1]=='.' &&
+ out[next+2] && out[next+2]=='.' &&
+ out[next+3] && out[next+3]=='/') {
+ for(j=0; out[first+j+1]; j++)
+ out[first+j+1] = out[next+j+4];
+ first = next = 0;
+ continue;
+ }
+
+ /* Find next slash */
+ first = next;
+ for(next=first+1; out[next] && out[next] != '/'; next++)
+ continue;
+ if(!out[next]) break;
+ }
+
+ /* Remove trailing "/" */
+ for(i=1; out[i]; i++)
+ continue;
+ if(i >= 1 && out[i-1] == '/')
+ out[i-1] = 0;
+
+ return 0;
+}
+
+/* Convert relative path to absolute path. */
+int __psp_path_absolute(const char *in, char *out, int len)
+{
+ int dr;
+
+ /* See what the relative URL starts with */
+ dr = __psp_get_drive(in);
+ if(dr > 0 && in[dr] == '/') {
+ /* It starts with "drive:/", so it's already absolute */
+ if(!__psp_safe_strcpy(out, in, len))
+ return -1;
+ } else if(in[0] == '/') {
+ /* It's absolute, but missing the drive, so use cwd's drive */
+ if(strlen(__psp_cwd) >= len)
+ return -2;
+ strcpy(out, __psp_cwd);
+ dr = __psp_get_drive(out);
+ out[dr] = 0;
+ if(!__psp_safe_strcat(out, in, len))
+ return -3;
+ } else {
+ /* It's not absolute, so append it to the current cwd */
+ if(strlen(__psp_cwd) >= len)
+ return -4;
+ strcpy(out, __psp_cwd);
+ if(!__psp_safe_strcat(out, "/", len))
+ return -6;
+ if(!__psp_safe_strcat(out, in, len))
+ return -7;
+ }
+
+ /* Now normalize the pathname portion */
+ dr = __psp_get_drive(out);
+ if(dr < 0) dr = 0;
+ return __psp_path_normalize(out + dr, len - dr);
+}
+
diff -burN newlib-1.15.0/newlib/libc/sys/psp/select.c newlib-psp/newlib/libc/sys/psp/select.c
--- newlib-1.15.0/newlib/libc/sys/psp/select.c 1970-01-01 01:00:00.000000000 +0100
+++ newlib-psp/newlib/libc/sys/psp/select.c 2007-03-10 18:02:39.000000000 +0100
@@ -0,0 +1,172 @@
+/*
+ * PSP Software Development Kit - http://www.pspdev.org
+ * -----------------------------------------------------------------------
+ * Licensed under the BSD license, see LICENSE in PSPSDK root for details.
+ *
+ * select.c - Socket wrappers to provide similar functions to normal unix
+ *
+ * Copyright (c) 2006 Rafael Cabezas <rafpsp@gmail.com>
+ *
+ */
+#include <fcntl.h>
+#include <errno.h>
+#include <sys/select.h>
+#include <psptypes.h>
+#include <pspthreadman.h>
+
+#include "fdman.h"
+
+#define SELECT_POLLING_DELAY_IN_us 100
+
+static int __psp_poll_select(int n, fd_set *readfds, fd_set *writefds, fd_set *exceptfds);
+
+int select(int n, fd_set *readfds, fd_set *writefds,
+ fd_set *exceptfds, struct timeval *timeout)
+{
+ int count;
+ clock_t start_time, time;
+
+ start_time = clock();
+
+ count = 0;
+
+ if (timeout) {
+ time = (timeout->tv_sec * CLOCKS_PER_SEC) + (timeout->tv_usec * (1*1000*1000/CLOCKS_PER_SEC));
+ }
+ else {
+ time = 0;
+ }
+
+ for (;;) {
+ count = __psp_poll_select(n, readfds, writefds, exceptfds);
+ /* If timeout == NULL, then don't timeout! */
+ if ( (count > 0) || ((timeout != NULL) && ((clock() - start_time) >= time)) ) {
+ break;
+ }
+ else {
+ /* Nothing found, and not timed-out yet; let's yield for SELECT_POLLING_DELAY_IN_us, so we're not in a busy loop */
+ sceKernelDelayThread(SELECT_POLLING_DELAY_IN_us);
+ }
+ }
+
+ return count;
+}
+
+#define SCE_FD_SET(n, p) \
+ ((p)->fds_bits[((n) & 0xFF) /__NFDBITS] |= (1 << ((n) % __NFDBITS)))
+
+static int __psp_poll_select(int n, fd_set *readfds, fd_set *writefds, fd_set *exceptfds)
+{
+ int fd, count;
+ fd_set ready_readfds, ready_writefds, ready_exceptfds;
+ fd_set scereadfds, scewritefds, sceexceptfds;
+ SceKernelMppInfo info;
+ struct timeval scetv;
+
+ FD_ZERO(&ready_readfds);
+ FD_ZERO(&ready_writefds);
+ FD_ZERO(&ready_exceptfds);
+
+ info.size = sizeof(info);
+ scetv.tv_sec = 0;
+ scetv.tv_usec = 0;
+ count = 0;
+
+ for (fd = 0; fd < n; fd++)
+ {
+ if (__psp_descriptormap[fd] != NULL) {
+ switch(__psp_descriptormap[fd]->type)
+ {
+ case __PSP_DESCRIPTOR_TYPE_PIPE:
+ if (readfds && FD_ISSET(fd, readfds)) {
+ if (sceKernelReferMsgPipeStatus(__psp_descriptormap[fd]->sce_descriptor, &info) == 0) {
+ if (info.bufSize != info.freeSize) {
+ FD_SET(fd, &ready_readfds);
+ count++;
+ }
+ }
+ else {
+ FD_SET(fd, &ready_exceptfds);
+ count++;
+ }
+ }
+ if (writefds && FD_ISSET(fd, writefds)) {
+ if (sceKernelReferMsgPipeStatus(__psp_descriptormap[fd]->sce_descriptor, &info) == 0) {
+ if (info.freeSize > 0) {
+ FD_SET(fd, &ready_writefds);
+ count++;
+ }
+ }
+ else {
+ FD_SET(fd, &ready_exceptfds);
+ count++;
+ }
+ }
+ break;
+ case __PSP_DESCRIPTOR_TYPE_FILE:
+ if (readfds && FD_ISSET(fd, readfds)) {
+ if (readfds && FD_ISSET(fd, readfds)) {
+ /** Just set it for now */
+ FD_SET(fd, &ready_readfds);
+ count++;
+ }
+ }
+ break;
+ case __PSP_DESCRIPTOR_TYPE_SOCKET:
+ if (readfds && FD_ISSET(fd, readfds)) {
+ int sce_ret, sce_fd;
+ sce_fd = __psp_descriptormap[fd]->sce_descriptor;
+ FD_ZERO(&scereadfds);
+ SCE_FD_SET(sce_fd, &scereadfds);
+ errno = 0;
+ sce_ret = sceNetInetSelect (sce_fd+1, &scereadfds, NULL, NULL, &scetv);
+ if (sce_ret>0) {
+ FD_SET(fd, &ready_readfds);
+ count++;
+ }
+ else if (sce_ret == -1) {
+ errno = sceNetInetGetErrno();
+ if (exceptfds && FD_ISSET(fd, exceptfds)) {
+ FD_SET(fd, &ready_exceptfds);
+ count++;
+ } else {
+ count = -1;
+ }
+ }
+ }
+ if (writefds && FD_ISSET(fd, writefds)) {
+ int sce_ret;
+ FD_ZERO(&scewritefds);
+ SCE_FD_SET(__psp_descriptormap[fd]->sce_descriptor, &scewritefds);
+ sce_ret = sceNetInetSelect (__psp_descriptormap[fd]->sce_descriptor+1, NULL, &scewritefds, NULL, &scetv);
+ if (sce_ret>0) {
+ FD_SET(fd, &ready_writefds);
+ count++;
+ }
+ else if (sce_ret == -1) {
+ if (exceptfds && FD_ISSET(fd, exceptfds)) {
+ FD_SET(fd, &ready_exceptfds);
+ count++;
+ }
+ else {
+ count = -1;
+ }
+ }
+ }
+ break;
+ }
+ }
+ }
+
+ if (count > 0) {
+ if (readfds)
+ *readfds = ready_readfds;
+ if (writefds)
+ *writefds = ready_writefds;
+ if (exceptfds)
+ *exceptfds = ready_exceptfds;
+ }
+
+ return count;
+}
+
diff -burN newlib-1.15.0/newlib/libc/sys/psp/socket.c newlib-psp/newlib/libc/sys/psp/socket.c
--- newlib-1.15.0/newlib/libc/sys/psp/socket.c 1970-01-01 01:00:00.000000000 +0100
+++ newlib-psp/newlib/libc/sys/psp/socket.c 2007-03-10 18:02:39.000000000 +0100
@@ -0,0 +1,390 @@
+/*
+ * PSP Software Development Kit - http://www.pspdev.org
+ * -----------------------------------------------------------------------
+ * Licensed under the BSD license, see LICENSE in PSPSDK root for details.
+ *
+ * socket.c - Socket wrappers to provide similar functions to normal unix
+ *
+ * Copyright (c) 2005 Marcus R. Brown <mrbrown@ocgnet.org>
+ * Copyright (c) 2005 James Forshaw <tyranid@gmail.com>
+ *
+ */
+#include <fcntl.h>
+#include <errno.h>
+#include <sys/socket.h>
+#include <sys/select.h>
+#include <netinet/in.h>
+#include <arpa/inet.h>
+
+#include <psptypes.h>
+#include "fdman.h"
+
+#ifdef F_socket
+int socket(int domain, int type, int protocol)
+{
+ int sock, scesock;
+ int i;
+
+ scesock = sceNetInetSocket(domain, type, protocol);
+ if(scesock < 0) {
+ errno = sceNetInetGetErrno();
+ return -1;
+ }
+
+ sock = __psp_fdman_get_new_descriptor();
+ if( sock != -1 ) {
+ __psp_descriptormap[sock]->sce_descriptor = scesock;
+ __psp_descriptormap[sock]->type = __PSP_DESCRIPTOR_TYPE_SOCKET;
+ }
+ else {
+ sceNetInetClose(scesock);
+ errno = ENOENT;
+ return -1;
+ }
+
+ return sock;
+}
+
+/* These are glue routines that are called from _close(), _read(), and
+ _write(). They are here so that any program that uses socket() will pull
+ them in and have expanded socket capability. */
+
+int __psp_socket_close(int sock)
+{
+ int ret = 0;
+
+ if (__psp_descriptormap[sock]->ref_count == 1) {
+ ret = sceNetInetClose(__psp_descriptormap[sock]->sce_descriptor);
+ }
+
+ __psp_fdman_release_descriptor(sock);
+
+ if(ret < 0)
+ {
+ /* If close is defined likely errno is */
+ errno = sceNetInetGetErrno();
+ return -1;
+ }
+
+ return 0;
+}
+
+ssize_t __psp_socket_recv(int s, void *buf, size_t len, int flags)
+{
+ return recv(s, buf, len, flags);
+}
+
+ssize_t __psp_socket_send(int s, const void *buf, size_t len, int flags)
+{
+ return send(s, buf, len, flags);
+}
+#endif
+
+#ifdef F_accept
+int accept(int s, struct sockaddr *addr, socklen_t *addrlen)
+{
+ int newscesock, newsock;
+
+ if (!__PSP_IS_FD_OF_TYPE(s, __PSP_DESCRIPTOR_TYPE_SOCKET)) {
+ errno = EBADF;
+ return -1;
+ }
+
+ newscesock = sceNetInetAccept(__psp_descriptormap[s]->sce_descriptor, addr, addrlen);
+ if( (newscesock >= 0) ) {
+ newsock = __psp_fdman_get_new_descriptor();
+ if ( newsock != -1 ) {
+ __psp_descriptormap[newsock]->sce_descriptor = newscesock;
+ __psp_descriptormap[newsock]->type = __PSP_DESCRIPTOR_TYPE_SOCKET;
+ }
+ else {
+ sceNetInetClose(newscesock);
+ errno = ENOENT;
+ return -1;
+ }
+ }
+ else {
+ errno = ENOENT;
+ return -1;
+ }
+
+ return newsock;
+}
+#endif
+
+#ifdef F_bind
+int bind(int s, const struct sockaddr *my_addr, socklen_t addrlen)
+{
+ int ret;
+
+ if (!__PSP_IS_FD_OF_TYPE(s, __PSP_DESCRIPTOR_TYPE_SOCKET)) {
+ errno = EBADF;
+ return -1;
+ }
+
+ ret = sceNetInetBind(__psp_descriptormap[s]->sce_descriptor, my_addr, addrlen);
+ if(ret < 0)
+ {
+ errno = sceNetInetGetErrno();
+ return -1;
+ }
+
+ return 0;
+}
+#endif
+
+#ifdef F_connect
+int connect(int s, const struct sockaddr *serv_addr, socklen_t addrlen)
+{
+ int ret;
+
+ if (!__PSP_IS_FD_OF_TYPE(s, __PSP_DESCRIPTOR_TYPE_SOCKET)) {
+ errno = EBADF;
+ return -1;
+ }
+
+ ret = sceNetInetConnect(__psp_descriptormap[s]->sce_descriptor, serv_addr, addrlen);
+ if(ret < 0)
+ {
+ errno = sceNetInetGetErrno();
+ return -1;
+ }
+
+ return 0;
+}
+#endif
+
+#ifdef F_setsockopt
+int getsockopt(int s, int level, int optname, void *optval, socklen_t *optlen)
+{
+ int ret;
+
+ if (!__PSP_IS_FD_OF_TYPE(s, __PSP_DESCRIPTOR_TYPE_SOCKET)) {
+ errno = EBADF;
+ return -1;
+ }
+
+ ret = sceNetInetGetsockopt(__psp_descriptormap[s]->sce_descriptor, level, optname, optval, optlen);
+ if(ret < 0)
+ {
+ errno = sceNetInetGetErrno();
+ return -1;
+ }
+
+ return 0;
+}
+#endif
+
+#ifdef F_listen
+int listen(int s, int backlog)
+{
+ int ret;
+
+ if (!__PSP_IS_FD_OF_TYPE(s, __PSP_DESCRIPTOR_TYPE_SOCKET)) {
+ errno = EBADF;
+ return -1;
+ }
+
+ ret = sceNetInetListen(__psp_descriptormap[s]->sce_descriptor, backlog);
+ if(ret < 0)
+ {
+ errno = sceNetInetGetErrno();
+ return -1;
+ }
+
+ return 0;
+}
+#endif
+
+#ifdef F_recv
+ssize_t recv(int s, void *buf, size_t len, int flags)
+{
+ int ret;
+
+ if (!__PSP_IS_FD_OF_TYPE(s, __PSP_DESCRIPTOR_TYPE_SOCKET)) {
+ errno = EBADF;
+ return -1;
+ }
+
+ ret = sceNetInetRecv(__psp_descriptormap[s]->sce_descriptor, buf, len, flags);
+ if(ret < 0)
+ {
+ errno = sceNetInetGetErrno();
+ return -1;
+ }
+
+ return ret;
+}
+#endif
+
+#ifdef F_recvfrom
+ssize_t recvfrom(int s, void *buf, size_t len, int flags, struct sockaddr *from, socklen_t *fromlen)
+{
+ int ret;
+
+ if (!__PSP_IS_FD_OF_TYPE(s, __PSP_DESCRIPTOR_TYPE_SOCKET)) {
+ errno = EBADF;
+ return -1;
+ }
+
+ ret = sceNetInetRecvfrom(__psp_descriptormap[s]->sce_descriptor, buf, len, flags, from, fromlen);
+ if(ret < 0)
+ {
+ errno = sceNetInetGetErrno();
+ return -1;
+ }
+
+ return ret;
+}
+#endif
+
+#ifdef F_send
+ssize_t send(int s, const void *buf, size_t len, int flags)
+{
+ int ret;
+
+ if (!__PSP_IS_FD_OF_TYPE(s, __PSP_DESCRIPTOR_TYPE_SOCKET)) {
+ errno = EBADF;
+ return -1;
+ }
+
+ ret = sceNetInetSend(__psp_descriptormap[s]->sce_descriptor, buf, len, flags);
+ if(ret < 0)
+ {
+ errno = sceNetInetGetErrno();
+ return -1;
+ }
+
+ return ret;
+}
+#endif
+
+#ifdef F_sendto
+ssize_t sendto(int s, const void *buf, size_t len, int flags, const struct sockaddr *to, socklen_t tolen)
+{
+ int ret;
+
+ if (!__PSP_IS_FD_OF_TYPE(s, __PSP_DESCRIPTOR_TYPE_SOCKET)) {
+ errno = EBADF;
+ return -1;
+ }
+
+ ret = sceNetInetSendto(__psp_descriptormap[s]->sce_descriptor, buf, len, flags, to, tolen);
+ if(ret < 0)
+ {
+ errno = sceNetInetGetErrno();
+ return -1;
+ }
+
+ return ret;
+}
+#endif
+
+#ifdef F_setsockopt
+int setsockopt(int s, int level, int optname, const void *optval, socklen_t optlen)
+{
+ int ret;
+
+ if (!__PSP_IS_FD_OF_TYPE(s, __PSP_DESCRIPTOR_TYPE_SOCKET)) {
+ errno = EBADF;
+ return -1;
+ }
+
+ ret = sceNetInetSetsockopt(__psp_descriptormap[s]->sce_descriptor, level, optname, optval, optlen);
+ if(ret < 0)
+ {
+ errno = sceNetInetGetErrno();
+ return -1;
+ }
+ else
+ {
+ if ( (level == SOL_SOCKET) && (optname == SO_NONBLOCK) ) {
+ if (*((int*)optval) == 1) {
+ __psp_descriptormap[s]->flags |= O_NONBLOCK;
+ }
+ else {
+ __psp_descriptormap[s]->flags &= ~O_NONBLOCK;
+ }
+ }
+ }
+
+ return 0;
+}
+#endif
+
+#ifdef F_shutdown
+int shutdown(int s, int how)
+{
+ int ret;
+
+ if (!__PSP_IS_FD_OF_TYPE(s, __PSP_DESCRIPTOR_TYPE_SOCKET)) {
+ errno = EBADF;
+ return -1;
+ }
+
+ ret = sceNetInetShutdown(__psp_descriptormap[s]->sce_descriptor, how);
+ if(ret < 0)
+ {
+ errno = sceNetInetGetErrno();
+ return -1;
+ }
+
+ return 0;
+}
+#endif
+
+#ifdef F_getpeername
+int getpeername(int s, struct sockaddr *name, socklen_t *namelen)
+{
+ int ret;
+
+ if (!__PSP_IS_FD_OF_TYPE(s, __PSP_DESCRIPTOR_TYPE_SOCKET)) {
+ errno = EBADF;
+ return -1;
+ }
+
+ ret = sceNetInetGetpeername(__psp_descriptormap[s]->sce_descriptor, name, namelen);
+ if(ret < 0)
+ {
+ errno = sceNetInetGetErrno();
+ return -1;
+ }
+
+ return 0;
+}
+#endif
+
+#ifdef F_getsockname
+int getsockname(int s, struct sockaddr *name, socklen_t *namelen)
+{
+ int ret;
+
+ if (!__PSP_IS_FD_OF_TYPE(s, __PSP_DESCRIPTOR_TYPE_SOCKET)) {
+ errno = EBADF;
+ return -1;
+ }
+
+ ret = sceNetInetGetsockname(__psp_descriptormap[s]->sce_descriptor, name, namelen);
+ if(ret < 0)
+ {
+ errno = sceNetInetGetErrno();
+ return -1;
+ }
+
+ return 0;
+}
+#endif
+
+#ifdef F_inet_ntoa
+char *inet_ntoa(struct in_addr in)
+{
+ static char ip_addr[INET_ADDRSTRLEN+1];
+
+ if(sceNetInetInetNtop(AF_INET, &in, ip_addr, INET_ADDRSTRLEN) == NULL)
+ {
+ strcpy(ip_addr, "Invalid");
+ }
+
+ return ip_addr;
+}
+#endif
diff -burN newlib-1.15.0/newlib/libc/sys/psp/sys/dirent.h newlib-psp/newlib/libc/sys/psp/sys/dirent.h
--- newlib-1.15.0/newlib/libc/sys/psp/sys/dirent.h 1970-01-01 01:00:00.000000000 +0100
+++ newlib-psp/newlib/libc/sys/psp/sys/dirent.h 2007-03-10 18:02:39.000000000 +0100
@@ -0,0 +1,39 @@
+#ifndef _SYS_DIRENT_H
+#define _SYS_DIRENT_H
+
+/* PSP dirent.h, based on pspiofilemgr_dirent.h
+ by Jim Paris <jim@jtan.com> */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <pspiofilemgr_dirent.h>
+
+#define MAXNAMLEN 255
+
+/* Same as SceIoDirent, just with a different name. */
+struct dirent {
+ /** File status. */
+ SceIoStat d_stat;
+ /** File name. */
+ char d_name[256];
+ /** Device-specific data. */
+ void * d_private;
+ int dummy;
+};
+
+typedef struct {
+ SceUID uid;
+ struct dirent de;
+} DIR;
+
+DIR *opendir (const char *);
+struct dirent *readdir (DIR *);
+int closedir (DIR *);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff -burN newlib-1.15.0/newlib/libc/sys/psp/sys/errno.h newlib-psp/newlib/libc/sys/psp/sys/errno.h
--- newlib-1.15.0/newlib/libc/sys/psp/sys/errno.h 1970-01-01 01:00:00.000000000 +0100
+++ newlib-psp/newlib/libc/sys/psp/sys/errno.h 2007-03-10 18:02:39.000000000 +0100
@@ -0,0 +1,158 @@
+/* errno.h for PSP, based on newlib/libc/include/sys/errno.h. */
+
+#ifndef _SYS_ERRNO_H_
+#ifdef __cplusplus
+extern "C" {
+#endif
+#define _SYS_ERRNO_H_
+
+#include <sys/reent.h>
+
+#ifndef _REENT_ONLY
+#define errno (*__errno())
+extern int *__errno _PARAMS ((void));
+#endif
+
+/* Please don't use these variables directly.
+ Use strerror instead. */
+extern __IMPORT _CONST char * _CONST _sys_errlist[];
+extern __IMPORT int _sys_nerr;
+#ifdef __CYGWIN__
+extern __IMPORT const char * const sys_errlist[];
+extern __IMPORT int sys_nerr;
+#endif
+
+#define __errno_r(ptr) ((ptr)->_errno)
+
+#define EPERM 1 /* Not super-user */
+#define ENOENT 2 /* No such file or directory */
+#define ESRCH 3 /* No such process */
+#define EINTR 4 /* Interrupted system call */
+#define EIO 5 /* I/O error */
+#define ENXIO 6 /* No such device or address */
+#define E2BIG 7 /* Arg list too long */
+#define ENOEXEC 8 /* Exec format error */
+#define EBADF 9 /* Bad file number */
+#define ECHILD 10 /* No children */
+#define EAGAIN 11 /* No more processes */
+#define ENOMEM 12 /* Not enough core */
+#define EACCES 13 /* Permission denied */
+#define EFAULT 14 /* Bad address */
+#define ENOTBLK 15 /* Block device required */
+#define EBUSY 16 /* Mount device busy */
+#define EEXIST 17 /* File exists */
+#define EXDEV 18 /* Cross-device link */
+#define ENODEV 19 /* No such device */
+#define ENOTDIR 20 /* Not a directory */
+#define EISDIR 21 /* Is a directory */
+#define EINVAL 22 /* Invalid argument */
+#define ENFILE 23 /* Too many open files in system */
+#define EMFILE 24 /* Too many open files */
+#define ENOTTY 25 /* Not a typewriter */
+#define ETXTBSY 26 /* Text file busy */
+#define EFBIG 27 /* File too large */
+#define ENOSPC 28 /* No space left on device */
+#define ESPIPE 29 /* Illegal seek */
+#define EROFS 30 /* Read only file system */
+#define EMLINK 31 /* Too many links */
+#define EPIPE 32 /* Broken pipe */
+#define EDOM 33 /* Math arg out of domain of func */
+#define ERANGE 34 /* Math result not representable */
+#define ENOMSG 35 /* No message of desired type */
+#define EIDRM 36 /* Identifier removed */
+#define ECHRNG 37 /* Channel number out of range */
+#define EL2NSYNC 38 /* Level 2 not synchronized */
+#define EL3HLT 39 /* Level 3 halted */
+#define EL3RST 40 /* Level 3 reset */
+#define ELNRNG 41 /* Link number out of range */
+#define EUNATCH 42 /* Protocol driver not attached */
+#define ENOCSI 43 /* No CSI structure available */
+#define EL2HLT 44 /* Level 2 halted */
+#define EDEADLK 45 /* Deadlock condition */
+#define ENOLCK 46 /* No record locks available */
+#define EBADE 50 /* Invalid exchange */
+#define EBADR 51 /* Invalid request descriptor */
+#define EXFULL 52 /* Exchange full */
+#define ENOANO 53 /* No anode */
+#define EBADRQC 54 /* Invalid request code */
+#define EBADSLT 55 /* Invalid slot */
+#define EDEADLOCK 56 /* File locking deadlock error */
+#define EBFONT 57 /* Bad font file fmt */
+#define ENOSTR 60 /* Device not a stream */
+#define ENODATA 61 /* No data (for no delay io) */
+#define ETIME 62 /* Timer expired */
+#define ENOSR 63 /* Out of streams resources */
+#define ENONET 64 /* Machine is not on the network */
+#define ENOPKG 65 /* Package not installed */
+#define EREMOTE 66 /* The object is remote */
+#define ENOLINK 67 /* The link has been severed */
+#define EADV 68 /* Advertise error */
+#define ESRMNT 69 /* Srmount error */
+#define ECOMM 70 /* Communication error on send */
+#define EPROTO 71 /* Protocol error */
+#define EMULTIHOP 74 /* Multihop attempted */
+#define ELBIN 75 /* Inode is remote (not really error) */
+#define EDOTDOT 76 /* Cross mount point (not really error) */
+#define EBADMSG 77 /* Trying to read unreadable message */
+#define EFTYPE 79 /* Inappropriate file type or format */
+#define ENOTUNIQ 80 /* Given log. name not unique */
+#define EBADFD 81 /* f.d. invalid for this operation */
+#define EREMCHG 82 /* Remote address changed */
+#define ELIBACC 83 /* Can't access a needed shared lib */
+#define ELIBBAD 84 /* Accessing a corrupted shared lib */
+#define ELIBSCN 85 /* .lib section in a.out corrupted */
+#define ELIBMAX 86 /* Attempting to link in too many libs */
+#define ELIBEXEC 87 /* Attempting to exec a shared library */
+#define ENOSYS 88 /* Function not implemented */
+#define ENMFILE 89 /* No more files */
+#define ENOTEMPTY 90 /* Directory not empty */
+#define ENAMETOOLONG 91 /* File or path name too long */
+#define ELOOP 92 /* Too many symbolic links */
+#define EOPNOTSUPP 95 /* Operation not supported on transport endpoint */
+#define EPFNOSUPPORT 96 /* Protocol family not supported */
+#define ECONNRESET 104 /* Connection reset by peer */
+#define ENOBUFS 105 /* No buffer space available */
+#define EAFNOSUPPORT 106 /* Address family not supported by protocol family */
+#define EPROTOTYPE 107 /* Protocol wrong type for socket */
+#define ENOTSOCK 108 /* Socket operation on non-socket */
+#define ENOPROTOOPT 109 /* Protocol not available */
+#define ESHUTDOWN 110 /* Can't send after socket shutdown */
+#define ECONNREFUSED 111 /* Connection refused */
+#define EADDRINUSE 112 /* Address already in use */
+#define ECONNABORTED 113 /* Connection aborted */
+#define ENETUNREACH 114 /* Network is unreachable */
+#define ENETDOWN 115 /* Network interface is not configured */
+#define ETIMEDOUT 116 /* Connection timed out */
+#define EHOSTDOWN 117 /* Host is down */
+#define EHOSTUNREACH 118 /* Host is unreachable */
+#define EINPROGRESS 119 /* Connection already in progress */
+#define EALREADY 120 /* Socket already connected */
+#define EDESTADDRREQ 121 /* Destination address required */
+#define EMSGSIZE 122 /* Message too long */
+#define EPROTONOSUPPORT 123 /* Unknown protocol */
+#define ESOCKTNOSUPPORT 124 /* Socket type not supported */
+#define EADDRNOTAVAIL 125 /* Address not available */
+#define ENETRESET 126
+#define EISCONN 127 /* Socket is already connected */
+#define ENOTCONN 128 /* Socket is not connected */
+#define ETOOMANYREFS 129
+#define EPROCLIM 130
+#define EUSERS 131
+#define EDQUOT 132
+#define ESTALE 133
+#define ENOTSUP 134 /* Not supported */
+#define ENOMEDIUM 135 /* No medium (in tape drive) */
+#define ENOSHARE 136 /* No such host or network path */
+#define ECASECLASH 137 /* Filename exists with different case */
+#define EILSEQ 138
+#define EOVERFLOW 139 /* Value too large for defined data type */
+
+/* From cygwin32. */
+#define EWOULDBLOCK EAGAIN /* Operation would block */
+
+#define __ELASTERROR 2000 /* Users can add values starting here */
+
+#ifdef __cplusplus
+}
+#endif
+#endif /* _SYS_ERRNO_H */
diff -burN newlib-1.15.0/newlib/libc/sys/psp/sys/fd_set.h newlib-psp/newlib/libc/sys/psp/sys/fd_set.h
--- newlib-1.15.0/newlib/libc/sys/psp/sys/fd_set.h 1970-01-01 01:00:00.000000000 +0100
+++ newlib-psp/newlib/libc/sys/psp/sys/fd_set.h 2007-03-10 18:02:39.000000000 +0100
@@ -0,0 +1,69 @@
+/* $NetBSD: fd_set.h,v 1.1 2005/05/22 12:44:24 kleink Exp $ */
+
+/*-
+ * Copyright (c) 1992, 1993
+ * The Regents of the University of California. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * from: @(#)types.h 8.4 (Berkeley) 1/21/94
+ */
+
+#ifndef _SYS_FD_SET_H_
+#define _SYS_FD_SET_H_
+
+#include <sys/socket.h>
+#include <stdint.h>
+
+/*
+ * Implementation dependent defines, hidden from user space. X/Open does not
+ * specify them.
+ */
+#define __NBBY 8 /* number of bits in a byte */
+typedef uint32_t __fd_mask;
+
+/* bits per mask */
+#define __NFDBITS ((unsigned int)sizeof(__fd_mask) * __NBBY)
+
+#define __howmany(x, y) (((x) + ((y) - 1)) / (y))
+
+#define FD_SETSIZE 256
+
+typedef struct fd_set {
+ __fd_mask fds_bits[__howmany(FD_SETSIZE, __NFDBITS)];
+} fd_set;
+
+#define FD_SET(n, p) \
+ ((p)->fds_bits[(n) /__NFDBITS] |= (1 << ((n) % __NFDBITS)))
+
+#define FD_CLR(n, p) \
+ ((p)->fds_bits[(n) /__NFDBITS] &= ~(1 << ((n) % __NFDBITS)))
+
+#define FD_ISSET(n, p) \
+ ((p)->fds_bits[(n) /__NFDBITS] & (1 << ((n) % __NFDBITS)))
+
+#define FD_ZERO(p) (void)__builtin_memset((p), 0, sizeof(*(p)))
+
+#endif /* _SYS_FD_SET_H_ */
diff -burN newlib-1.15.0/newlib/libc/sys/psp/sys/ioctl.h newlib-psp/newlib/libc/sys/psp/sys/ioctl.h
--- newlib-1.15.0/newlib/libc/sys/psp/sys/ioctl.h 1970-01-01 01:00:00.000000000 +0100
+++ newlib-psp/newlib/libc/sys/psp/sys/ioctl.h 2007-03-10 18:02:39.000000000 +0100
@@ -0,0 +1 @@
+/* Empty file, here for compatibility */
diff -burN newlib-1.15.0/newlib/libc/sys/psp/sys/select.h newlib-psp/newlib/libc/sys/psp/sys/select.h
--- newlib-1.15.0/newlib/libc/sys/psp/sys/select.h 1970-01-01 01:00:00.000000000 +0100
+++ newlib-psp/newlib/libc/sys/psp/sys/select.h 2007-03-10 18:02:39.000000000 +0100
@@ -0,0 +1,54 @@
+/* $NetBSD: select.h,v 1.24 2005/05/22 12:44:24 kleink Exp $ */
+
+/*-
+ * Copyright (c) 1992, 1993
+ * The Regents of the University of California. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * @(#)select.h 8.2 (Berkeley) 1/4/94
+ */
+
+#ifndef _SYS_SELECT_H_
+#define _SYS_SELECT_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <sys/fd_set.h>
+#include <sys/time.h>
+
+int sceNetInetSelect(int n, fd_set *readfds, fd_set *writefds,
+ fd_set *exceptfds, struct timeval *timeout);
+
+int select(int n, fd_set *readfds, fd_set *writefds,
+ fd_set *exceptfds, struct timeval *timeout);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* !_SYS_SELECT_H_ */
diff -burN newlib-1.15.0/newlib/libc/sys/psp/sys/socket.h newlib-psp/newlib/libc/sys/psp/sys/socket.h
--- newlib-1.15.0/newlib/libc/sys/psp/sys/socket.h 1970-01-01 01:00:00.000000000 +0100
+++ newlib-psp/newlib/libc/sys/psp/sys/socket.h 2007-03-10 18:02:39.000000000 +0100
@@ -0,0 +1,294 @@
+/* $NetBSD: socket.h,v 1.77 2005/11/29 03:12:16 christos Exp $ */
+
+/*
+ * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the project nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+/*
+ * Copyright (c) 1982, 1985, 1986, 1988, 1993, 1994
+ * The Regents of the University of California. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * @(#)socket.h 8.6 (Berkeley) 5/3/95
+ */
+
+#ifndef _SYS_SOCKET_H_
+#define _SYS_SOCKET_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+#include <stddef.h>
+#include <sys/types.h>
+
+typedef uint8_t sa_family_t;
+typedef uint32_t socklen_t;
+
+/*
+ * Socket types.
+ */
+#define SOCK_STREAM 1 /* stream socket */
+#define SOCK_DGRAM 2 /* datagram socket */
+#define SOCK_RAW 3 /* raw-protocol interface */
+#define SOCK_RDM 4 /* reliably-delivered message */
+#define SOCK_SEQPACKET 5 /* sequenced packet stream */
+
+/*
+ * Option flags per-socket.
+ */
+#define SO_DEBUG 0x0001 /* turn on debugging info recording */
+#define SO_ACCEPTCONN 0x0002 /* socket has had listen() */
+#define SO_REUSEADDR 0x0004 /* allow local address reuse */
+#define SO_KEEPALIVE 0x0008 /* keep connections alive */
+#define SO_DONTROUTE 0x0010 /* just use interface addresses */
+#define SO_BROADCAST 0x0020 /* permit sending of broadcast msgs */
+#define SO_USELOOPBACK 0x0040 /* bypass hardware when possible */
+#define SO_LINGER 0x0080 /* linger on close if data present */
+#define SO_OOBINLINE 0x0100 /* leave received OOB data in line */
+#define SO_REUSEPORT 0x0200 /* allow local address & port reuse */
+#define SO_TIMESTAMP 0x0400 /* timestamp received dgram traffic */
+
+/*
+ * Additional options, not kept in so_options.
+ */
+#define SO_SNDBUF 0x1001 /* send buffer size */
+#define SO_RCVBUF 0x1002 /* receive buffer size */
+#define SO_SNDLOWAT 0x1003 /* send low-water mark */
+#define SO_RCVLOWAT 0x1004 /* receive low-water mark */
+#define SO_SNDTIMEO 0x1005 /* send timeout */
+#define SO_RCVTIMEO 0x1006 /* receive timeout */
+#define SO_ERROR 0x1007 /* get error status and clear */
+#define SO_TYPE 0x1008 /* get socket type */
+#define SO_OVERFLOWED 0x1009 /* datagrams: return packets dropped */
+#define SO_NONBLOCK 0x1009 /* non-blocking I/O */
+
+/*
+ * Structure used for manipulating linger option.
+ */
+struct linger {
+ int l_onoff; /* option on/off */
+ int l_linger; /* linger time in seconds */
+};
+
+/*
+ * Level number for (get/set)sockopt() to apply to socket itself.
+ */
+#define SOL_SOCKET 0xffff /* options for socket level */
+
+/*
+ * Address families.
+ */
+#define AF_UNSPEC 0 /* unspecified */
+#define AF_LOCAL 1 /* local to host (pipes, portals) */
+#define AF_UNIX AF_LOCAL /* backward compatibility */
+#define AF_INET 2 /* internetwork: UDP, TCP, etc. */
+#define AF_IMPLINK 3 /* arpanet imp addresses */
+#define AF_PUP 4 /* pup protocols: e.g. BSP */
+#define AF_CHAOS 5 /* mit CHAOS protocols */
+#define AF_NS 6 /* XEROX NS protocols */
+#define AF_ISO 7 /* ISO protocols */
+#define AF_OSI AF_ISO
+#define AF_ECMA 8 /* european computer manufacturers */
+#define AF_DATAKIT 9 /* datakit protocols */
+#define AF_CCITT 10 /* CCITT protocols, X.25 etc */
+#define AF_SNA 11 /* IBM SNA */
+#define AF_DECnet 12 /* DECnet */
+#define AF_DLI 13 /* DEC Direct data link interface */
+#define AF_LAT 14 /* LAT */
+#define AF_HYLINK 15 /* NSC Hyperchannel */
+#define AF_APPLETALK 16 /* Apple Talk */
+#define AF_ROUTE 17 /* Internal Routing Protocol */
+#define AF_LINK 18 /* Link layer interface */
+#define AF_COIP 20 /* connection-oriented IP, aka ST II */
+#define AF_CNT 21 /* Computer Network Technology */
+#define AF_IPX 23 /* Novell Internet Protocol */
+#define AF_INET6 24 /* IP version 6 */
+#define AF_ISDN 26 /* Integrated Services Digital Network*/
+#define AF_E164 AF_ISDN /* CCITT E.164 recommendation */
+#define AF_NATM 27 /* native ATM access */
+#define AF_ARP 28 /* (rev.) addr. res. prot. (RFC 826) */
+#define AF_MAX 31
+
+/*
+ * Structure used by kernel to store most
+ * addresses.
+ */
+struct sockaddr {
+ uint8_t sa_len; /* total length */
+ sa_family_t sa_family; /* address family */
+ char sa_data[14]; /* actually longer; address value */
+};
+
+/*
+ * Protocol families, same as address families for now.
+ */
+#define PF_UNSPEC AF_UNSPEC
+#define PF_LOCAL AF_LOCAL
+#define PF_UNIX PF_LOCAL /* backward compatibility */
+#define PF_INET AF_INET
+#define PF_IMPLINK AF_IMPLINK
+#define PF_PUP AF_PUP
+#define PF_CHAOS AF_CHAOS
+#define PF_NS AF_NS
+#define PF_ISO AF_ISO
+#define PF_OSI AF_ISO
+#define PF_ECMA AF_ECMA
+#define PF_DATAKIT AF_DATAKIT
+#define PF_CCITT AF_CCITT
+#define PF_SNA AF_SNA
+#define PF_DECnet AF_DECnet
+#define PF_DLI AF_DLI
+#define PF_LAT AF_LAT
+#define PF_HYLINK AF_HYLINK
+#define PF_APPLETALK AF_APPLETALK
+#define PF_ROUTE AF_ROUTE
+#define PF_LINK AF_LINK
+#if defined(_NETBSD_SOURCE)
+#define PF_XTP pseudo_AF_XTP /* really just proto family, no AF */
+#endif
+#define PF_COIP AF_COIP
+#define PF_CNT AF_CNT
+#define PF_INET6 AF_INET6
+#define PF_IPX AF_IPX /* same format as AF_NS */
+#if defined(_NETBSD_SOURCE)
+#define PF_RTIP pseudo_AF_RTIP /* same format as AF_INET */
+#define PF_PIP pseudo_AF_PIP
+#endif
+#define PF_ISDN AF_ISDN /* same as E164 */
+#define PF_E164 AF_E164
+#define PF_NATM AF_NATM
+#define PF_ARP AF_ARP
+#if defined(_NETBSD_SOURCE)
+#define PF_KEY pseudo_AF_KEY /* like PF_ROUTE, only for key mgmt */
+#endif
+
+#define PF_MAX AF_MAX
+
+#define MSG_OOB 0x1 /* process out-of-band data */
+#define MSG_PEEK 0x2 /* peek at incoming message */
+#define MSG_DONTROUTE 0x4 /* send without using routing tables */
+#define MSG_EOR 0x8 /* data completes record */
+#define MSG_TRUNC 0x10 /* data discarded before delivery */
+#define MSG_CTRUNC 0x20 /* control data lost before delivery */
+#define MSG_WAITALL 0x40 /* wait for full request or error */
+#define MSG_DONTWAIT 0x80 /* this message should be nonblocking */
+#define MSG_BCAST 0x100 /* this message was rcvd using link-level brdcst */
+#define MSG_MCAST 0x200 /* this message was rcvd using link-level mcast */
+
+/*
+ * Types of socket shutdown(2).
+ */
+#define SHUT_RD 0 /* Disallow further receives. */
+#define SHUT_WR 1 /* Disallow further sends. */
+#define SHUT_RDWR 2 /* Disallow further sends/receives. */
+
+struct iovec {
+ void *iov_base; /* Base address. */
+ size_t iov_len; /* Length. */
+};
+
+struct msghdr {
+ void *msg_name; /* optional address */
+ socklen_t msg_namelen; /* size of address */
+ struct iovec *msg_iov; /* scatter/gather array */
+ int msg_iovlen; /* # elements in msg_iov */
+ void *msg_control; /* ancillary data, see below */
+ socklen_t msg_controllen; /* ancillary data buffer len */
+ int msg_flags; /* flags on received message */
+};
+
+/* BSD-compatible socket API. */
+int accept(int, struct sockaddr * __restrict, socklen_t * __restrict);
+int bind(int, const struct sockaddr *, socklen_t);
+int connect(int, const struct sockaddr *, socklen_t);
+int getpeername(int, struct sockaddr * __restrict, socklen_t * __restrict);
+int getsockname(int, struct sockaddr * __restrict, socklen_t * __restrict);
+int getsockopt(int, int, int, void * __restrict, socklen_t * __restrict);
+int listen(int, int);
+ssize_t recv(int, void *, size_t, int);
+ssize_t recvfrom(int, void * __restrict, size_t, int,
+ struct sockaddr * __restrict, socklen_t * __restrict);
+ssize_t recvmsg(int s, struct msghdr *msg, int flags);
+ssize_t send(int, const void *, size_t, int);
+ssize_t sendto(int, const void *,
+ size_t, int, const struct sockaddr *, socklen_t);
+ssize_t sendmsg(int s, const struct msghdr *msg, int flags);
+int setsockopt(int, int, int, const void *, socklen_t);
+int shutdown(int, int);
+int socket(int, int, int);
+
+/* sceNetInet socket API. */
+int sceNetInetAccept(int s, struct sockaddr *addr, socklen_t *addrlen);
+int sceNetInetBind(int s, const struct sockaddr *my_addr, socklen_t addrlen);
+int sceNetInetConnect(int s, const struct sockaddr *serv_addr, socklen_t addrlen);
+int sceNetInetGetsockopt(int s, int level, int optname, void *optval, socklen_t *optlen);
+int sceNetInetListen(int s, int backlog);
+ssize_t sceNetInetRecv(int s, void *buf, size_t len, int flags);
+ssize_t sceNetInetRecvfrom(int s, void *buf, size_t flags, int, struct sockaddr *from, socklen_t *fromlen);
+ssize_t sceNetInetRecvmsg(int s, struct msghdr *msg, int flags);
+ssize_t sceNetInetSend(int s, const void *buf, size_t len, int flags);
+ssize_t sceNetInetSendto(int s, const void *buf, size_t len, int flags, const struct sockaddr *to, socklen_t tolen);
+ssize_t sceNetInetSendmsg(int s, const struct msghdr *msg, int flags);
+int sceNetInetSetsockopt(int s, int level, int optname, const void *optval, socklen_t optlen);
+int sceNetInetShutdown(int s, int how);
+int sceNetInetSocket(int domain, int type, int protocol);
+int sceNetInetClose(int s);
+int sceNetInetGetErrno(void);
+int sceNetInetGetsockname(int s, struct sockaddr *name, socklen_t *namelen);
+int sceNetInetGetpeername(int s, struct sockaddr *name, socklen_t *namelen);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* !_SYS_SOCKET_H_ */
diff -burN newlib-1.15.0/newlib/libc/sys/psp/xprintf.c newlib-psp/newlib/libc/sys/psp/xprintf.c
--- newlib-1.15.0/newlib/libc/sys/psp/xprintf.c 1970-01-01 01:00:00.000000000 +0100
+++ newlib-psp/newlib/libc/sys/psp/xprintf.c 2007-03-10 18:02:39.000000000 +0100
@@ -0,0 +1,984 @@
+/*
+ * PSP Software Development Kit - http://www.pspdev.org
+ * -----------------------------------------------------------------------
+ * Licensed under the BSD license, see LICENSE in PSPSDK root for details.
+ *
+ * xprintf.c - Various *printf functions.
+ *
+ * Copyright (c) 2005 Marcus R. Brown <mrbrown@ocgnet.org>
+ * Copyright (c) 2005 James Forshaw <tyranid@gmail.com>
+ * Copyright (c) 2005 John Kelley <ps2dev@kelley.ca>
+ *
+ * $Id: newlib-1.13.0.patch 1891 2006-05-02 15:32:28Z raf $
+ */
+/* Code borrowed from mysql's xprintf.c, by Richard Hipp */
+/* This xprintf.c file on which this one is based is in public domain. */
+
+#include <stdio.h>
+#include <string.h>
+#include <malloc.h>
+
+#include <stdarg.h>
+#include <stddef.h>
+
+/*
+** The maximum number of digits of accuracy in a floating-point conversion.
+*/
+#define MAXDIG 20
+
+/* Instead of including ctype.h, use the isdigit() prototype because psplibc doesn't
+ know about newlib, and newlib defines isdigit as a macro that uses _ctype_. */
+int isdigit(int __c);
+
+int vxprintf(void (*func)(char *, int, void *), void *arg, const char *format, va_list ap);
+
+#ifdef F_vxprintf
+/*
+** Conversion types fall into various categories as defined by the
+** following enumeration.
+*/
+
+enum e_type { /* The type of the format field */
+ RADIX, /* Integer types. %d, %x, %o, and so forth */
+ FLOAT, /* Floating point. %f */
+ EXP, /* Exponentional notation. %e and %E */
+ GENERIC, /* Floating or exponential, depending on exponent. %g */
+ SIZE, /* Return number of characters processed so far. %n */
+ STRING, /* Strings. %s */
+ PERCENT, /* Percent symbol. %% */
+ CHAR, /* Characters. %c */
+ ERROR, /* Used to indicate no such conversion type */
+/* The rest are extensions, not normally found in printf() */
+ CHARLIT, /* Literal characters. %' */
+ SEEIT, /* Strings with visible control characters. %S */
+ MEM_STRING, /* A string which should be deleted after use. %z */
+ ORDINAL, /* 1st, 2nd, 3rd and so forth */
+};
+
+/*
+** Each builtin conversion character (ex: the 'd' in "%d") is described
+** by an instance of the following structure
+*/
+typedef struct s_info { /* Information about each format field */
+ int fmttype; /* The format field code letter */
+ int base; /* The base for radix conversion */
+ char *charset; /* The character set for conversion */
+ int flag_signed; /* Is the quantity signed? */
+ char *prefix; /* Prefix on non-zero values in alt format */
+ enum e_type type; /* Conversion paradigm */
+} info;
+
+/*
+** The following table is searched linearly, so it is good to put the
+** most frequently used conversion types first.
+*/
+static info fmtinfo[] = {
+ { 'd', 10, "0123456789", 1, 0, RADIX, },
+ { 's', 0, 0, 0, 0, STRING, },
+ { 'S', 0, 0, 0, 0, SEEIT, },
+ { 'z', 0, 0, 0, 0, MEM_STRING, },
+ { 'c', 0, 0, 0, 0, CHAR, },
+ { 'o', 8, "01234567", 0, "0", RADIX, },
+ { 'u', 10, "0123456789", 0, 0, RADIX, },
+ { 'x', 16, "0123456789abcdef", 0, "x0", RADIX, },
+ { 'X', 16, "0123456789ABCDEF", 0, "X0", RADIX, },
+ { 'r', 10, "0123456789", 0, 0, ORDINAL, },
+ { 'f', 0, 0, 1, 0, FLOAT, },
+ { 'e', 0, "e", 1, 0, EXP, },
+ { 'E', 0, "E", 1, 0, EXP, },
+ { 'g', 0, "e", 1, 0, GENERIC, },
+ { 'G', 0, "E", 1, 0, GENERIC, },
+ { 'i', 10, "0123456789", 1, 0, RADIX, },
+ { 'n', 0, 0, 0, 0, SIZE, },
+ { 'S', 0, 0, 0, 0, SEEIT, },
+ { '%', 0, 0, 0, 0, PERCENT, },
+ { 'b', 2, "01", 0, "b0", RADIX, }, /* Binary notation */
+ { 'p', 16, "0123456789ABCDEF", 0, "x0", RADIX, }, /* Pointers */
+ { '\'', 0, 0, 0, 0, CHARLIT, }, /* Literal char */
+};
+#define NINFO (sizeof(fmtinfo)/sizeof(info)) /* Size of the fmtinfo table */
+
+/*
+** If NOFLOATINGPOINT is defined, then none of the floating point
+** conversions will work.
+*/
+#ifndef NOFLOATINGPOINT
+/*
+** "*val" is a double such that 0.1 <= *val < 10.0
+** Return the ascii code for the leading digit of *val, then
+** multiply "*val" by 10.0 to renormalize.
+**
+** Example:
+** input: *val = 3.14159
+** output: *val = 1.4159 function return = '3'
+**
+** The counter *cnt is incremented each time. After counter exceeds
+** 16 (the number of significant digits in a 64-bit float) '0' is
+** always returned.
+*/
+static int getdigit(long double *val, int *cnt){
+ int digit;
+ long double d;
+ if( (*cnt)++ >= MAXDIG ) return '0';
+ digit = (int)*val;
+ d = digit;
+ digit += '0';
+ *val = (*val - d)*10.0;
+ return digit;
+}
+#endif
+
+/*
+** Setting the size of the BUFFER involves trade-offs. No %d or %f
+** conversion can have more than BUFSIZE characters. If the field
+** width is larger than BUFSIZE, it is silently shortened. On the
+** other hand, this routine consumes more stack space with larger
+** BUFSIZEs. If you have some threads for which you want to minimize
+** stack space, you should keep BUFSIZE small.
+*/
+#define BUFSIZE 100 /* Size of the output buffer */
+
+/*
+** The root program. All variations call this core.
+**
+** INPUTS:
+** func This is a pointer to a function taking three arguments
+** 1. A pointer to the list of characters to be output
+** (Note, this list is NOT null terminated.)
+** 2. An integer number of characters to be output.
+** (Note: This number might be zero.)
+** 3. A pointer to anything. Same as the "arg" parameter.
+**
+** arg This is the pointer to anything which will be passed as the
+** third argument to "func". Use it for whatever you like.
+**
+** fmt This is the format string, as in the usual print.
+**
+** ap This is a pointer to a list of arguments. Same as in
+** vfprint.
+**
+** OUTPUTS:
+** The return value is the total number of characters sent to
+** the function "func". Returns -1 on a error.
+**
+** Note that the order in which automatic variables are declared below
+** seems to make a big difference in determining how fast this beast
+** will run.
+*/
+
+int vxprintf(func,arg,format,ap)
+ void (*func)(char*,int,void*);
+ void *arg;
+ const char *format;
+ va_list ap;
+{
+ register const char *fmt; /* The format string. */
+ register int c; /* Next character in the format string */
+ register char *bufpt; /* Pointer to the conversion buffer */
+ register int precision; /* Precision of the current field */
+ register int length; /* Length of the field */
+ register int idx; /* A general purpose loop counter */
+ int count; /* Total number of characters output */
+ int width; /* Width of the current field */
+ int flag_leftjustify; /* True if "-" flag is present */
+ int flag_plussign; /* True if "+" flag is present */
+ int flag_blanksign; /* True if " " flag is present */
+ int flag_alternateform; /* True if "#" flag is present */
+ int flag_zeropad; /* True if field width constant starts with zero */
+ int flag_long; /* True if "l" flag is present */
+ int flag_center; /* True if "=" flag is present */
+ unsigned long long longvalue; /* Value for integer types */
+
+ long double realvalue; /* Value for real types */
+ info *infop; /* Pointer to the appropriate info structure */
+ char buf[BUFSIZE]; /* Conversion buffer */
+ char prefix; /* Prefix character. "+" or "-" or " " or '\0'. */
+ int errorflag = 0; /* True if an error is encountered */
+ enum e_type xtype; /* Conversion paradigm */
+ char *zMem = 0; /* String to be freed */
+ static char spaces[] =
+ " ";
+#define SPACESIZE (sizeof(spaces)-1)
+#ifndef NOFLOATINGPOINT
+ int exp; /* exponent of real numbers */
+ long double rounder; /* Used for rounding floating point values */
+ int flag_dp; /* True if decimal point should be shown */
+ int flag_rtz; /* True if trailing zeros should be removed */
+ int flag_exp; /* True to force display of the exponent */
+ int nsd; /* Number of significant digits returned */
+#endif
+
+ fmt = format; /* Put in a register for speed */
+ count = length = 0;
+ bufpt = 0;
+ for(; (c=(*fmt))!=0; ++fmt){
+ if( c!='%' ){
+ register int amt;
+ bufpt = (char *)fmt;
+ amt = 1;
+ while( (c=(*++fmt))!='%' && c!=0 ) amt++;
+ (*func)(bufpt,amt,arg);
+ count += amt;
+ if( c==0 ) break;
+ }
+ if( (c=(*++fmt))==0 ){
+ errorflag = 1;
+ (*func)("%",1,arg);
+ count++;
+ break;
+ }
+ /* Find out what flags are present */
+ flag_leftjustify = flag_plussign = flag_blanksign =
+ flag_alternateform = flag_zeropad = flag_center = 0;
+ do{
+ switch( c ){
+ case '-': flag_leftjustify = 1; c = 0; break;
+ case '+': flag_plussign = 1; c = 0; break;
+ case ' ': flag_blanksign = 1; c = 0; break;
+ case '#': flag_alternateform = 1; c = 0; break;
+ case '0': flag_zeropad = 1; c = 0; break;
+ case '=': flag_center = 1; c = 0; break;
+ default: break;
+ }
+ }while( c==0 && (c=(*++fmt))!=0 );
+ if( flag_center ) flag_leftjustify = 0;
+ /* Get the field width */
+ width = 0;
+ if( c=='*' ){
+ width = va_arg(ap,int);
+ if( width<0 ){
+ flag_leftjustify = 1;
+ width = -width;
+ }
+ c = *++fmt;
+ }else{
+ while( isdigit(c) ){
+ width = width*10 + c - '0';
+ c = *++fmt;
+ }
+ }
+ if( width > BUFSIZE-10 ){
+ width = BUFSIZE-10;
+ }
+ /* Get the precision */
+ if( c=='.' ){
+ precision = 0;
+ c = *++fmt;
+ if( c=='*' ){
+ precision = va_arg(ap,int);
+#ifndef COMPATIBILITY
+ /* This is sensible, but SUN OS 4.1 doesn't do it. */
+ if( precision<0 ) precision = -precision;
+#endif
+ c = *++fmt;
+ }else{
+ while( isdigit(c) ){
+ precision = precision*10 + c - '0';
+ c = *++fmt;
+ }
+ }
+ /* Limit the precision to prevent overflowing buf[] during conversion */
+ if( precision>BUFSIZE-40 ) precision = BUFSIZE-40;
+ }else{
+ precision = -1;
+ }
+ /* Get the conversion type modifier */
+ if( c=='l' ){
+ flag_long = 1;
+ c = *++fmt;
+ if( c == 'l' ){
+ flag_long = 2;
+ c = *++fmt;
+ }
+ }else{
+ flag_long = 0;
+ }
+ /* Fetch the info entry for the field */
+ infop = 0;
+ for(idx=0; idx<NINFO; idx++){
+ if( c==fmtinfo[idx].fmttype ){
+ infop = &fmtinfo[idx];
+ break;
+ }
+ }
+ /* No info entry found. It must be an error. */
+ if( infop==0 ){
+ xtype = ERROR;
+ }else{
+ xtype = infop->type;
+ }
+
+ /*
+ ** At this point, variables are initialized as follows:
+ **
+ ** flag_alternateform TRUE if a '#' is present.
+ ** flag_plussign TRUE if a '+' is present.
+ ** flag_leftjustify TRUE if a '-' is present or if the
+ ** field width was negative.
+ ** flag_zeropad TRUE if the width began with 0.
+ ** flag_long TRUE if the letter 'l' (ell) prefixed
+ ** the conversion character.
+ ** flag_blanksign TRUE if a ' ' is present.
+ ** width The specified field width. This is
+ ** always non-negative. Zero is the default.
+ ** precision The specified precision. The default
+ ** is -1.
+ ** xtype The class of the conversion.
+ ** infop Pointer to the appropriate info struct.
+ */
+ switch( xtype ){
+ case ORDINAL:
+ case RADIX:
+ if(( flag_long>1 )&&( infop->flag_signed )){
+ signed long long t = va_arg(ap,signed long long);
+ longvalue = t;
+ }else if(( flag_long>1 )&&( !infop->flag_signed )){
+ unsigned long long t = va_arg(ap,unsigned long long);
+ longvalue = t;
+ }else if(( flag_long )&&( infop->flag_signed )){
+ signed long t = va_arg(ap,signed long);
+ longvalue = t;
+ }else if(( flag_long )&&( !infop->flag_signed )){
+ unsigned long t = va_arg(ap,unsigned long);
+ longvalue = t;
+ }else if(( !flag_long )&&( infop->flag_signed )){
+ signed int t = va_arg(ap,signed int) & ((unsigned long) 0xffffffff);
+ longvalue = t;
+ }else{
+ unsigned int t = va_arg(ap,unsigned int) & ((unsigned long) 0xffffffff);
+ longvalue = t;
+ }
+#ifdef COMPATIBILITY
+ /* For the format %#x, the value zero is printed "0" not "0x0".
+ ** I think this is stupid. */
+ if( longvalue==0 ) flag_alternateform = 0;
+#else
+ /* More sensible: turn off the prefix for octal (to prevent "00"),
+ ** but leave the prefix for hex. */
+ if( longvalue==0 && infop->base==8 ) flag_alternateform = 0;
+#endif
+ if( infop->flag_signed ){
+ if( *(long long*)&longvalue<0 ){
+ longvalue = -*(long long*)&longvalue;
+ prefix = '-';
+ }else if( flag_plussign ) prefix = '+';
+ else if( flag_blanksign ) prefix = ' ';
+ else prefix = 0;
+ }else prefix = 0;
+ if( flag_zeropad && precision<width-(prefix!=0) ){
+ precision = width-(prefix!=0);
+ }
+ bufpt = &buf[BUFSIZE];
+ if( xtype==ORDINAL ){
+ long a,b;
+ a = longvalue%10;
+ b = longvalue%100;
+ bufpt -= 2;
+ if( a==0 || a>3 || (b>10 && b<14) ){
+ bufpt[0] = 't';
+ bufpt[1] = 'h';
+ }else if( a==1 ){
+ bufpt[0] = 's';
+ bufpt[1] = 't';
+ }else if( a==2 ){
+ bufpt[0] = 'n';
+ bufpt[1] = 'd';
+ }else if( a==3 ){
+ bufpt[0] = 'r';
+ bufpt[1] = 'd';
+ }
+ }
+ {
+ register char *cset; /* Use registers for speed */
+ register int base;
+ cset = infop->charset;
+ base = infop->base;
+ do{ /* Convert to ascii */
+ *(--bufpt) = cset[longvalue%base];
+ longvalue = longvalue/base;
+ }while( longvalue>0 );
+ }
+ length = (int)(&buf[BUFSIZE]-bufpt);
+ if(infop->fmttype == 'p')
+ {
+ precision = 8;
+ flag_alternateform = 1;
+ }
+
+ for(idx=precision-length; idx>0; idx--){
+ *(--bufpt) = '0'; /* Zero pad */
+ }
+ if( prefix ) *(--bufpt) = prefix; /* Add sign */
+ if( flag_alternateform && infop->prefix ){ /* Add "0" or "0x" */
+ char *pre, x;
+ pre = infop->prefix;
+ if( *bufpt!=pre[0] ){
+ for(pre=infop->prefix; (x=(*pre))!=0; pre++) *(--bufpt) = x;
+ }
+ }
+
+ length = (int)(&buf[BUFSIZE]-bufpt);
+ break;
+ case FLOAT:
+ case EXP:
+ case GENERIC:
+ realvalue = va_arg(ap,double);
+#ifndef NOFLOATINGPOINT
+ if( precision<0 ) precision = 6; /* Set default precision */
+ if( precision>BUFSIZE-10 ) precision = BUFSIZE-10;
+ if( realvalue<0.0 ){
+ realvalue = -realvalue;
+ prefix = '-';
+ }else{
+ if( flag_plussign ) prefix = '+';
+ else if( flag_blanksign ) prefix = ' ';
+ else prefix = 0;
+ }
+ if( infop->type==GENERIC && precision>0 ) precision--;
+ rounder = 0.0;
+#ifdef COMPATIBILITY
+ /* Rounding works like BSD when the constant 0.4999 is used. Wierd! */
+ for(idx=precision, rounder=0.4999; idx>0; idx--, rounder*=0.1);
+#else
+ /* It makes more sense to use 0.5 */
+ if( precision>MAXDIG-1 ) idx = MAXDIG-1;
+ else idx = precision;
+ for(rounder=0.5; idx>0; idx--, rounder*=0.1);
+#endif
+ if( infop->type==FLOAT ) realvalue += rounder;
+ /* Normalize realvalue to within 10.0 > realvalue >= 1.0 */
+ exp = 0;
+ if( realvalue>0.0 ){
+ int k = 0;
+ while( realvalue>=1e8 && k++<100 ){ realvalue *= 1e-8; exp+=8; }
+ while( realvalue>=10.0 && k++<100 ){ realvalue *= 0.1; exp++; }
+ while( realvalue<1e-8 && k++<100 ){ realvalue *= 1e8; exp-=8; }
+ while( realvalue<1.0 && k++<100 ){ realvalue *= 10.0; exp--; }
+ if( k>=100 ){
+ bufpt = "NaN";
+ length = 3;
+ break;
+ }
+ }
+ bufpt = buf;
+ /*
+ ** If the field type is GENERIC, then convert to either EXP
+ ** or FLOAT, as appropriate.
+ */
+ flag_exp = xtype==EXP;
+ if( xtype!=FLOAT ){
+ realvalue += rounder;
+ if( realvalue>=10.0 ){ realvalue *= 0.1; exp++; }
+ }
+ if( xtype==GENERIC ){
+ flag_rtz = !flag_alternateform;
+ if( exp<-4 || exp>precision ){
+ xtype = EXP;
+ }else{
+ precision = precision - exp;
+ xtype = FLOAT;
+ }
+ }else{
+ flag_rtz = 0;
+ }
+ /*
+ ** The "exp+precision" test causes output to be of type EXP if
+ ** the precision is too large to fit in buf[].
+ */
+ nsd = 0;
+ if( xtype==FLOAT && exp+precision<BUFSIZE-30 ){
+ flag_dp = (precision>0 || flag_alternateform);
+ if( prefix ) *(bufpt++) = prefix; /* Sign */
+ if( exp<0 ) *(bufpt++) = '0'; /* Digits before "." */
+ else for(; exp>=0; exp--) *(bufpt++) = getdigit(&realvalue,&nsd);
+ if( flag_dp ) *(bufpt++) = '.'; /* The decimal point */
+ for(exp++; exp<0 && precision>0; precision--, exp++){
+ *(bufpt++) = '0';
+ }
+ while( (precision--)>0 ) *(bufpt++) = getdigit(&realvalue,&nsd);
+ *(bufpt--) = 0; /* Null terminate */
+ if( flag_rtz && flag_dp ){ /* Remove trailing zeros and "." */
+ while( bufpt>=buf && *bufpt=='0' ) *(bufpt--) = 0;
+ if( bufpt>=buf && *bufpt=='.' ) *(bufpt--) = 0;
+ }
+ bufpt++; /* point to next free slot */
+ }else{ /* EXP or GENERIC */
+ flag_dp = (precision>0 || flag_alternateform);
+ if( prefix ) *(bufpt++) = prefix; /* Sign */
+ *(bufpt++) = getdigit(&realvalue,&nsd); /* First digit */
+ if( flag_dp ) *(bufpt++) = '.'; /* Decimal point */
+ while( (precision--)>0 ) *(bufpt++) = getdigit(&realvalue,&nsd);
+ bufpt--; /* point to last digit */
+ if( flag_rtz && flag_dp ){ /* Remove tail zeros */
+ while( bufpt>=buf && *bufpt=='0' ) *(bufpt--) = 0;
+ if( bufpt>=buf && *bufpt=='.' ) *(bufpt--) = 0;
+ }
+ bufpt++; /* point to next free slot */
+ if( exp || flag_exp ){
+ *(bufpt++) = infop->charset[0];
+ if( exp<0 ){ *(bufpt++) = '-'; exp = -exp; } /* sign of exp */
+ else { *(bufpt++) = '+'; }
+ if( exp>=100 ){
+ *(bufpt++) = (exp/100)+'0'; /* 100's digit */
+ exp %= 100;
+ }
+ *(bufpt++) = exp/10+'0'; /* 10's digit */
+ *(bufpt++) = exp%10+'0'; /* 1's digit */
+ }
+ }
+ /* The converted number is in buf[] and zero terminated. Output it.
+ ** Note that the number is in the usual order, not reversed as with
+ ** integer conversions. */
+ length = (int)(bufpt-buf);
+ bufpt = buf;
+
+ /* Special case: Add leading zeros if the flag_zeropad flag is
+ ** set and we are not left justified */
+ if( flag_zeropad && !flag_leftjustify && length < width){
+ int i;
+ int nPad = width - length;
+ for(i=width; i>=nPad; i--){
+ bufpt[i] = bufpt[i-nPad];
+ }
+ i = prefix!=0;
+ while( nPad-- ) bufpt[i++] = '0';
+ length = width;
+ }
+#endif
+ break;
+ case SIZE:
+ *(va_arg(ap,int*)) = count;
+ length = width = 0;
+ break;
+ case PERCENT:
+ buf[0] = '%';
+ bufpt = buf;
+ length = 1;
+ break;
+ case CHARLIT:
+ case CHAR:
+ c = buf[0] = (xtype==CHAR ? va_arg(ap,int) : *++fmt);
+ if( precision>=0 ){
+ for(idx=1; idx<precision; idx++) buf[idx] = c;
+ length = precision;
+ }else{
+ length =1;
+ }
+ bufpt = buf;
+ break;
+ case STRING:
+ case MEM_STRING:
+ zMem = bufpt = va_arg(ap,char*);
+ if( bufpt==0 ) bufpt = "(null)";
+ length = strlen(bufpt);
+ if( precision>=0 && precision<length ) length = precision;
+ break;
+ case SEEIT:
+ {
+ int i;
+ int c;
+ char *arg = va_arg(ap,char*);
+ for(i=0; i<BUFSIZE-1 && (c = *arg++)!=0; i++){
+ if( c<0x20 || c>=0x7f ){
+ buf[i++] = '^';
+ buf[i] = (c&0x1f)+0x40;
+ }else{
+ buf[i] = c;
+ }
+ }
+ bufpt = buf;
+ length = i;
+ if( precision>=0 && precision<length ) length = precision;
+ }
+ break;
+ case ERROR:
+ buf[0] = '%';
+ buf[1] = c;
+ errorflag = 0;
+ idx = 1+(c!=0);
+ (*func)("%",idx,arg);
+ count += idx;
+ if( c==0 ) fmt--;
+ break;
+ }/* End switch over the format type */
+ /*
+ ** The text of the conversion is pointed to by "bufpt" and is
+ ** "length" characters long. The field width is "width". Do
+ ** the output.
+ */
+ if( !flag_leftjustify ){
+ register int nspace;
+ nspace = width-length;
+ if( nspace>0 ){
+ if( flag_center ){
+ nspace = nspace/2;
+ width -= nspace;
+ flag_leftjustify = 1;
+ }
+ count += nspace;
+ while( nspace>=SPACESIZE ){
+ (*func)(spaces,SPACESIZE,arg);
+ nspace -= SPACESIZE;
+ }
+ if( nspace>0 ) (*func)(spaces,nspace,arg);
+ }
+ }
+ if( length>0 ){
+ (*func)(bufpt,length,arg);
+ count += length;
+ }
+ if( xtype==MEM_STRING && zMem ){
+ free(zMem);
+ }
+ if( flag_leftjustify ){
+ register int nspace;
+ nspace = width-length;
+ if( nspace>0 ){
+ count += nspace;
+ while( nspace>=SPACESIZE ){
+ (*func)(spaces,SPACESIZE,arg);
+ nspace -= SPACESIZE;
+ }
+ if( nspace>0 ) (*func)(spaces,nspace,arg);
+ }
+ }
+ }/* End for loop over the format string */
+ return errorflag ? -1 : count;
+} /* End of function */
+#endif
+
+#ifdef F__xprintf
+/*
+** This non-standard function is still occasionally useful....
+*/
+int xprintf(
+ void (*func)(char*,int,void*),
+ void *arg,
+ const char *format,
+ ...
+){
+ va_list ap;
+ va_start(ap,format);
+ return vxprintf(func,arg,format,ap);
+}
+#endif
+
+/*
+** Now for string-print, also as found in any standard library.
+** Add to this the snprint function which stops added characters
+** to the string at a given length.
+**
+** Note that snprint returns the length of the string as it would
+** be if there were no limit on the output.
+*/
+struct s_strargument { /* Describes the string being written to */
+ char *next; /* Next free slot in the string */
+ char *last; /* Last available slot in the string */
+};
+
+void __sout(char *, int, void *);
+#ifdef F___sout
+void __sout(txt,amt,arg)
+ char *txt;
+ int amt;
+ void *arg;
+{
+ register char *head;
+ register const char *t;
+ register int a;
+ register char *tail;
+ a = amt;
+ t = txt;
+ head = ((struct s_strargument*)arg)->next;
+ tail = ((struct s_strargument*)arg)->last;
+ if( tail ){
+ while( a-- >0 && head<tail ) *(head++) = *(t++);
+ }else{
+ while( a-- >0 ) *(head++) = *(t++);
+ }
+ *head = 0;
+ ((struct s_strargument*)arg)->next = head;
+}
+#endif
+
+#ifdef F_vsnprintf
+int vsnprintf(char *buf, size_t n, const char *fmt, va_list ap){
+ struct s_strargument arg;
+ arg.next = buf;
+ arg.last = &buf[n-1];
+ *buf = 0;
+ return vxprintf(__sout,&arg,fmt,ap);
+}
+#endif
+
+#ifdef F_snprintf
+int snprintf(char *str, size_t sz, const char *format, ...)
+{
+ va_list args;
+ struct s_strargument arg;
+ int ret;
+
+ arg.next = str;
+ arg.last = &str[sz-1];
+
+ va_start(args, format);
+ ret = vxprintf(__sout, &arg, format, args);
+ va_end(args);
+
+ return ret;
+}
+#endif
+
+#ifdef F_vsprintf
+int vsprintf(char *buf, const char *fmt, va_list ap){
+ struct s_strargument arg;
+ arg.next = buf;
+ arg.last = NULL;
+ *buf = 0;
+ return vxprintf(__sout,&arg,fmt,ap);
+}
+#endif
+
+#ifdef F_sprintf
+int sprintf (char *str, const char *format, ...)
+{
+ va_list args;
+ struct s_strargument arg;
+ int ret;
+
+ arg.next = str;
+ arg.last = NULL;
+
+ va_start(args, format);
+ ret = vxprintf(__sout, &arg, format, args);
+ va_end(args);
+
+ return ret;
+}
+#endif
+
+/*
+** The following section of code handles the mprintf routine, that
+** writes to memory obtained from malloc().
+*/
+
+/* This structure is used to store state information about the
+** write in progress
+*/
+struct sgMprintf {
+ char *zBase; /* A base allocation */
+ char *zText; /* The string collected so far */
+ int nChar; /* Length of the string so far */
+ int nAlloc; /* Amount of space allocated in zText */
+};
+
+void __mout(char *, int, void*);
+
+#ifdef F___mout
+/* The xprintf callback function. */
+void __mout(zNewText,nNewChar,arg)
+ char *zNewText;
+ int nNewChar;
+ void *arg;
+{
+ struct sgMprintf *pM = (struct sgMprintf*)arg;
+ if( pM->nChar + nNewChar + 1 > pM->nAlloc ){
+ pM->nAlloc = pM->nChar + nNewChar*2 + 1;
+ if( pM->zText==pM->zBase ){
+ pM->zText = malloc(pM->nAlloc);
+ if( pM->zText && pM->nChar ) memcpy(pM->zText,pM->zBase,pM->nChar);
+ }else{
+ pM->zText = realloc(pM->zText, pM->nAlloc);
+ }
+ }
+ if( pM->zText ){
+ memcpy(&pM->zText[pM->nChar], zNewText, nNewChar);
+ pM->nChar += nNewChar;
+ pM->zText[pM->nChar] = 0;
+ }
+}
+#endif
+
+/*
+** mprintf() works like printf(), but allocations memory to hold the
+** resulting string and returns a pointer to the allocated memory.
+**
+** We changed the name to TclMPrint() to conform with the Tcl private
+** routine naming conventions.
+*/
+
+#ifdef F_mprintf
+char *mprintf(const char *zFormat, ...){
+ va_list ap;
+ struct sgMprintf sMprintf;
+ char *zNew;
+ char zBuf[200];
+
+ va_start(ap,zFormat);
+ sMprintf.nChar = 0;
+ sMprintf.nAlloc = sizeof(zBuf);
+ sMprintf.zText = zBuf;
+ sMprintf.zBase = zBuf;
+ vxprintf(__mout,&sMprintf,zFormat,ap);
+ va_end(ap);
+ if( sMprintf.zText==sMprintf.zBase ){
+ zNew = malloc( sMprintf.nChar+1 );
+ if( zNew ) strcpy(zNew,zBuf);
+ }else{
+ zNew = realloc(sMprintf.zText,sMprintf.nChar+1);
+ }
+
+ return zNew;
+}
+#endif
+
+/* This is the varargs version of mprintf.
+**
+** The name is changed to TclVMPrintf() to conform with Tcl naming
+** conventions.
+*/
+#ifdef F_vmprintf
+char *vmprintf(const char *zFormat,va_list ap){
+ struct sgMprintf sMprintf;
+ char zBuf[200];
+ sMprintf.nChar = 0;
+ sMprintf.zText = zBuf;
+ sMprintf.nAlloc = sizeof(zBuf);
+ sMprintf.zBase = zBuf;
+ vxprintf(__mout,&sMprintf,zFormat,ap);
+ if( sMprintf.zText==sMprintf.zBase ){
+ sMprintf.zText = malloc( strlen(zBuf)+1 );
+ if( sMprintf.zText ) strcpy(sMprintf.zText,zBuf);
+ }else{
+ sMprintf.zText = realloc(sMprintf.zText,sMprintf.nChar+1);
+ }
+ return sMprintf.zText;
+}
+#endif
+
+#ifdef F_asprintf
+int asprintf(char ** strp, const char *zFormat, ...){
+ va_list ap;
+ struct sgMprintf sMprintf;
+ char *zNew;
+ char zBuf[200];
+
+ va_start(ap,zFormat);
+ sMprintf.nChar = 0;
+ sMprintf.nAlloc = sizeof(zBuf);
+ sMprintf.zText = zBuf;
+ sMprintf.zBase = zBuf;
+ vxprintf(__mout,&sMprintf,zFormat,ap);
+ va_end(ap);
+ if( sMprintf.zText==sMprintf.zBase ){
+ zNew = malloc( sMprintf.nChar+1 );
+ if( zNew ) strcpy(zNew,zBuf);
+ }else{
+ zNew = realloc(sMprintf.zText,sMprintf.nChar+1);
+ }
+
+ *strp = zNew;
+
+ return sMprintf.nChar+1;
+}
+#endif
+
+#ifdef F_vasprintf
+int vasprintf(char **strp, const char *format, va_list ap) {
+ struct sgMprintf sMprintf;
+ char zBuf[200];
+ sMprintf.nChar = 0;
+ sMprintf.zText = zBuf;
+ sMprintf.nAlloc = sizeof(zBuf);
+ sMprintf.zBase = zBuf;
+ vxprintf(__mout,&sMprintf,format,ap);
+ if( sMprintf.zText==sMprintf.zBase ){
+ sMprintf.zText = malloc( strlen(zBuf)+1 );
+ if( sMprintf.zText ) strcpy(sMprintf.zText,zBuf);
+ }else{
+ sMprintf.zText = realloc(sMprintf.zText,sMprintf.nChar+1);
+ }
+ *strp = sMprintf.zText;
+ return sMprintf.nChar;
+}
+#endif
+
+/*
+** The following section of code handles the standard fprintf routines
+** for pthreads.
+*/
+
+void __fout(char *, int, void *);
+
+#ifdef F___fout
+void __fout(zNewText,nNewChar,arg)
+ char *zNewText;
+ int nNewChar;
+ void *arg;
+{
+ fwrite(zNewText,1,nNewChar,(FILE*)arg);
+}
+#endif
+
+#ifdef F_fprintf
+/* The public interface routines */
+int fprintf(FILE *pOut, const char *zFormat, ...){
+ va_list ap;
+ int retc;
+
+ va_start(ap,zFormat);
+ retc = vxprintf(__fout,pOut,zFormat,ap);
+ va_end(ap);
+ return retc;
+}
+#endif
+
+#ifdef F_vfprintf
+int vfprintf(FILE *pOut, const char *zFormat, va_list ap){
+ return vxprintf(__fout,pOut,zFormat,ap);
+}
+#endif
+
+
+#ifdef F_printf
+int printf(const char *format, ...)
+{
+ va_list args;
+ int ret;
+
+ va_start(args, format);
+ ret = vprintf(format, args);
+ va_end(args);
+
+ return ret;
+}
+#endif
+
+#ifdef F_vprintf
+int vprintf(const char *format, va_list args)
+{
+ return vxprintf(__fout, stdout, format, args);
+}
+#endif
+
+#ifdef F__sprintf_r
+/* Idiotic kludge to get around newlib stupidity. tmpnam() calls this
+ directly, but since sprintf() above replaces newlib's sprintf() (and
+ _sprintf_r()) we have to define this in order to link tmpnam(). */
+int _sprintf_r(struct _reent *unused, char *str, const char *format, ...)
+{
+ va_list args;
+ struct s_strargument arg;
+ int ret;
+
+ (void) unused;
+ arg.next = str;
+ arg.last = NULL;
+
+ va_start(args, format);
+ ret = vxprintf(__sout, &arg, format, args);
+ va_end(args);
+
+ return ret;
+}
+#endif